Product Description

If your creativity happens in a studio environment with multiple MIDI devices, the UM-550 provides 5x5 near-zero-latency MIDI interface and patcher to make your work faster, easier. 5-in, 5-out interface controls up to 80 channels. Functions as a standalone MIDI patcher without connection to computer. Fast and stable transmission due to Fast Processing Technology. Features convenient MIDI utility functions (merge, MIDI message filter, preview, and cable check). Ability to connect as many as 4 units at once to the computer for a total of 320 channels. 3/4 rackspace. ... Read more

Features

• 5-in/5-out USB MIDI interface to computer (controls up to 80 channels)
• Standalone hardware MIDI patcher without connection to computer
• Quick patching, easy operation, and low latency with HDMR (Hardware Direct MIDI Routing)
• Fast and stable MIDI data transmission realized by FPT (Fast Processing Technology)
• Comfortable patching operation with LED switches on the front panel

Product Description

The PC-MIDI Flyer is a simple 2 input, 2 output, 32-MIDI channel interface for IBM PC and compatibles. No other PC MIDI interface comes close to this many features at its price. ... Read more

Features

• Fully independent MIDI ports provide 32 separate MIDI channels
• Installs in seconds and opens your computer to a world of music software
• No clunky power supply needed (draws power from the PC parallel port)
• Compatible with virtually all Windows MIDI software, including Windows 3
• 1 and Windows 95

Product Description

One-in, 2-out MIDI data router/filter allows selected MIDI messages to be routed to either, both, or neither of its 2 outputs. It can route/filter selected ranges of most MIDI data types, and messages can also be rechannelized to any other MIDI channel. A total of 10 settings are stored in a priority format and it is programmed by sending MIDI System Exclusive messages via Processors Programming Tools software. Settings are retained even after power is removed. MIDI-powered with MIDI indicator LED. 4.0 oz. 4-1/2"W x 2-1/2"H x 1-1/4"D. ... Read more

Features

• One-in, 2-out MIDI data router/filter
• 2 outputs
• 10 settings
• Processors Programming Tools software
• MIDI-powered

Product Description

The MIDI Solutions Velocity Converter applies selected velocity curves to incoming MIDI velocity data. Curves may be selected from 40 presets or a user defined curve. Each MIDI channel may be assigned a unique curve, allowing a MIDI controller's velocity sensitivity to be matched to individual sound modules in a MIDI setup. Velocities may also be assigned based on a selected incoming Control Change value. All settings are retained even after power is removed from the unit. The Velocity Converter is programmed by sending it MIDI System Exclusive messages. Once programmed, its settings are retained even after power is removed.The Velocity Converter is MIDI-powered and requires no batteries or power supply to operate. A MIDI indicator LED lights up when the product is powered and flashes when MIDI data passes through it. ... Read more

Features

• Applies selected velocity curves to incoming MIDI velocity data
• 40 preset curves
• User-definable curves
• Each MIDI channel may be assigned a unique curve
• Velocities assignable on a selected incoming Control Change value

Product Description

The Pedal Controller accepts a pedal (or any potentiometer connected to a 1/4" stereo phone plug) as an input and generates continuous MIDI data based on its position. The Pedal Controller may be inserted inline at any point in the MIDI data stream, allowing you to send continuous controller information to any device in your MIDI setup.The MIDI Solutions Pedal Controller can be programmed to send most types of continuous MIDI messages, including Aftertouch, Pitch Bend, Control Change, or even System Exclusive messages with a single variable byte (to control specific synth parameters). The MIDI channel is programmable as are the minimum and maximum values transmitted.The Pedal Controller accurately tracks the position of the pedal or potentiometer connected to it. If the pedal is moved very slightly, the Pedal Controller will send an update even if its position has only changed by a single value. Many cheaper control wheels or knobs only update themselves every 2 or every 4 values, resulting in zipper noise.Another unique feature of the Pedal Controller is its ability to add a variable amount of curvature to the response of the pedal. This allows you to correct for pedals with nonlinear responses, or to add greater response at one end of the pedal compared to the other.The Pedal Controller is programmed by sending it MIDI System Exclusive messages. Once programmed, its settings are retained even after power... ... Read more

Features

• Accepts a pedal or any potentiometer connected to a 1/4" stereo phone plug
• Generates continuous MIDI data based on its position
• May be inserted inline at any point in the MIDI data stream
• Send continuous controller information to any device in your MIDI setup
• Sends Aftertouch, Pitch Bend, Control Change, or even System Exclusive messages with a single variable byte (to control specific synth parameters)

Product Description

The MIDI Solutions Footswitch Controller provides a 1/4" phone jack input for connection to a footswitch or contact closure which can be used to trigger MIDI events. Triggered MIDI events are merged with incoming MIDI messages and sent to the MIDI output of the Footswitch Controller. Triggered event types are programmable and include: Note, Control Change, Pitch Bend, Program Change, Start/Stop, and System Exclusive. Other functions include: Program Change INC/DEC, Channelize, Transpose, Tempo Tap, and Note-on Filter. MIDI Echo and Footswitch Toggle parameters are selectable on/off. The Polarity of the footswitch can be determined automatically on power-up, or programmed to normally-open or normally-closed. The Footswitch Controller is programmed by sending it MIDI System Exclusive messages. This can be done easily with the Processors Programming Tools software. Once programmed, its settings are retained even after power is removed. The Footswitch Controller can be reprogrammed with new settings as often as needed.The Footswitch Controller is MIDI-powered and requires no batteries or power supply to operate. A MIDI indicator LED lights up when the product is powered and flashes when MIDI data passes through it. ... Read more

Product Description

The MIDI Solutions Mapper maps MIDI messages from one type to another type in real time. The Mapper will accept a total of 10 settings, each of which describe an input message type to be mapped and an output message type. Settings are stored in a priority format - if 2 settings conflict the higher priority setting takes precedence. The Mapper is programmed by sending it MIDI System Exclusive messages. This can be done easily with the Programming Tools software. Once programmed, its settings are retained even after power is removed. The Mapper can be reprogrammed with new settings as often as needed.The Mapper is MIDI-powered and requires no batteries or power supply to operate. An LED lights when powered and flashes when MIDI data passes through it. ... Read more

Product Description

Fast and stable MIDI data transmission realized by Fast Processing Technology of MIDI transmission. Controls up to 32 channels of MIDI. Adapter-free bus-type power supply through PC. Signal indicators for 2 ins and 2 outs. ... Read more

Features

• Fast and stable MIDI data transmission
• Controls up to 32 channels of MIDI
• Adapter-free bus-type power supply through PC
• Signal indicators for 2-ins and 2-outs
• Macintosh System Requirements: