Product Description

Automotive body panels are typically constructed of thin sheet metal, plastic or fiberglass.VB2 speaker damping pads are easy to install and an effective way to deaden body panel vibration while improving midbass response from auto sound speaker systems.Quite simply, it's the easiest upgrade you can make!Kit includes two 10" x 10" VB2 damping pads, enough for two speakers.Mfg. #SK-1. ... Read more

Product Description

Our Super Wedge acoustic wall tiles were designed to help control low frequency response problems within a room.Virtually all rooms have 90° corners where two walls come together and meet a flat ceiling.This corner commonly referred as a "trihedral corner" can boost bass frequencies as much as 9 dB!By placing Super Wedge tiles in the corners (in an alternating pattern) from floor to ceiling, these low frequency anomalies can be controlled. Note: We recommend you start with Super Wedges in each corner.If the problem persists, you can add more wedges horizontally from the corner along the wall / ceiling juncture. The wedges are made of open cell, flame retardant polyester foam that meets UL94 rating.The design is very pleasing to the eye while offering outstanding low frequency sound absorption qualities.Practical 12" x 12" tile size makes installation a snap.The perfect solution for recording studios , auditoriums , home theatre , anechoic chambers , radio stations and more.Tiles easily installed with any foam spray adhesive, we recommend 3M Hi-Strength 90. Tile size is 12" x 12" x 5".Sold individually.Charcoal gray color.Net weight per tile: 1/2 lb. ... Read more

Product Description

The MAX-Wall is the perfect solution if you're in a rented space and don't want to, or can't mount anything to your walls. Or if your place needs to serve a variety of acoustical purposes. Or if you're on a budget and have acoustical problems that can't wait. Or if you're the sort who likes to mix things up on the fly. MAX-Wall will keep pace with YOUR busy schedule. Turn ANY room into a temporary performance or mixing space. ... Read more

Product Description

VB-TS is an adhesive backed, low profile combination thermal barrier and acoustic absorber.The 3/8" high temperature acoustic foam traps air and acts as an insulator while the aluminum mylar surface reflects engine heat.Additionally, the foam will absorb midband and high frequency mechanical noise generated by engine components.Designed primarily for engine compartments and other high heat areas. ... Read more

Product Description

Both VB-3 and VB-4 are designed to yield maximum attenuation over a broad frequency range.Both offer a significantly higher transmission loss than damper alone.The VB-3 with its lead septum is used in areas where highly flexible and moldable barriers are required, like firewalls and transmission tunnels.The VB-4 with its loaded vinyl barrier is better suited for flat, high impact and high traffic areas, like trunks, floorpans and truck beds.Cabin flooring for both RV and marine are also excellent application areas.VB-3/VB-4 thickness: .250".Not adhesive backed. ... Read more

Product Description

The same cut as the DST-112, but running lengthwise in a 2' x 4' panel. This cut allows for some great complementary pieces to coordinate with DST-114 or DST-244, as well as traditional Auralex products. Easily cut to 6" x 48" pieces, they make great borders to finish off almost all Auralex products -- very cool! Suggested adhesive is one Foamtak or 3 Tubetak (per 96 sq. ft.). ... Read more

Features

• 2' x 4' panel

Product Description

Auralex's ELiTE B24 ProPanels are decorative, fabric-wrapped Class A rated absorptive fiberglass panels that are always in stock and ready to deliver on a moments notice. Box of 6 - 48 square feet. ... Read more

Product Description

2" Studiofoam wedges are great overall absorbers! Use 'em to treat small- to medium-sized areas including vocal booths, control rooms, and sound studios. They effectively kill standing waves and flutter echoes and - when used in conjunction with LENRD or Venus Bass Traps or Sunburst Broadband Absorbers - can effectively tame the full frequency bandwidth in virtually any room. 2" acoustic Studiofoam is an industry workhorse and is your safest bet if you're tuning your room yourself without the help of a professional acoustician. ... Read more

Features

• Includes 12- 2'x4' foam pieces (96 sq. ft.).

Product Description

The micro Express is a mini version of the MIDI Express XT. It has many of the same features as the Express XTexcept that it is smaller and even more affordable. The micro Express is a half-rack unit with 4 inputs and 6 outputs. ... Read more

Features

• MIDI interface for Macintosh and Windows
• Can connect both a Mac and a PC at the same time
• Standalone MIDI patchbay/merger/processor
• SMPTE tape sync in all formats
• 4 x 6 MIDI merge matrix - connects any device to any other

Product Description

Auralex's most popular studiofoam seller and best overall performer. 2 inch Studiofoam Wedges treat most small to medium sized areas including vocal booths, sound control rooms and sound studios. These Studiofoam Wedges effectively kill standing waves and flutter echoes and, when used in conjunction with LENRD Bass Traps, Venus Bass Traps or Sunburst Broadband Sound Absorbers, can effectively tame the full frequency bandwidth in virtually any size room. 2 inch Acoustic Studiofoam is simply the workhorse of the sound control industry. ... Read more

Features

• Includes 12- 2' x 4' foam pieces (96 sq. ft.).

Product Description

The D36 offers you a starting point to reduce unwanted slap and flutter echo in your room and that designer look. Contains 18 Charcoal Gray DST-112 panels and 18 DST-114 panels in your choice of Charcoal Gray, Purple, Burgundy, or Blue with 2 TubeTak Pro Adhesives. ... Read more

Product Description

SheetBlok is a dense, limp-mass vinyl material that is about 6 dB more effective than a sheet of solid lead at stopping the transmission of sound. 4x10 roll,covers 40 square feet. ... Read more

Features

• 4âx10â pieces (40 sq
• )Color: Black (smooth on one side; has a pebble grain finish on the other) or clear (special order; subject to availability); STC: 27; Thickness: 1/8
• ; Service Temperature: -40° to 180° F; Tensile Strength: 400 psi Tear Strength: 70#/inch; Flammability: Rated UL94 S

Product Description

Improving the acoustics of your room is as easy as 1-2-3 with Roominators by Auralex Acoustics! Roominators will eliminate flutter and slapback echoes, tame nasty room modes and control reflected sound, allowing you to hear your music or soundtrack as it was intended. Roominators are perfect for use in project studios, listening rooms, home theaters, practice rooms or anyplace where accurate sound is important. ... Read more

Features

• The Project 2 Kit is designed primarily for rooms with a floor square footage of <100 ft/sq
• The shortest room dimension should be 8-12 feet
• (24) Studiofoam 2âx2âx2
• (8) LENRD Bass Traps;

Product Description

Insulation designed for acoustical usage. WAY better than that 'pink stuff.' ... Read more

Product Description

MIDI interface and SMPTE synchronizer for Macintosh and IBM PC/compatibles running Windows*. Provides 8 MIDI IN, 9 MIDI OUT, and 128 MIDI channels. Plug-and-play compatible with all Macintosh and Windows software. Sixteen convenient, one-touch front-panel presets (8 factory and 8 user programmable). Software console for both Mac and Windows provides comprehensive routing, merging, and muting. Converts and stripes SMPTE in all frame formats (24, 25, 29.97 drop and non-drop, and 30). SMPTE jam sync with adjustable freewheeling for drop-out free sync. Supports MIDI Machine Control. Serves as either an MMC master or slave; distributes MMC transport commands to all other MMC devices. Pedal input for momentary foot switch or audio click-to-MIDI conversion. Internal power supply (no wall-warts!). No other MIDI interface offers this much value at such an affordable price. ... Read more

Features

• MIDI interface and SMPTE synchronizer for Macand Windows
• 8 MIDI in, 9 MIDI out, and 128 MIDI channels
• Plug-and-play compatible with all Mac and Windows software
• 16 convenient, one-touch front-panel presets (8 factory and 8 user programmable)
• Virtual software console provides comprehensive routing, merging, and muting

Product Description

The Venus Bass Trap achieves a prodigious level of low-frequency sound control at your room boundaries, where low-frequency problems begin, at a price that allows it to fit into most budgets. Venus Bass Traps ship in a 2x4x1 ft. size, but are often cut in half to 2x2 ft., then paired with a 12inch CornerFill.While the Venus Bass Trap provides low frequency sound control and broad bandwidth absorption that's second to none in all rooms, it really shines in larger rooms like gymnasiums, houses of worship, and multipurpose rooms. ... Read more

Product Description

Made from high-grade, studio-quality grey foam. Super dense for efficient sound reduction, and super tough so it won't tear or mutilate. Includes 12 - 2' x 4' foam pieces (96 sq. ft.). ... Read more

Product Description

The MIDI Solutions M8 8-input MIDI Merger is an 8-in 1-out MIDI Merger. All MIDI messages appearing at any of the eight inputs are merged to the output. All MIDI data types are merged, including System Exclusive and MIDI Time Code. A fast merging algorithm insures that MIDI data is processed with minimal delay. ... Read more

Features

• The M8 is MIDI-powered and requires no batteries or power supply to operate
• A MIDI indicator LED lights up when the product is powered and flashes when MIDI data passes through it

Product Description

If your creativity happens in a studio environment with multiple MIDI devices, the UM-550 provides 5x5 near-zero-latency MIDI interface and patcher to make your work faster, easier. 5-in, 5-out interface controls up to 80 channels. Functions as a standalone MIDI patcher without connection to computer. Fast and stable transmission due to Fast Processing Technology. Features convenient MIDI utility functions (merge, MIDI message filter, preview, and cable check). Ability to connect as many as 4 units at once to the computer for a total of 320 channels. 3/4 rackspace. ... Read more

Features

• 5-in/5-out USB MIDI interface to computer (controls up to 80 channels)
• Standalone hardware MIDI patcher without connection to computer
• Quick patching, easy operation, and low latency with HDMR (Hardware Direct MIDI Routing)
• Fast and stable MIDI data transmission realized by FPT (Fast Processing Technology)
• Comfortable patching operation with LED switches on the front panel

Product Description

Deflex Power Pads are a revolutionary new waterproof damping pad specially designed to prevent speaker cone break-up due to standing waves and enclosure resonances.This allows higher sound volumes with a minimum of distortion.They are ideally suitedbehind any midrange to low frequency speaker, including vehicle door and in-wall speaker applications. Deflex Power Pads need to be roughly the same diameter or larger than the speaker cone.Red in color. ... Read more