Product Description

Two Z731 shelves can be mounted on either side of any Z stand (except for Z722, Z722L, Z250, and Z750) and be used as small speaker stands. Rubberized cushions firmly hold equipment in place. The shelves do not require Z720 or Z720L accessory bars. ... Read more

Product Description

Portable lightweight racks, close grained plywood cabinets covered in padded 600-Denier Nylon with thresded rails and zip-out flaps.There are large outside accessory pockets, a heavy-duty shoulder strap, and two padded carrying straps. 14 Inches deep. ... Read more

Product Description

The new US Series is the ultimate in American technology with its roto-molded tuff shell, front and rear lids, recessed heavy-duty twist latches, molded in handles, shock absorbing rubber feet and the recognizable patented deep Roto-X pattern for solid stackability. The unique molded-in unbendable valance and steel threaded rails with self tapping screws make the US Series racks convenient to use and the most durable. ... Read more

Features

• Everyone has a budget to keep in mind
• The SKB Roto Racks are the perfect travel companions for the budget wise audio professional
• Molded out of a solid, impact resistant plastic, the Roto Rack Cases are shaped to be stackable and to protect the gear inside from damage
• These roadworthy cases have a rackable depth of 17 3/4", a front lid and back panel, and a rail only in the front
• The Roto Rackseries of cases provide that crucial piece of mind you need when youâre working without costing you a fortune

Product Description

Measuring 1/8 in. thick, Middle Atlantic's all-steel RRF rack rail is threaded for 10-32 screws. With full-hole spacing, they are sold in pairs and designed for use with 19 1/8 in. wide rough openings. They are finished in a durable black powder coat finish. ... Read more

Product Description

This great 11-gauge steel rack rail is punched and tapped for 10-32 in. screws. It is full hole rack rail with holes tapped at 5/8 in. - 5/8 in. - 1/2 in. Sold in pairs. Finished in a high-quality brushed black anodized finish. ... Read more

Product Description

This revolutionary rack contains everything you need for your rackable gear. A built-in power distribution center provides 5 power sources, 15 amp push to reset circuit breaker, and front panel on/off control with pilot light. In addition, it has surge protection to keep your gear safe against power spikes! The power unit is mounted under the rack rail and does not use up a rack space like other power distribution units. Like other Gator racks, these also have threaded rails and locking covers. The best part is that this unit is put into our roller rack. Thus giving you a rack with wheels, pull out handle, lightweight, super durability and power! This is the Swiss Army knife of Racks. ... Read more

Features

• Gatorâs deluxe rack cases are molded from incredibly durable high-density military grade Polyethylene
• This lightweight yet super strong material insures maximum protection at a weight you can easily handle
• 15 amp push to reset circuit breaker
• The cases have 19.5 inch of rackable depth with front and rear threaded rack rails that are field replaceable

Product Description

The Elite Series of fine audio racks are of knock down construction using the highest grade of fused 3/4" Melamine. They come equipped with 11-gauge steel rack rail and the finest knockdown furniture hardware available, ensuring the customer a solidly constructed and durable unit. ... Read more

Product Description

The MAX-Wall is the perfect solution if you're in a rented space and don't want to, or can't mount anything to your walls. Or if your place needs to serve a variety of acoustical purposes. Or if you're on a budget and have acoustical problems that can't wait. Or if you're the sort who likes to mix things up on the fly. MAX-Wall will keep pace with YOUR busy schedule. Turn ANY room into a temporary performance or mixing space. ... Read more

Features

• Makes a perfect 4'x4' portable vocal booth
• Includes four modular walls, window panel and stands
• Overall NRC = 1.05

Product Description

This great 11-gauge steel rack rail is punched and tapped for 10-32 in. screws. It is full hole rack rail with holes tapped at 5/8 in. - 5/8 in. - 1/2 in. Sold in pairs. Finished in a high-quality brushed black anodized finish. ... Read more

Product Description

Basically a stud with an enlarged bolt. Makes removing and replacing units in your rack easier and quicker. ... Read more

Product Description

SheetBlok is a dense, limp-mass vinyl material that is about 6 dB more effective than a sheet of solid lead at stopping the transmission of sound. 4x30 roll, covers 120 square feet. ... Read more

Features

• 4âx30â roll (120 sq
• ); Color: Black (smooth on one side; has a pebble grain finish on the other) or clear (special order; subject to availability); STC: 27; Thickness: 1/8
• ; Service Temperature: -40° to 180° F; Tensile Strength: 400 psi Tear Strength: 70#/inch; Flammability: Rated UL94 S

Product Description

Strong, water-resistant material with 10mm padding, reinforced with glued and screwed plywood with aluminum profile edgings, and built-in rack rails for mounting your gear. Lids are strengthened with a hardboard inlay and fold back for easy access. Feature strong padded handles, Velcro closings, large zippers, and non-slip patches on base. ... Read more

Features

• Strong, water-resistant Rok Tek material
• .39" padding
• Plywood-reinforced exterior, .59" thick, secured by screws as well as glued
• Large zipper
• Big external pouch for cables

Product Description

A perfect combination of looks and great sound! Pyramids offer tons of versatility, provide virtually seamless installations, supply a bit of extra diffusion due to their 4-sided geometry & give a really cool look to your studio. If you want your place to look upscale & distinctive, you should give Studiofoam Pyramids strong consideration. 12 per box, total coverage 96 sq ft. ... Read more

Features

• Charcoal 2â Studiofoam Pyramids are blended with fabric covered acoustic panels to create a great atmosphere for tracking vocals with a controlled, yet open acoustic character
• 2â Studiofoam Pyramids and vocal booths, a great fit
• The 2â Studiofoam Pyramid acoustic foam panels allow greater installation flexibility to trim around doors and windows (please use an electric carving knife)

Product Description

VT series vent panels are made from 16-gauge perforated steel, and are flanged for extra strength. Black powder coat finish. Available in 1, 2, 3, 4 space panels. ... Read more

Product Description

6U Space Roto Rack ... Read more

Features

• Exterior Dimensions (W x D x H): 22" x 23 3/4" x 13 1/2"

Product Description

Includes holes for both mounting gear and for attaching rails to your home-built cases. ... Read more

Product Description

Caster kit for Middle Atlantic RK Series 19" equipment racks. ... Read more

Product Description

Economical steel flanged blank panels feature a rugged black powder coat finish.Available in 1 through 6 spaces. ... Read more

Features

• Powder coat is a superior finish to baked enamel

Product Description

Middle Atlantic's blank panels are flanged for strength and each model is made from 16-gauge steel. A textured black powder coat finish is used throughout Middle Atlantic's SB Series. ... Read more

Product Description

Punch in/out footswitch for Porta studios 414, 424, and 488. For users of just about any TASCAM multitrack, the RC-30P is a wonderful timesaver. Punching in on recordings by hand means you're not ready to play right away. The RC-30P lets you play straight through. While automated punch-ins available on some recorders are also helpful, most punches can be done with the simple and efficient precision of the RC-30P, saving you time. ... Read more