Product Description

Let CTG help you add a SCSI device to your system. CTG offers a wide variety of molded SCSI terminators for peripherals required to meet active, passive, differential, and Forced Perfect impedance regulations. These are the most common styles of termination used today. CTG offers both latch-clip and thumbscrew termination for each of the major SCSI types including SCSI-1, Fast SCSI (SCSI-2), Ultra SCSI (SCSI-3) and more. An important note to remember when it comes to terminators is that a passive terminator simply draws power from the system interface card to regulate the impedance in the line, while an active terminator uses a voltage regulator to control the flow of data. Active styles are always preferred, and most CTG active terminators come with a standard LED to help monitor the activity in the line. Active negation terminators differ from standard active in that voltage regulation is provided over each individual line, instead of the three lines covered with standard active termination. A differential terminator should be used when connecting a differential SCSI device. The major benefit gained from a differential peripheral is the maximum distance for its link, 25m as opposed to the 6m regulation for standard SCSI products. In case you are trying to increase the distance of your SCSI chain and you don't have differential devices, make sure you use CTG's Forced Perfect terminators. These FPT terminators allow all the length advantages of differential SCSI equipment through your standard SCSI device and are perfect for environments with mismatched equipment and cabling. Before you connect your expensive SCSI equipment, make sure you make the right connection with a terminator from CTG! ... Read more

Features

• For external SCSI-1 end-of-line termination
• Lifetime warranty

Product Description

Ultra SCSI (or SCSI-3), is the latest of the ever-improving SCSI standards, and is the cable of choice for such peripherals as the Iomega Zip Drive. It includes specifications for a single-ended as well as a differential bus style. The single-ended is similar to Fast SCSI-2, except it accommodates addressing up to 32 devices over a 16-bit single cable bus. This new style also increases data throughput up to 20 Mbps in single-ended applications. Single-ended SCSI-3 is limited to 4 devices over 3 meters or 8 devices over 1.5 meters. Differential SCSI refers to a bus configuration using two wires per signal, with the signal being derived by the voltage difference between the two wires. ... Read more

Features

• Lifetime warranty
• 10ft

Product Description

CTG is an industry leader at delivering the highest quality connectivity products and services to you and your customers. Cables to Go cabling solutions are geared to meet the growing demands placed on today's systems and company infrastructures. CTG offers high-quality products at a competitive price. ... Read more

Features

• Add an external MD68 port from an internal SCSI-3 68-pin cable connection
• Lifetime warranty

Features

• Lifetime warranty
• 18in

Features

• Converts a SCSI-1 Centronics 50-pin male to a SCSI-2 Micro-Density 50-pin male
• Lifetime warranty

Product Description

Are you looking for speed, performance and quality for your Sun? Then look no further than Workstation cables from Cables To Go! Each cable is fully molded, built with UL 2919 double-shielded high-impedance twisted pair wire giving you the best possible throughput. These cables are built to meet ANSI specifications, to ensure speed, performance and quality. Ferrite filters are molded in place which contact the shield directly to reduce EMI/RFI interference. While these cables are designed to support the Sun workstation environment, they are compatible with all PC and Mac SCSI environments. Connectors: Micro-Density 68-pin Male to Micro-Density 68-pin Male. Ferrite filters help reduce EMI/RFI noise interference. Constructed of heavy-duty UL 2919 double-shielded high-impedance wire. For Ultra SCSI, SCSI-III, Fast/Wide SCSI-II Single Ended or Differential Applications. Supports Sun, Mac, PC and other SCSI applications. Provides for a longer possible cabling distance (up to 25 meters) by using Low Voltage Differential (LVD) signaling. Get maximum data transfer rates up to 320 MBps. ... Read more

Features

• Premium LVD/SE cable designed to connect SCSI-3 peripherals to a SCSI-3 bus
• Lifetime warranty
• Beige color
• 60ft

Product Description

Be ready for the next high speed SCSI protocol with Ultra320 cables from Cables To Go. Ultra320 SCSI provides the most competitive performance choice for high-traffic workstations, servers, multi-user systems, and storage area networks (SANs). This high-quality cable supports both single-ended and LVD connections. The fully laminated twisted and flat design allows for tighter impedance control, and is designed to maintain single-ended and differential impedance. All Cables To Go SCSI cables adhere to SCSI specifications to ensure maximum performance and data integrity. Connectors: 68-pin Male to 4 x 68-pin Male; one for the SCSI controller card, three for SCSI devices, and one for an optional terminator. Supported Transfer Speed: up to 320Mb/s. Devices Supported: 3. Backwards compatible with Ultra2/Ultra160 applications. Connector Spacing: 0-16-21-25-26in. Ideal for internal hard drives, removable storage devices, and other LVD/SE peripherals. ... Read more

Features

• Ultra2/Ultra160/Ultra320 LVD/SE 3-device SCSI cable
• Lifetime warranty
• 26in

Product Description

Be ready for the next high speed SCSI protocol with Ultra320 cables from Cables To Go. Ultra320 SCSI provides the most competitive performance choice for high-traffic workstations, servers, multi-user systems, and storage area networks (SANs). This high-quality cable supports both single-ended and LVD connections. The fully laminated twisted and flat design allows for tighter impedance control, and is designed to maintain single-ended and differential impedance. All Cables To Go SCSI cables adhere to SCSI specifications to ensure maximum performance and data integrity. Connectors: 68-pin Male to 5 x 68-pin Male; one for the SCSI controller card, four for SCSI devices, and one for an optional terminator. Supported Transfer Speed: up to 320Mb/s. Devices Supported: 4. Backwards compatible with Ultra2/Ultra160 applications. Connector Spacing: 0--16-21-26-31-32in. Ideal for internal hard drives, removable storage devices, and other LVD/SE peripherals. ... Read more

Features

• Ultra2/Ultra160/Ultra320 LVD/SE 4-device SCSI cable
• Lifetime warranty
• 32in

Product Description

Ultra SCSI (or SCSI-3), is the latest of the ever improving SCSI standards, and is the cable of choice for such peripherals as the Iomega Zip Drive. It includes specifications for a single-ended as well as a differential bus style. The single-ended is similar to Fast SCSI-2, except it accommodates addressing up to 32 devices over a 16 bit single cable bus. This new style also increases data through-put up to 20 Mbps in single-ended applications. Single-ended SCSI-3 is limited to 4 devices over 3 meters or 8 devices over 1.5 meters. Differential SCSI refers to a bus configuration using two wires per signal, with the signal being derived by the voltage difference between the two wires. This approach effectively eliminates noise on the SCSI bus and allows bus length to increase up to 25 meters. ... Read more

Features

• Lifetime warranty
• 3ft

Product Description

The Micro DB50 Male to DB25 Male Pro Series SCSI II (fast SCSI) Cable is used to interface any two SCSI I/II devices, such as a scanner and CD-ROM, wherein one has a Micro DB50 female port and the other has a DB25 female port.

Features

• Rated for SCSI II applications.
• Double shielded (braid and foil) to meet SCSI specifications and ensure compliance with FCC requirements reducing EMI/RFI interference.
• Low-capacitance impedance matched 28 AWG stranded tinned copper are individually insulated in polypropylene.
• The Belkin full lifetime warranty.
• 25 or 34 tightly woven conductor pairs ensures that each data line is paired with a ground line to minimize interference ensuring error-free data transmissions.
• State-of-the-art wiring design ensures 100% compatibility.
• Gold plated copper contacts for a clean, clear transmission.
• PVC premold encapsulates individual conductors to eliminate stress.
• Flextec™ PVC rubberized cable jacket is extremely flexible for use in tight areas.
• Aluminum undermold shield helps meet FCC requirements.
• Ground indents provide excellent conductivity and retention with mating connector.

Product Description

With SCSI Adapters from Cables To Go, you can save the time and expense of buying new cables by simply adapting your existing ones to interface with the connector types found on many of the newer model SCSI peripherals. We carry a wide variety of adapters to make the conversion between your older SCSI or fast SCSI cable and the new high density SCSI connectors seamless. With the internal SCSI-3 to SCSI-1 adapter, easily adapt an internal SCSI-3 68-pin ribbon connection to a SCSI-1 IDC 50-pin female connection. This adapter provides high-byte termination which is required for this type of connection. Connectors: Intenal SCSI-3 68-pin female to Internal SCSI-I IDC 50-pin Female. Use: Converts a SCSI-3 68-pin male ribbon connection to a SCSI-1 IDC 50-pin female connection. Provides high-byte termination which is required for this type of connection. ... Read more

Features

• Converts a SCSI-3 68-pin male to a SCSI-1 IDC 50-pin female; with high-byte termination
• Lifetime warranty
• Black color

Product Description

Let CTG help you add a SCSI device to your system. CTG offers a wide variety of molded SCSI terminators for peripherals required to meet customer's needs. An important note to remember when it comes to terminators is that a passive terminator simply draws power from the system interface card to regulate the impedance in the line, while an active terminator uses a voltage regulator to control the flow of data. Active styles are always preferred, and most CTG active terminators come with a standard LED to help monitor the activity in the line. Before you connect your expensive SCSI equipment, make sure you make the right connection with a terminator from CTG! ... Read more

Features

• For terminating an external end-of-line SCSI device with only one interface
• Lifetime warranty
• Beige color

Product Description

The Micro DB68 Male to Micro DB50 Male Pro Series (fast and wide) SCSI III cable is used to interface any two SCSI devices, like a scanner and a CD-ROM, wherein one has a Micro DB68 female port and the other has a Micro DB50 female port.

Features:

• Rated for SCSI III applications.
• Double shielded (braid and foil) to meet SCSI specifications and ensure compliance with FCC requirements reducing EMI/RFI interference.
• Low-capacitance impedance matched 28 AWG stranded tinned copper are individually insulated in polypropylene.
• Thumbscrews enable easy installation.
• Flextec™ PVC rubberized cable jacket is extremely flexible for use in tight areas.
• 25 or 34 tightly woven conductor pairs ensures that each data line is paired with a ground line to minimize interference ensuring error-free data transmissions.
• State-of-the-art wiring design ensures 100% compatibility.
• Gold plated copper contacts for a clean, clear transmission.
• PVC premold encapsulates individual conductors to eliminate stress.
• Aluminum undermold shield helps meet FCC requirements. Ground indents provide excellent conductivity and retention with mating connector.

Product Description

The Micro DB50 Male to Micro DB50 Male Pro Series SCSI II (fast SCSI) Cable is used to interface any two SCSI I/II devices, such as scanners, CD-ROM drives and more, with Micro DB50 female ports.

Features

• Rated for SCSI II applications.
• Double shielded (braid and foil) to meet SCSI specifications and ensure compliance with FCC requirements reducing EMI/RFI interference.
• Low-capacitance impedance matched 28 AWG stranded tinned copper are individually insulated in polypropylene.
• The Belkin full lifetime warranty.
• 25 or 34 tightly woven conductor pairs ensures that each data line is paired with a ground line to minimize interference ensuring error-free data transmissions.
• State-of-the-art wiring design ensures 100% compatibility.
• Gold plated copper contacts for a clean, clear transmission.
• PVC premold encapsulates individual conductors to eliminate stress.
• Flextec™ PVC rubberized cable jacket is extremely flexible for use in tight areas.
• Aluminum undermold shield helps meet FCC requirements.
• Ground indents provide excellent conductivity and retention with mating connector.

Product Description

Are you looking for speed, performance and quality for your Sun? Then look no further than Workstation cables from Cables To Go! Each cable is fully molded, built with UL 2919 double-shielded high-impedance twisted pair wire giving you the best possible throughput. These cables are built to meet ANSI specifications, to ensure speed, performance and quality. Ferrite filters are molded in place which contact the shield directly to reduce EMI/RFI interference. While these cables are designed to support the Sun workstation environment, they are compatible with all PC and Mac SCSI environments. Connectors: Micro-Density 50-pin Male to Centronics 50-pin Male. Ferrite filters help reduce EMI/RFI noise interference. Constructed of heavy-duty UL 2919 double-shielded high-impedance wire. For Standard or Fast SCSI-2 Single-Ended or Differential Applications. Supports Sun, Mac, PC and other SCSI applications. ... Read more

Features

• Premium cable designed to connect a SCSI-1 perpherial to a SCSI-2 bus
• Lifetime warranty
• Beige color
• 2ft

Features

• Lifetime warranty
• 3ft

Product Description

Are you looking for speed, performance and quality for your Sun? Then look no further than Workstation cables from Cables To Go! Each cable is fully molded, built with UL 2919 double-shielded high-impedance twisted pair wire giving you the best possible throughput. These cables are built to meet ANSI specifications, to ensure speed, performance and quality. Ferrite filters are molded in place which contact the shield directly to reduce EMI/RFI interference. While these cables are designed to support the Sun workstation environment, they are compatible with all PC and Mac SCSI environments. Connectors: Micro-Density 68-pin Male to Micro-Density 68-pin Male. Ferrite filters help reduce EMI/RFI noise interference. Constructed of heavy-duty UL 2919 double-shielded high-impedance wire. For Ultra SCSI, SCSI-III, Fast/Wide SCSI-II Single Ended or Differential Applications. Supports Sun, Mac, PC and other SCSI applications. Provides for a longer possible cabling distance (up to 25 meters) by using Low Voltage Differential (LVD) signaling. Get maximum data transfer rates up to 320 MBps. Sun Equivalent Number: 530-2352. ... Read more

Features

• Premium LVD/SE cable designed to connect SCSI-3 peripherals to a SCSI-3 bus
• Lifetime warranty
• Beige color
• 12ft