Product Description

The Radial Loopbone is a powerful effects loop controller for pedal boards that allows the guitar player to insert 2 separate pedal effects chains and remove them when not in use. This is particularly advantageous when using older pedals that tend to add noise and cause loading problems in the signal chain. The Loopbone incorporates a superb post-effects variable-gain power booster that allows straight signal boosting or post loop-1 or loop-2 boost for soloing.To ensure that the natural tone of the instrument is maintained, the Loopbone features Radial's unique Drag Control pickup load correction circuit that allows the guitarist to properly match the impedance load of any pedal board configuration with any guitar for optimum performance. Furthermore, there are no signal degrading op-amps or chips in the signal path, only 100% discrete components and Radial's highly acclaimed Class-A circuit for natural tone and exceptional dynamics.Besides FX-loop switching, load matching, and signal boost, the Loopbone brings even more to your pedal board: a separate "always-on" tuner-out circuit allows on-the-fly tuning without adding noise or load to your instrument signal and, perhaps the most innovative feature of all, Slingshot. Slingshot is Radial's unique remote switching system that allows the Loopbone to simultaneously switch amplifier channels, other amp features, or even another Slingshot-equipped device. ... Read more

Features

• Master control for pedal boards
• Insert and combine 2 separate effects loops
• Built-in variable-gain power booster
• Unique Drag control pickup load correction
• Separate tuner output is always on

Product Description

The DIO provides two channels of exceptional A/D and D/A conversion and proprietary ART tube processing. It is the most unique digital conversion system ever. The DIO provides clean, accurate conversion to 96kHz and will enhance all of your work over a broad range of applications. From hard disk recording to computer-based systems and everything in between, the DIO brings functionality and musicality that no one else can deliver. ... Read more

Features

• 24-bit A/D-D/A conversion
• Switchable sample rates ranging from 44.1 to 96kHz
• Auto sync with outboard equipment from 22kHz to 100kHz

Product Description

The George Lynch Tripler - Route one guitar to three amps. Select or combine any combination of all three. Boost knob ensure max output! ... Read more

Features

• Route one guitar to three amplifiers.
• Select or combine any combination of all three amplifiers.
• LED's show you which amps are on/off.
• BOOST knob allows up to 20dB of clean boost to all three outputs.
• Powers from optional Morley adapter or one 9-volt battery.

Product Description

D/A and A/D converters don't belong inside the world's noisiest environment - your computer! They belong on your desktop or in your rack! If you're using a two channel digital I/O card in your computer, the Flying Cow delivers cutting edge technology and crystal clear audio from 24-bit, delta sigma converters with 128x oversampling. The superior sonic performance will convince you to use the Flying Cow for everything from computer based digital audio to adding unparalleled clarity to your DAT recordings. Shipping weight: 5 lbs. ... Read more

Features

• Standard 1U, half-rack package
• AES/EBU digital I/O (XLR), S/PDIF digital I/O (coaxial), Balanced analog I/O (XLR), Unbalanced analog I/O (1/4")
• A/D sample rate adjustment via front panel
• Indicators for valid incoming digital data, Indicators for current digital format and A/D sample rate
• Remembers parameter settings even after power-off

Reviews (1)

I LOVE IT!
I was very hesitant in getting this unit at first.Why?Because of the name "Flying Cow" and the giant cartoon graphic painted on the top of the unit. Also the "Ren & Stimpy" font on the face of the unit turned me off as well.

This IS the most unprofessional LOOKING peice of equipment in my studio.

I still don't understand what analog to digital converting has to do with Cows, or why they are marketing this in such a cartoonish way, instead of towards professionals.

But, I couldn't find anything else in the price range, and decided to get it.

I am not dissapointed in the unit at all.Very pleased.

It even remembers your settings after the power is removed, and not just turned off at the power switch on the front of the unit, but when the unit is completely unplugged from the AC power.

It has BOTH AES pro, and SPDIF consumer INS and OUTS.

They use connectors that act BOTH as an XLR AND a 1/4 phone jack, your choice.

You can go A to D, and D to A both at the same time. It is two converters in one.

And I have used it to feed directly into the digital CD input of the Soundblaster Live Value card, and I get professional clean digital audio into the computer without needing an expensive audio card.

I used to use a DAT machine in record mode as my Analog to Digital converter, but didn't like having to put the wear on the DAT machine, so I got the FLYING COW.But DAT machines only work in 16 bit, and the FLYING COW is 24 bit, even BETTER than a DAT machine.

Instead of buying an expensive audio card for the computer, a better idea is to get the FLYING COW, and keep all the analog audio outside of the computer and in another room.
... Read more

Product Description

The Big Knob is a simple yet powerful desktop audio control center that lets musicians and engineers get right to the business of making music in four major ways: Level Control, Studio Monitor Selection, Input Source Selection and Talkback & Headphone Control.Precise Level ControlUsing a big, convenient volume knob, Big Knob lets you adjust volume levels with a simple, intuitive knob, not with a mouse and screen. The end result is a higher degree of precision and much quicker level adjustments.Monitor SelectionWhen it comes to mixing, pros know it?s best to get a second, and third, opinion. So Big Knob lets you quickly switch between 3 pairs of studio monitors, or 2 studio monitors and a subwoofer, or studio monitors and a home stereo, or any other combination of powered speakers.Source SelectionOn the input side, Big Knob lets you connect up to 4 stereo input sources at once. This means you can simultaneously connect to your computer/DAW outputs, CD player, cassette deck and even a turntable using the premium onboard RIAA preamp. You can even connect keyboards, guitars, drum machines, samplers - anything you?d like to hear - through your monitors. This makes Big Knob great for comparing your mixes-in-progress to your favorite CDs, for archiving your old LPs, jamming along to your favorite tune, and lots more.Talkback Section & Headphone ControlWith its built-in Talkback mic and spring-loaded activation switches, Big Knob lets you qu... ... Read more

Features

• Tabletop level control / monitor switcher / source selector & talkback box
• Big, convenient volume knob for precise level adjustments
• Switch between 3 sets of studio monitors
• Built-in Talkback microphone for easy communication with musicians
• Dual Headphone outputs with independent headphone mix bus

Product Description

With the flick of your ankle, you can switch from one guitar to the other, with only one amp, and no popping, crackling, or noise at all. Or you can have 2 amps and one guitar, and switch between them at will. ... Read more

Product Description

A/B/Y Selector/Combiner box.Route one signal to two outputs or two inputs to one output. Then choose A, B or A & B combined. LED's show you which signal is active. One 9-volt battery is required for LED indication. ... Read more

Features

• One 9 volt battery is required for LED indication
• Two year warranty

Product Description

This guitar amp cabinet switcher connects between an amp head and 2 cabinets, allowing transition between the 2 cabs while using the same amp head.Uses high-performance, high-cycling, gold contact relays to switch the amp's speaker output without adding color to the tone. To ensure safe, stable amplifier operation and smooth transitions, a timer IC manages a ramped connection overlap. This ensures constant load on the output, a major concern with tube amplifiers. As a further safety measure, the Cab-Bone incorporates a power-off feature called SafeMode which automatically diverts the input signal to output-1 if the power supply is ever disconnected or turned off by mistake.To reduce the 'cable spaghetti' between the the amplifier, speakers, pedal board and back, Cab-Bone is equipped with a Slingshot input and output - Slingshot is Radial's easy to use remote control system that allows any footswitch to toggle switching of remote devices using just regular 14" guitar cables. The Slingshot remote input can be controlled by either momentary or latching contact closure.To add versatility, the Cab-Bone also incorporates a slingshot output that can be used to remotely switch amp channels while switching cabinets. You could for instance connect the slingshot remote output on the Radial Loopbone to toggle the Cab-Bone and go from a 2 x 12" open back to a 4 x12" half-stack. Connecting the Slingshot output to the... ... Read more

Features

• Guitar amp speaker cabinet switcher
• Lets you toggle between 2 speaker cabinets
• Digitally controlled relays with ramping overlap
• Slingshot remote-control switching
• SafeMode failsafe protection

Product Description

Bridges the gap between analog and digital with true 24-bit resolution. It supports sample rates of 96kHz, 88.2kHz, 48kHz, 44.1kHz, and 32kHz. The AD9624"s noise shaping function enhances clarity of low-level material for superior imaging and realism when creating 16-bit masters. Inputs and outputs include AES/EBU (XLR) and S/PDIF (coaxial and TOSLINK). Features a 20-segment output level display and separate headphone front panel output. ... Read more

Features

• 24-bit resoluition
• 96, 88.2, 48, 44.1, and 32kHz sampling rates
• Noise shaping function enhances clarity of low-level material
• Unputs and outputs include AES/EBU (XLR) and S/PDIF (coaxial and TOSLINK)
• Features a 20-segment output level display

Product Description

Postproduction houses and broadcast companies know the secret to noise-free digital conversion: take the conversion out of the computer. Electrically, the inside of a computer is very problematic when it comes to audio production. By using external digital converters, interference and noise created by the computer itself are eliminated.The SUPER DAC 2496 is the perfect external converter for an incredibly low price. Features include: full 24-bit, 96kHz digital-to-analog conversion; optical (TOSlink) S/PDIF, coaxial S/PDIF, and AES/EBU digital formats; plus balanced XLR and unbalanced 1/4" analog outputs. ... Read more

Features

• Features:
• High-performance stereo D/A converter in a standard half-rack package
• D/A converter: 24-bit, 96kHz, 128x oversampling
• Dynamic range: 115dB (A-weighted)
• 16-, 18-, 20-, and 24-bit data widths

Product Description

Optical Converter, S/PDIF to AES/EBU. OPTICAL DATA LINK: AES/EBU in? (coax XLR) and Optical out (TOSLINK) and vice versa, simultaneously.? Two, independent signal paths operate at the same time without selective switching. ... Read more

Product Description

A low-cost solution to extend Optical connections to 500ft. Converts ADAT to Cat-5e and transmits 44.1kHz or 48kHz data. In box has ADAT through and uses 9VDC power; out box is bus powered and has 2-parallel lightpipe outputs. ... Read more

Product Description

The Radial JX2 Switchbone is the ultimate AB-Y guitar amp switcher. It is a creative tool that is designed to allow your guitar to drive and control 2 amplifiers without introducing noise, distortion, clicks or pops. Most importantly, the Switchbone will retain the natural sound and feel of your instrument. At Radial, they call this the Un-Sound. ... Read more

Features

• Exceptional AB-Y switcher
• Noiseless switching between amplifiers
• Drives 2 amplifiers with one instrument
• Class-A circuit for exceptional audio
• Unique Drag Control load correction

Product Description

As part of the growing line of Tonebone foot pedals, Radial introduces the Headbone, a guitar amplifier head switcher that allows the player to transition from, for example, a Mesa Boogie Dual-Rectifier to a Marshall JCM800 while using the same cabinet. The Headbone employs a series of photocells to assure noise-free guitar-to-head switching and a series of high cycle relays that switch between the 2 heads and the speaker. A digital programmable interrupt controller receives commands from the onboard footswitch or the Slingshot remote switching system and controls the transition between equipment to ensure proper amplifier loads are always maintained. ... Read more

Features

• Amp head switcher
• Employs a series of photocells for noise-free switching
• High cycle relays switch between the 2 heads and the speaker
• Digital programmable interrupt controller receives commands from the onboard footswitch or the Slingshot remote switching system
• Controls the transition between equipment to ensure proper amp loads

Product Description

High End stereo 24 Bit converter module for DA and AD conversion. Allows you to adjust and match levels with precision while enjoying great dynamic range. Features S/PDIF coaxial I/O, S/PDIF optical I/O, and AES/EBU I/O, (DI-MOD 24/96 AES/EB). 44.1/48/96 kHz sampling frequency in master mode. Syncs automatically between 32 - 108 kHz in AUTO mode. All digital inputs can be used as sync-reference. Can use different sampling rates for DA and AD in MASTER mode. Stereo-Monitor Out for DA. Optional module for EnVoice, T-COMP and DTC. ... Read more

Features

• High End stereo 24 Bit converter module for DA and AD conversion.
• AKM 24-bit converter
• AD-converter: AK 5393 VS
• DA-converter: AK 4393 VS
• Dynamic range: >113dB(a)

Product Description

The DOD AC270 is a simple A/B box. It provides switching from one source, to 2 destinations, or 2 sources to one destination. The switching is done via a mechanical push/push switch. Source and destination connections are all unbalanced 1/4 in. jacks. ... Read more

Product Description

Save BIG when you buy today! ... Read more

Product Description

The A16 offers 16 balanced analog inputs and outputs, 2 ADAT interfaces, and 2 Z-Link interfaces, as well as word clock I/O. 16 VU meters provide a clear overview of signal levels and 24-bit/96kHz converters ensure excellent sound quality. ... Read more

Features

• 16 balanced analog inputs and outputs
• 2 ADAT interfaces
• 2 Z-Link interfaces
• Word clock I/O
• 24-bit/96kHz converters

Product Description

The Central Station is the ultimate studio-monitoring interface for the modern digital studio. The Central Station features three sets of stereo analog inputs to switch between input sources such as: DAW, mixer, CD/DAT/Tape?player, or keyboards/samplers. Two stereo analog inputs feature TRS balanced and the third stereo input features RCA inputs with trim control for level matching of input signals. In addition, the Central Station will accommodate two digital inputs via S/PDIF or TOSLINK providing D/A conversion up to 24Bit/192kHz. This allows you to monitor DAW and CD/DAT outputs through the same professional quality converter for the most accurate A/B comparison and highest quality monitoring environment. The digital to analog converter offers the highest possible audio quality with over 117dB dynamic range and ultra high quality analog circuitry. The Central Station features three sets of monitor outputs, each with their own set of passive trim controls. The monitoring section also provides MUTE, DIM and MONO switches. In addition, the Central Station includes a set of CUE outputs that can feed headphone amplifiers and a separate stereo MAIN line level output.The Central Station features a PURELY PASSIVE SIGNAL PATH for ultimate sonic performance. The main audio path of the Central Station uses no amplifier stages including op amps or active IC's (integrated circuits) that add noise, color, distortion, and give that "pinched" sound. Distortion produced by op ... ... Read more

Product Description

Optical - Coaxial Converter w/ AC Adaptor. OPTICAL DATA LINK: S/PDIF in (coax RCA) and optical out (toslink) and vice versa, simultaneously.? Two, independent signal paths operate at the same time without selective switching. ... Read more