Product Description

The Radial Loopbone is a powerful effects loop controller for pedal boards that allows the guitar player to insert 2 separate pedal effects chains and remove them when not in use. This is particularly advantageous when using older pedals that tend to add noise and cause loading problems in the signal chain. The Loopbone incorporates a superb post-effects variable-gain power booster that allows straight signal boosting or post loop-1 or loop-2 boost for soloing.To ensure that the natural tone of the instrument is maintained, the Loopbone features Radial's unique Drag Control pickup load correction circuit that allows the guitarist to properly match the impedance load of any pedal board configuration with any guitar for optimum performance. Furthermore, there are no signal degrading op-amps or chips in the signal path, only 100% discrete components and Radial's highly acclaimed Class-A circuit for natural tone and exceptional dynamics.Besides FX-loop switching, load matching, and signal boost, the Loopbone brings even more to your pedal board: a separate "always-on" tuner-out circuit allows on-the-fly tuning without adding noise or load to your instrument signal and, perhaps the most innovative feature of all, Slingshot. Slingshot is Radial's unique remote switching system that allows the Loopbone to simultaneously switch amplifier channels, other amp features, or even another Slingshot-equipped device. ... Read more

Features

• Master control for pedal boards
• Insert and combine 2 separate effects loops
• Built-in variable-gain power booster
• Unique Drag control pickup load correction
• Separate tuner output is always on

Product Description

The George Lynch Tripler - Route one guitar to three amps. Select or combine any combination of all three. Boost knob ensure max output! ... Read more

Features

• Route one guitar to three amplifiers.
• Select or combine any combination of all three amplifiers.
• LED's show you which amps are on/off.
• BOOST knob allows up to 20dB of clean boost to all three outputs.
• Powers from optional Morley adapter or one 9-volt battery.

Product Description

With the flick of your ankle, you can switch from one guitar to the other, with only one amp, and no popping, crackling, or noise at all. Or you can have 2 amps and one guitar, and switch between them at will. ... Read more

Product Description

A/B/Y Selector/Combiner box.Route one signal to two outputs or two inputs to one output. Then choose A, B or A & B combined. LED's show you which signal is active. One 9-volt battery is required for LED indication. ... Read more

Features

• One 9 volt battery is required for LED indication
• Two year warranty

Product Description

The DOD AC270 is a simple A/B box. It provides switching from one source, to 2 destinations, or 2 sources to one destination. The switching is done via a mechanical push/push switch. Source and destination connections are all unbalanced 1/4 in. jacks. ... Read more

Product Description

As part of the growing line of Tonebone foot pedals, Radial introduces the Headbone, a guitar amplifier head switcher that allows the player to transition from, for example, a Mesa Boogie Dual-Rectifier to a Marshall JCM800 while using the same cabinet. The Headbone employs a series of photocells to assure noise-free guitar-to-head switching and a series of high cycle relays that switch between the 2 heads and the speaker. A digital programmable interrupt controller receives commands from the onboard footswitch or the Slingshot remote switching system and controls the transition between equipment to ensure proper amplifier loads are always maintained. ... Read more

Features

• Amp head switcher
• Employs a series of photocells for noise-free switching
• High cycle relays switch between the 2 heads and the speaker
• Digital programmable interrupt controller receives commands from the onboard footswitch or the Slingshot remote switching system
• Controls the transition between equipment to ensure proper amp loads

Product Description

This guitar amp cabinet switcher connects between an amp head and 2 cabinets, allowing transition between the 2 cabs while using the same amp head.Uses high-performance, high-cycling, gold contact relays to switch the amp's speaker output without adding color to the tone. To ensure safe, stable amplifier operation and smooth transitions, a timer IC manages a ramped connection overlap. This ensures constant load on the output, a major concern with tube amplifiers. As a further safety measure, the Cab-Bone incorporates a power-off feature called SafeMode which automatically diverts the input signal to output-1 if the power supply is ever disconnected or turned off by mistake.To reduce the 'cable spaghetti' between the the amplifier, speakers, pedal board and back, Cab-Bone is equipped with a Slingshot input and output - Slingshot is Radial's easy to use remote control system that allows any footswitch to toggle switching of remote devices using just regular 14" guitar cables. The Slingshot remote input can be controlled by either momentary or latching contact closure.To add versatility, the Cab-Bone also incorporates a slingshot output that can be used to remotely switch amp channels while switching cabinets. You could for instance connect the slingshot remote output on the Radial Loopbone to toggle the Cab-Bone and go from a 2 x 12" open back to a 4 x12" half-stack. Connecting the Slingshot output to the... ... Read more

Features

• Guitar amp speaker cabinet switcher
• Lets you toggle between 2 speaker cabinets
• Digitally controlled relays with ramping overlap
• Slingshot remote-control switching
• SafeMode failsafe protection

Product Description

The Radial JX2 Switchbone is the ultimate AB-Y guitar amp switcher. It is a creative tool that is designed to allow your guitar to drive and control 2 amplifiers without introducing noise, distortion, clicks or pops. Most importantly, the Switchbone will retain the natural sound and feel of your instrument. At Radial, they call this the Un-Sound. ... Read more

Features

• Exceptional AB-Y switcher
• Noiseless switching between amplifiers
• Drives 2 amplifiers with one instrument
• Class-A circuit for exceptional audio
• Unique Drag Control load correction

Product Description

A/B-Y switching works two ways. It lets you switch a common source signal (guitar, bass or keyboard) between two amplifiers or amp channels. Or conversely, it lets you switch two source signals (ie, two different guitars) into the same amplifier. A good quality A/B-Y switcher will also provide LEDs or other indicators to show whether A, B or Y routing is in effect. The Y routing combines both the A and B outputs in parallel so that two amplifiers can be driven at once. The CoolSWITCH provides full A/B-Y switching functionality, plus parallel Common in/out jacks. ... Read more

Features

• Dual footswitches
• A and B LEDs illuminate to indicate selected signal routing
• Y routing indicated by illumination of both LEDs
• Dual common jacks permit connection of tuners or other devices
• Powered by 9 V battery (included)