Product Description

The Crown I-Tech Series offers amazing power, light weight and ease of use for touring sound and installed sound applications. Onboard DSP provides a wide array of signal processing, greatly reducing the need for rack components and rack wiring. Onboard DSP features 24-bit, 96 kHz A/D and D/A converters. I-Tech amplifiers are compatible with the IQ? Network and TCP/IQ networking. Digital audio and IQ control signals connect to the amp via a single CobraNet cable in optional CN models, coming soon. Pushbutton DSP presets simplify the setup for various loudspeaker arrays. The Global Power Supply works anywhere in the world, and offers PFC (Power Factor Correction). It is a switching power supply for reduced weight. I-Tech amplifiers have the highest output voltage in the industry (200V peak), which provides clean transient peaks. The 3rd-generation patented Class I (BCA?) circuitry couples power efficiently to the load and allows low AC current drain. A front-panel control screen shows advanced diagnostics and status information. 1250W @ 8 Ohms; 2000W @ 4 Ohms; 1800W @ 2 Ohms 4000W @ 8 Ohms; 3600W @ 4 OhmsFrequency Response (at 1 watt, 20 Hz - 20 kHz): ?0.25dB. 105 dBTotal Harmonic Distortion (THD) at full rated power: < 0.35%.Intermodulation Distortion (IMD) 60 Hz and 7 kHz at 4:1, from full rated output to ?35dB: < 0.35%. 5000. 80 dB. 50 dB.DC Output Offset (shorted input): < ?3 mV.Input Impedance (nominal): 20 kilohms balanced, 10 kilohms... ... Read more

Features

• I-T4000: 1,800W at 2 Ohms; 2,000W at 4 Ohms; 1,250W at 8 Ohms
• Frequency Response (at 1 watt, 20 Hz - 20 kHz): ±0.25dB.
• Total Harmonic Distortion (THD) at full rated power: < 0.35%.
• Input Impedance (nominal):10 kilohms balanced, 5 kilohms unbalanced
• Maximum Input Level: +15 dBu or +22 dBu, depending on input sensitivity.

Product Description

The XLS Series of power amplifiers from Crown represents a new era in affordable, quality power amplification. The line consists of three models in a uniform, rugged chassis, incorporating the best of tried-and-true design principles and innovative features. XLS Series amplifiers are professional stereo power amplifiers engineered to meet demanding audio requirementsÃreliably and within budget. Plus, every XLS Series amplifier is backed by Crownâ°s unequaled 3-Year, No-Fault, Fully Transferable Warranty that covers everything. With over five decades of experience designing and building rock-solid products, Crown is the standard in amp technology. So check out the affordable, Crown XLS Series. ... Read more

Features

• Reliable design incorporates many popular features
• Selectable high-pass filter on each channel enables amplifier to work more efficiently when full bandwidth is not required
• Pair of linear optocoupler clip limiters protects loudspeakers from being overdriven
• Housed in a rugged, all-steel 2U chassis
• Efficient forced-air fan prevents excessive thermal buildup

Product Description

When it comes to power amps, it's all about power, reliability and price. The new Juice Series from Tapco delivers on all front. Big power amp performance at affordable prices. 800 watts @ 4 ohm bridged. ... Read more

Features

• Power rating: 800 watts @ 4 ohm bridged
• Easily switchable mono/stereo/bridged mono operating modes
• Separate Speakon outputs for channel A and channel B
• Third Speakon output for mono bridged applications.
• 30 Hz subsonic filter for low-frequency speaker protection

Product Description

XLS Series amplifiers are professional stereo power amplifiers engineered to meet demanding audio requirements-reliably and within budget. Every XLS Series amplifier is backed by Crown's unequaled Three-Year, No-Fault, Fully Transferable Warranty that covers everything. With over five decades of experience designing and building rock-solid products, Crown is the standard in amplifier technology. Specifications: Power Output: 2-ohm Stereo (per channel): 570W, 4-ohm Stereo (per channel): 400W, 8-ohm Stereo (per channel): 260W, 8-ohm Bridge-Mono: 800W, 4-ohm Bridge-Mono: 1,140W. Sensitivity (for full rated power at 4 ohms): 1.025V RMS. Frequency Response (at 1 watt): 20Hz-20kHz +/-0.75dB. Load Impedance: 2 to 8 ohms Stereo, 8 ohms Bridge-Mono. AC Line Voltages Available (±10%): 120VAC, 60 Hz and 230VAC, 50 Hz. Level Controls: Two front-panel, black rotary level controls, one for each channel. Circuit Breaker: Provides overload protection. Input Connectors: One per channel; back-panel three-pin female XLR input connectors. Output Connectors: One 4-pole Speakon® connector and two pairs of 5-way binding posts; accepts banana plugs, spade lugs or bare wire. Output Signal: Stereo, unbalanced, two-channel. Ventilation: Flow-through ventilation from front to back. Cooling: Internal heat sinks with forced-air cooling. Dimensions (W x H x D): 19" (rack mount) x 3.5" x 14". Net Weight: 25.3 lbs. Shipping Weight: 30.3 lbs. ... Read more

Product Description

15" LF, 15" horn, 500W 2-way full range speaker. Ruggedly built, exceptional sound, most affordably priced. The ProPower Series from Nady Audio delivers a great value in small PA speakers. ... Read more

Features

• 19 1?3" x 14 2?3" x 28"
• Full-range 2-way speaker with 15" woofer 5" x 15" horn
• 91.5dB sensitivity
•  Binding post and 1?4" phone jack connectors
•  Integrated recessed carrying handles

Product Description

When it comes to power amps, it’s all about power, reliability and price. Thankfully, TAPCO’s new Juice Series-the J•800, J•1400 and J•2500-delivers on all fronts. In developing these amps, we devised a rigorous power amp test which was literally un-passable by dozens of name-brand amps on the market today. Our new Juice Series passed the test with flying colors. It’s pure premium power. Features: • Big power amp performance at affordable prices: J•1400 1400W @ 4 Ohms bridged • Easily switchable mono/stereo/bridged mono operating modes • Separate Speakon® outputs for Channel A and Channel B • Third Speakon output for mono bridged applications: also provides bothoutput channels on a single NL4 connector • 30Hz subsonic filter for low-frequency speaker protection • Handles for easy transport and protection of level controls • Defeatable clip limiter • Front-panel signal and overload indication ... Read more

Product Description

The X-series amplifiers are a one-time solution for DJs & Club owners. Built strong with a superior cooling & protection technology, they perform with excellence maintaining a quality signal from your mixer to your speakers, trust the leader in DJ Sound! ... Read more

Features

• State-of-the-art bi-polar output stage technology for the finest sound quality and reliability
• High output power to drive professional loudspeakers without clipping
• Comprehensive protection circuitry: (Short Circuit, DC, Thermal Cut-off, Sub/Ultrasonic Frequency Filters, Turn-on Delay, Main Fuse, Secondary DC Fuses)
• Three modes of operation: stereo, parallel mono and mono bridge
• Ground lift switch for flexibility in installations

Product Description

The RMX Series amplifiers give you clean, dynamic power with the legendary QSC sound quality and reliability that pros depend on. The RMX 1450 delivers 1400 Watts @ 4 ohms bridged mono, 700 Watts per channel @ 2 ohms stereo, 450 Watts per channel @ 4 ohms stereo and 280 Watts per channel @ 8 ohms stereo. ... Read more

Features

• You can never have too much clean amplifier power

Product Description

The PowerLight 2 Series is a high performance line of amplifiers designed exclusively for the touring and live sound professional. Four models range in power from 900 watts to 1850 watts per channel, all in two-rack space chassis that are only 14" deep and 21 lbs.Each of these models are available in two versions: a Base model and an "A" version. Base models are ideal for systems using external signal processing. For those looking for integrated solutions, "A" versions offer internal analog signal processing. Full DSP capabilities may also be added to any model with the addition of the DSP-3 Module.With PowerWave technology, PowerLight 2 amplifiers take your sound to a whole new level. Not only does it give you tighter bass and clean transparent highs, PowerWave also cuts waste heat, boosts reliability and gets rid of unwanted noise and hum. PowerWave is a revolutionary switching power supply technology that provides ample current to the audio power circuitry by charging the supply rails 230,000 times a second through an ultra-low impedance circuit. So unlike amplifiers that use conventional supplies, the audio signal is never starved prematurely and remains crisp and clean.Through continued improvement and innovation, QSC's new PowerLight 2 offer features not found in any other professional audio amplifier. ... Read more

Features

• PowerWave Switching Technology for improved audio performance
• Increased airflow for improved thermal performance
• DataPort for remote computer control or the addition of external DSP modules
• Detented gain controls with 1 dB steps for precise calibration
• User defeatable clip limiters and selectable low-frequency filter (5, 30, or 50 Hz)

Product Description

450 watts @4ohms per channel ... Read more

Features

• Switch Mode Power Supply gives it less weight for the watts
• Sophisticated protection circuitry and five-way fault indicator
• Red LED to indicate audible distortion
• Green signal present LED
• Detented level controls

Product Description

Named the "Best New Power Amp" in 1999 by Music & Sound Retailer magazine, the M-1400 has a proven track record with thousands of satisfied abusers. It delivers 300W per side into 8 ohms, 500W into 4 ohms, 700 into 2 ohms (which it handles with ease), 1000W at 8 ohms bridged, and a full 1400W into 4 ohms bridged. Ultra-low noise and distortion and fast recovery yield sterling performance when pressed. Pro features include 2 2nd-order, 12dB/octave, Bessel low-cut filters to optimize bass output. It also boasts a 3rd-order, 18dB/octave, Bessel electronic subwoofer crossover with 2 selectable frequency points, a constant directivity horn, EQ with variable frequency from 2K to 6kHz and on/off switch, and a limiter with on/off switch. Connectiions include XLR thru outputs, Speakon connectors, and 5-way binding post outputs. Detented gain controls calibrated in dB and volts, signal present and overload LEDs, and channel-status LEDs for easy control and monitoring. Superior T-Design cooling. No problems. Just good clean power. ... Read more

Features

• 1400W @ 4 ohms bridged
• 1000W @ 8 ohms bridged
• 700W + 700W @ 2 ohms stereo
• 500W + 500W @ 4 ohms stereo
• 300W + 300W @ 8 ohms stereo

Product Description

Crown's new CP660 six-channel power amplifier gives you super flexibility and the best watts-to-dollar ratio around. With six independent channels, the CP660 takes the place of three, two-channel amplifiers, yet still fits in a standard two-rack space. Its 75-watt average power output per channel is ideal for a variety of surround-sound uses, as well as many paging, zoning and background music applications. Plus, when you need it, you can easily bridge any pair of channels for double the power. ... Read more

Product Description

This amplifier is lightweight and perfect for beginning students. ... Read more

Features

• 5 Watts output
• Volume control, tone control with treble and bass
• A LED indicator for power on
• Two 0.25-inch jacks for guitar input and headphone output

Product Description

The new RMX Series amplifiers give you clean, dynamic power with QSC's legendary sound quality and reliability that pros depend on. QSC combined their rugged, high-output designs with the latest circuit technology to deliver unmatched performance at a new breakthrough price. RMX amps have balanced XLR and 1/4 in. inputs. Outputs include binding posts and Neutrik Speakon connections. The best warranty promotion in the business has been extended. All PLX, RMX, or PL2 model amplifiers purchased now through December 31, 2005, will receive QSC's 6-Year Full Factory Warranty... FREE! ... Read more

Product Description

Output Power: 400w/ch 8-ohms, 660w/ch 4-ohms, 975w/ch 2-ohms The CE-Series of Crown amplifiers are professional tools designed and built for professional use. Engineered and manufactured by the same teams who built Crown's acclaimed Macro-Tech® and KSeries amps, the CE 2000 has the rugged heart and soul that have characterized Crown's amplifiers for over 30 years.With many of the same controls and features you've come to expect from Crown, CESeries amplifiers feature front-panel detented level controls, useful function indicators, proportional fan-assisted cooling, shortcircuit protection and more.For superior flexibility, Crown CE-Series amplfiers can work with a range of Crown modules which provide true professional features like fixed-point crossover and summed bass output. With a powerful, reliable performance, CE Series amps easily handle real 2-ohm loads and are capable of chest-thumping lows.Plus, your investment in an CE-Series amplifier is backed by Crown's unequaled Three-Year, No-Fault, Fully Transferable Warranty that covers everything. Input Connector, One Neutrik® Combo connector for each channel which features a balanced ¼-inch phone jack and a 3-pin female XLR connector, in parallel with a barrier strip termination. Output Connectors: Neutrik® Speakon® NL4MP and Barrier strip. Construction:Rugged steel chassis is formed into a durable package any stagehand could love. Cooling: Proportional speed fan. ... Read more

Product Description

Features: 85 watts per channel RMS at 8 Ohm Balanced input Stereo/Parallel/Bridge Advanced protection circuitry Fan cooled ... Read more

Product Description

600W per side @ 4 ohms ... Read more

Features

• Proven Reliability
• With over 30 years of building amplifiers for the largest touring companies and venues around the world, you can count on QSCâs reputation for designing the most reliable amps available
• FEATURES
• Compact size--max power in 2 rack spaces

Features

• 200W RMS/CH at 8 ohms
• 300W RMS/CH at 4 ohms
• 600W at 8 ohms bridged
• Three modes of operation - Stereo, Parallel Mono and Mono Bridge
• Active 1/4-inch Balanced / Unbalanced Inputs

Product Description

Built like a finely crafted German Automobile.Strap on your seat-belt and shoulder harness because this amp can break the clean sound barrier.This stereo power amplifier delivers: 380 watts per channel at 8 ohms; 600 watts per channel at 4 ohms; and 850 watts per channel at 2 ohms. ... Read more

Features

• 380 watts per channel at 8 ohms; 600 watts per channel at 4 ohms; and 850 watts per channel at 2 ohms at 1 kHz
• 1,200 watts bridged at 8 ohms; 1,700 watts bridged into 4 ohms at 1 kHz
• State-of-the-art limiters driven by a sophisticated input/output comparator ensure freedom from amplifier clipping
• High-current Neutrik Speakon® output connectors for channels A, B and bridged operation for loss-free connections
• Active-balanced XLR-type input and paralleled XLR-type output connectors provide easy signal routing

Product Description

The last obstacle to owning the Amplifier you've always wanted has been removed.If you've spent any time at all in professional audio, you know the name Crown and what it stands for - incredible performance and sound, the ultimate in reliability under harsh conditions and the best support in the business. You'll find front panel dented level controls, useful function indicators, proportional fan-assisted cooling, short circuit protection and more. And, to make the amplifier more flexible to the way that you work, we've provided a new SST (System Solution Topologies) module which allows you to customize the amplifier with true professional features such as fixed-point crossover cards. The result is an amplifier capable of chest-thumping lows that easily handles real 2 ohm loads and runs longer under difficult conditions than any competitive amp out there. Plus, your investment in a CE amplifier is backed by Crown's unequaled Three Year, No-Fault, Full Warranty that covers everything. ... Read more

Features

• 560W/Ch ot 2 Ohms, 450w/ch at 4 ohms, 275W/Ch at 8-ohm
• Input Connector (standard module): One Neutrik® Combo connector for each channel which features a balanced ¼-inch (6.35-mm) phone jack and a 3-pin female XLR connector, in parallel with a barrier strip termination
• Output Connectors: Neutrik® Speakon® NL4MP (mates with NL4FC) output connector and barrier strip outputs (in parallel with Speakon® connectors)