Product Description

Looking for an amp with power for those larger speakers?The X2 has 200 watts per channel to deliver that heavy, punchy sound.It's got TRS inputs, fan cooling, runs in stereo, parallel or bridged modes and weighs less than 18 lbs. ... Read more

Features

• Advanced Protection Circuitry with Fan Cooling
• Stereo/Parallel/Bridge Mode
• Steel Reinforced Chassis
• Dual Aluminum Extrusion Heatsink with Directly Mounted Output Transistors
• Ground Lift Switch for Hum Elimination

Product Description

The GXA-750 is a powerful amplifier that will ensure solid sound stability with a constant performance. The amplifier will operate at 8, 4 & 2 ohms with mono or bridge modes, enabling a user to utilize it in a variety of ways with different sound systems. ... Read more

Product Description

The X-series amplifiers are a one-time solution for DJs & Club owners. Built strong with a superior cooling & protection technology, they perform with excellence maintaining a quality signal from your mixer to your speakers, trust the leader in DJ Sound! ... Read more

Features

• State-of-the-art bi-polar output stage technology for the finest sound quality and reliability
• High output power to drive professional loudspeakers without clipping
• Comprehensive protection circuitry -(Short Circuit, DC, Thermal Cut-off, Sub/Ultrasonic Frequency Filters, Turn-on Delay, Main Fuse, Secondary DC Fuses)
• Three modes of operation -stereo, parallel mono and mono bridge
• Ground lift switch for flexibility in installations

Product Description

The Mackie Designs M?800 is a dual channel, high output power amplifier that incorporates a number of unique features including FR ?Fast Recovery? design, high continuous current output, and a T-Design constant gradient cooling tunnel for improved cooling efficiency and output device reliability.The M?800 is rated at a continuous output of 150 watts per channel into 8 ohms, 225 watts per channel into 4 ohms and 280 watts into 2 ohms. In bridge mode the M?800 is rated at 450 watts into 8 ohms and 560 watts into 4 ohms. Variable low-cut filters on each channel, with a range from Off to 170Hz, enable tighter bass response and a Constant Directivity Horn EQ improves high-frequency reproduction. The CD Horn EQ is 6 dB/octave and its ?knee? position is sweepable from 2kHz to 6kHz. The built-in limiter helps eliminate clipping. Inputs are balanced/unbalanced 1/4" and XLR, and XLR thru connections. Speaker connections on the M?800 are 1/4" and binding posts for the U.S. version, and Speakon® and binding posts for the international version. An amp mode switch selects stereo, mono, or bridge operation. Fast Recovery circuitry reduces distortion at the edge of clipping and beyond resulting in superior sound. ... Read more

Features

• Detented gain controls calibrated in dB & volts
• Signal present and OL LEDs, Channel Status LEDs
• Easily handles 2-ohm loads all night long
• Limiter with On/Off switch (decreases distortion that may become present when the M-800 is driven at max levels without affecting overall sound levels)
• Superior T-Design cooling

Product Description

CE Series amplifiers are professional tools designed and built for professional use. Engineered and manufactured by the same teams who built the acclaimed Macro-Tech and K Series amps, the CE2000 has the rugged heart and soul that has characterized Crown amplifiers for over 30 years. You'll find front panel detented level controls, useful function indicators, proportional fan-assisted cooling, short circuit protection and more. ... Read more

Features

• Handles 2-ohm loads
• Front-panel detented level controls
• Function indicators, fan-assisted cooling, short-circuit protection
• Works with SST modules that provide extra functions
• Mode select switch for stereo or bridged

Product Description

The XLS Series of power amplifiers from Crown represents a new era in affordable, quality power amplification. The line consists of three models in a uniform, rugged chassis, incorporating the best of tried-andtrue design principles and innovative features. XLS Series amplifiers are professional stereo power amplifiers engineered to meet demanding audio requirementsreliably and within budget. Plus, every XLS Series amplifier is backed by Crowns unequaled Three-Year, No- Fault, Fully-Transferrable Warranty that covers everything. ... Read more

Features

• Selectable high-pass filter on each channel enables amplifier to work more efficiently when full band-width is not required.
• Pair of linear optocoupler clip limiters protects loudspeakers from being overdriven
• Housed in a rugged, all-steel 2U chassis.
• Efficient forced-air fan prevents excessive thermal buildup.
• Electronically balanced XLR inputs and touch-proof binding post outputs.

Product Description

The Rane Model MA 6S Multichannel Amplifier supplies six completely independent amplifier channels in one 3-space rack-mount unit. Each channel delivers 100 watts rms into an eight ohm load, or 150 watts each into a four ohm load. Adjacent pairs of channels (1&2, 3&4, 5&6) operate bridged to provide 300 watts into an eight ohm load.Each channel of the MA 6S includes an input Voltage Controlled Attenuator (VCA). This carefully designed VCA prevents clipping at the output of the amplifier for any load for up to 15 dB of input overdrive. This VCA provides additional headroom to each channel, making the 100 watt ratings effectively much higher, and the results much louder. ... Read more

Features

• All channels of the MA 6S are completely independent
• Each is contained on its own circuit board making it immune to the actions of any other channel
• Power is distributed to each channel from one master high current power supply, designed so that signal may not back-feed from a heavily loaded channel to any other channel
• This makes power supply cross talk between channels inaudible

Product Description

Gemini's X-Series amplifiers are value priced for DJs. Choose just the right amount of power for your speakers. All X-Series amplifiers feature short circuit protection, thermal cut-off, sub-frequency filters. Features Stereo power amps with power-on, signal LED, clip LED and protect LED indicators on front panel, Cooling fan with front-to-rear air flow, Inputs: 1/4" balanced/unbalanced and RCA unbalanced, Outputs: 5-way binding posts, Power protection circuitry, Switchable 110-120V / 220-240V 60Hz/50 Hz AC. Size: 19"w x 3.5"h x 10.75"d. Wt. 21 lbs. ... Read more

Features

• 200 watts per channel stereo @ 8 ohms or 300 watts per channel stereo @ 4 ohms
• 600 watts @ 8 ohms when used as a bridged mono amplifier (e.g. a separate amplifier may be used for each of the two stereo channels)
• May be mounted in a professional audio rack
• Fan cooled mechanism for reliable performance
• Level controls

Product Description

This amplifier is ideal for beginning students. ... Read more

Features

• 15 Watts output
• Volume control, tone control with treble and bass
• A LED indicator for power on
• Two 0.25-inch jacks for guitar input and headphone output

Product Description

This portable amplifier is perfect for beginning students! ... Read more

Features

• 10 Watts output
• Volume control, tone control with treble and bass
• A LED indicator for power on
• Two 0.25-inch jacks for guitar input and headphone output

Product Description

An unquestioned long-term standard, D Seriesamplifiers are found everywhere in the lab, on the road, in public facilities, in the studio and at home. With over 25 years of continual production of the DC-300 amplifier, the D Seriesis an example of Crown's commitment to developing long-term, reliable amplifier technology. The D-45 and D-75A are perfect for moderate power applications such as recording or broadcast studio near-field monitoring, video suite audio monitoring, a recording/broadcast headphone amp or a small paging system. Crown's AB+B circuitry ensures efficient use of output transistors while incorporating protection against shorted, open, mismatched or low-impedance loads. Designed, built and carefully checked to ensure reliable operation with a wide variety of loads, Crown D Seriesamplifiers are convection cooled. Their high reliability is particularly important in reducing maintenance costs. All D Series amplifiers are covered by Crown's comprehensive, transferable, Three Year No-Fault Full Warranty which guarantees that your amp will continue to meet or exceed all original specifications and protects your investment even if it's damaged by accident! Balanced three-pin Neutrik® combination XLR and 1/4-in. phone jackinputs for each channel. Four-terminal barrier block on outputs (two per channel) and stereo headphone jack. Dimensions: 19 in.W X 1.75 in. H, 8.38 in. depth behind mounting surface. Net Weight: 9 lbs. 7 oz. ... Read more

Features

• Signal-to-Noise Ratio (unweighted): 106 dB below full rated power from 20 Hz to 20 kHz.
• Total Harmonic Distortion (THD): Less than 0.001% from 20 Hz to 400 Hz and increasing linearly to 0.05% at 20 kHz delivering rated power into 8 ohms/channel
• Intermodulation Distortion (IMD): (60 Hz and 7 kHz 4:1) Less than 0.05% from 0.01 to 0.25 watt and less than 0.01% from 0.25 watts to rated power into 8 ohms/channel.
• 35 watts per channel into 8 ohms, 45 watts into 4 ohms. FTC Continuous Average Power from 20 Hz to 20 kHz with No More than 0.1% THD:
• Rated for 4 to 16 ohms in Stereo and 8 to 16 ohms in Bridge-Mono. Safe with all types of loads.

Product Description

QSC's RMX 5050 power amplifier represents the state-of-the-art in professional quality performance at an affordable price. Perfectly suited for a wide range of sound reinforcement applications including professional touring, performing musicians, and mobile entertainers, the RMX 5050 is optimized to deliver high levels of sustained power, extraordinary audio performance and road-proven reliability.Like its smaller sibling (the RMX 4050HD), the RMX 5050 features a three-tier, Class H design. The RMX 5050 is extremely efficient at real world power levels. Less AC current is wasted and more goes into producing useful audio power. The RMX 5050 uses the best available component upgrades to increase peak power by 25% over the RMX 4050HD.Like all RMX amps, the RMX 5050 features balanced 1/4" TRS, XLR and barrier strip inputs, binding posts and Neutrik Speakon outputs, front-mounted gain controls, plus signal and clip LED indicators to monitor performance. FEATURESThe new flagship of the RMX line, the RMX 5050 provides extremely high power and represents tremendous valueThe RMX 5050 provides advanced thermal performance, delivering higher continuous power in 2-ohms stereo or 4-ohms bridged applicationsDual mono, high current power supply for increased reliability and performance3RU chassis only 16" deepProfessional quality performance - incorporates road-proven QSC designsHigh-current toroidal transformers for greater two-ohm power and low n... ... Read more

Features

• STEREO MODE, Both Channels Driven
• 8 ohms FTC 20 Hz-20 kHz 0
• 1% THD 1050 Watts
• 4 ohms FTC 20 Hz-20 kHz 0

Product Description

This amplifier is ideal for beginning students or jam sessions. ... Read more

Features

• 20 Watts output
• Volume control, tone control with treble and bass
• A LED indicator for power on
• Two 0.25-inch jacks for guitar input and headphone output

Product Description

The Rane HC 4 is one of the most indispensable products in todays audio industry. Featuring four stereo headphone amplifiers, the HC 4 performs a number of necessary tasks, not all of which are headphone related. The HC 6 provides Master stereo Inputs which can be used to drive any or all of the 4 stereo headphone amplifiers. A Mono switch is provided on the front panel to drive both channels of all 4 amplifiers from a common mono source. Four individual unbalanced stereo Inputs are available to drive any individual amplifier from a separate stereo source. These Inputs can be converted to mono balanced Inputs through internal jumpers if required. Outputs for all six channels are provided on the front panel and on the rear panel so that headphones may be connected on either side based on the requirements of a given installation. Two pairs of headphones may be driven from each channel, one pair connected to the front and one to the rear. The HC 4 is capable of delivering up to 450 milliwatts into headphones with rated impedances between 32-600 ohms. The precise amount of power depends on the exact impedance of the headphone in use and the number of headphones connected to the unit. Under most conditions, the HC 6 produces sound pressure levels in excess of 120 dB. This level is above the threshold of pain and is suitable for most listeners. ... Read more

Features

• Individual Level Controls and Overload Indicators
• Drives 32-600 ohm Headphones
• Master Balanced/Unbalanced ¼" TRS Stereo Inputs
• Rackmountable

Product Description

The X-series amplifiers are a one-time solution for DJs & Club owners. Built strong with a superior cooling & protection technology, they perform with excellence maintaining a quality signal from your mixer to your speakers, trust the leader in DJ Sound! ... Read more

Features

• State-of-the-art bi-polar output stage technology for the finest sound quality and reliability
• High output power to drive professional loudspeakers without clipping
• Comprehensive protection circuitry: (Short Circuit, DC, Thermal Cut-off, Sub/Ultrasonic Frequency Filters, Turn-on Delay, Main Fuse, Secondary DC Fuses)
• Three modes of operation: stereo, parallel mono and mono bridge
• Ground lift switch for flexibility in installations

Product Description

The GXA-1600 is a powerful amplifier that will ensure solid sound stability with a constant performance.This amplifier will operate at 8, 4 & 2 ohms with mono or bridge modes, enabling a user to utilize it in a variety of ways with different sound systems. ... Read more

Product Description

The Crown I-Tech Series offers amazing power, light weight and ease of use for touring sound and installed sound applications. Onboard DSP provides a wide array of signal processing, greatly reducing the need for rack components and rack wiring. Onboard DSP features 24-bit, 96 kHz A/D and D/A converters. I-Tech amplifiers are compatible with the IQ? Network and TCP/IQ networking. Digital audio and IQ control signals connect to the amp via a single CobraNet cable in optional CN models, coming soon. Pushbutton DSP presets simplify the setup for various loudspeaker arrays. The Global Power Supply works anywhere in the world, and offers PFC (Power Factor Correction). It is a switching power supply for reduced weight. I-Tech amplifiers have the highest output voltage in the industry (200V peak), which provides clean transient peaks. The 3rd-generation patented Class I (BCA?) circuitry couples power efficiently to the load and allows low AC current drain. A front-panel control screen shows advanced diagnostics and status information. 1500W @ 8 Ohms; 3000W @ 4 Ohms; 2500W @ 2 Ohms 6000W @ 8 Ohms; 5000W @ 4 OhmsFrequency Response (at 1 watt, 20 Hz - 20 kHz): ?0.25dB. 105 dBTotal Harmonic Distortion (THD) at full rated power: < 0.35%.Intermodulation Distortion (IMD) 60 Hz and 7 kHz at 4:1, from full rated output to ?35dB: < 0.35%. 5000. 80 dB. 50 dB.DC Output Offset (shorted input): < ?3 mV.Input Impedance (nominal): 20 kilohms balanced, 10 kilohms... ... Read more

Features

• Power Output
• 1500W Stereo 8 Ohms
• 3000W Stereo 4 Ohms
• 2500W Stereo 2 Ohms
• 6000W Mono 8 Ohms

Product Description

When it comes to power amps, its all about power, reliability and price. Thankfully, TAPCOs new Juice Series delivers on all fronts.2500 watts of pure premium power. ... Read more

Features

• Power rating: 2500 watts @ 4 ohm bridged
• Easily switchable mono/stereo/bridged mono operating modes
• Separate Speakon outputs for channel A and channel B
• Third Speakon output for mono bridged applications
• 30 Hz subsonic filter for low-frequency speaker protection

Product Description

This is the choice for new DJs, small setups & monitors systems, 2 large blue backlit VU meters provide precise control & monitoring. ... Read more

Product Description

More than just another amplifier, the M800 gives you complete speaker contro. This 800W workhorse include low cut filters, limiter circuit, CD horn EQ and subwoofer crossover - all included for the price of a competitive standalone power amplifier. ... Read more

Features

• 800 watts @ 4 ohms bridged
• 550 watts @ 8 ohms bridged
• 400 + 400 watts @ 2 ohms stereo, 275 + 275 watts @ 4 ohms stereo, and 140 + 140 watts @ 8 ohms stereo
• Fast Recovery circuitry reduces distortion at the edge of clipping and beyond
• Two 2nd order, 12dB/octave, Bessel low-cut filters with variable frequency from Off to 170Hz help optimize bass output of your sound system