Amazon.com Product Description

Sharpen your chops without shelling out hundreds of dollars for a full-fledged amplifier with this Yamaha RGA-10 practice guitar amp. Ideal for both new players and practicing professionals, the compact 7-watt amp carries easily, so you can toss it into the trunk for vacations or haul it into the basement without needing a forklift. Meanwhile, its 4-inch speaker--while not as robust as the speakers in larger amps--still pumps out solid sound. The device includes volume, treble, bass, and midrange controls, in addition to a headphone jack that lets you practice in private without disturbing others. In addition, the exterior is durable and attractive, with a faux leather material covering the particleboard construction.

The RGA-10 is a factory reconditioned product, meaning it was returned to the manufacturer and restored to like-new condition. ... Read more

Features

• Factory reconditioned to like-new condition; includes headphone jack
• 7-watt practice amplifier for beginning guitarists or practicing professionals
• Separate volume, treble, bass, and midrange controls
• 4-inch speaker delivers solid, full-bodied sound
• Faux leather vinyl exterior covers particleboard housing

Reviews (3)

BIg sound for a small amp
I'll admit, I had a few doubts about this amp, being factory reconditioned and only a 4" speaker, but I was blown away when I plugged my Samick strat-clone into it.The tone really slices right through, loud and clear.Pretty well rounded, it provides a reasonable semblance of 80's Metallica with the drive on, the treble cranked, and the bass choked off.Put the bass and treble somewhere toward the middle for a nice full-bodied rough bluesy sound a'la ZZ Top.You could even dial up something like the EVH "brown sound!"

Can't beat it for the price!
Amazon was clearing these out for less than $30, so I couldn't possibly resist! Amazon calls this a 7-watt amp. Another reviewer said it was 10 watts, but that seemed unlikely since the back panel shows that it consumes 10 watts of electricity. And, disappointingly, there was no user's manual included to look up the specs in. So I put a meter across the speaker terminals and saw about 5.7 volts AC into 4 ohms. That works out to just over 8 watts, which makes sense because the speaker is rated to handle 8W. In any case it's plenty loud to fill a room and wake up your housemates.

With a mere 4" speaker you are not going to get "Gods of Thunder" lows, but it's a lot easier to tote around than my larger amp when the car is full of other stuff. Hey, it's a practice amp, not a concert amp! The product description says it has a midrange control, which it doesn't, just volume, treble and bass, plus a drive switch for that "dirty" sound that blues and hard rock require. It has a headphone jack but no CD player input for playalong.

Construction is similar to that of larger amps, wood (particle board) cabinet covered with leather-look vinyl, with plastic corners and rubber feet, and a professional look and feel. The cabinet is open-backed for storage of power cord and guitar cable. The amp has a steel chassis and a heavy-duty power cord with three-prong plug. If you're ever stuck somewhere with nothing to plug your guitar into, you'll wish you had this.

not bad for the money
i tried 1 of these at the local guitar store they are 10 watt not 7 thats why its called rga 10 duh and it says 10 watt on the amp also they dont list its a 2 channel amp with distortion so this amps much better than they list its loud for a 10 watt amp and the distortion sounds nice not real heavy but no hums or hisses and plenty heavy enough for acdc guns n roses or black sabbath covers if u need more gain u can buy a pedal for the price this amps a steal ... Read more

Product Description

This compact rechargeable PA amplifier/ mixer/ speaker operates from either it's built in rechargeable powerful lead acid battery (similar to what computer UPS "uninterruptible power supply") systems use or plugged directly into a 110 volt standard AC power outlet with the included AC adapter/charger. The high quality unit has an multiple jacks for one or two microphone systems using 1/4" microphone plugs, headphones, an external speaker that would be powered by the 15 watt amplifier, a left/ right audio input (for a CD player or Cassette or similar). Volume controls for MASTER, MIC 1 and MIC 2 are available along with triple tone shape controls: BASS, MIDRANGE and TREBLE. An ON/ OFF switch as well as a 440 Hz switch are also on the unit. The unit comes with both a built in carrying handle and a shoulder strap. Output Power: 25W at the maximum; Frequency Response: 50 - 15000 Hz. ... Read more

Features

• 25 Watts public address system
• compact size and light weight
• sleek and stylish design
• 90 days money back guarantee and 1 year limited warranty

Product Description

12" LF, 15" horn, 300W 2-way full range speaker. Ruggedly built, exceptional sound, most affordably priced. The ProPower Series from Nady Audio delivers a great value in small PA speakers. ... Read more

Features

• Integrated recessed carrying handles
• 17" x 11 3?4" x 22 3?4"
• Full-range 2-way speaker with 12" woofer 5" x 15" horn
• 91.5dB sensitivity
• Binding post and 1?4" phone jack connectors

Product Description

Ideal for paging tours classroom day-care and crowd communicationsBuilt-in 12v 2.7 amp rechargeable gel cell battery with up to 8 hour play lifeBattery recharges completely in 4 hrs.Wired cardioid electret condenser mic operates for 32 hrs. with 9v batteryLine-out jack to send audio signal to an external amp7 W x 6 3/8 H x 11 1/5 D 6.5 lbs.Includes microphone battery recharger and shoulder strapShipping package dimensions: 8.5x11.5x14 (len x wid x dep) ... Read more

Features

• Ideal for paging, tours, classroom, day-care and crowd communications
• Built-in 12v, 2.7 amp rechargeable gel cell battery with up to 8 hour play life
• Battery recharges completely in 4 hrs.
• Wired, cardioid, electret-condenser mic operates for 32 hrs. with 9v battery
• Large doze button

Product Description

Features: Sound Reinforcement Amplifier 80 Watts Output THD Better Than 0.05% Controls Volume/Balance of Up To 4 Mikes Controls Vol./Balance of Phono/CD/Aux Master Output Level Control Rotary Feedback Filter Lighted VU Meter ... Read more

Product Description

Power output: (True Value) 150W + 150W @ 4 Ohms; THD: +- 3(1KHz); Frequency Response: 20Hz- 20KHz; S/ N Ratio: 80dB; Microphone Input Sensitivity: 10mV; Input Sensitivity: 120mV; Record Output: 1V; Subsidiary Output:1V; Volume: 0-10dB. ... Read more

Features

• Dual Channel professional Karaoke Mixing Amplifier
• 4 Segments echo tuner for each input
• 4 Segments tuning for Master Volume control
• Offers professional features for flexibility, expandability, quality sound, and ease of use
• 90 days money back guarantee and 1 year limited warranty

Product Description

Six input mixer: 4 mic/line and 2 mono/stereo250 watts (75 watts per channel) stereo with digital reverbStereo or main/monitor operation Voice Input PriorityOperates on AC or DC powerIncludes two P-51 microphones with mic clips cables and carrying pouchesTotal weight: 70 lbs. Shipping package dimensions: 13x26.5x33.5 (len x wid x dep) ... Read more

Features

• Six input mixer: 4 mic/line and 2 mono/stereo
• 250 watts (75 watts per channel) stereo, with digital reverb
• Stereo or main/monitor operation, voice input priority
• Includes two P-51 microphones with mic clips, cables and carrying pouches
• Large doze button

Product Description

This stereo input, four output amplifier drives headphones of any impedance. Used in broadcast, installed sound, and recording applications. High voltage technology provides 6dB volume increase over most competing units. Compact half rack chassis permits 8 channels in one rack space. Features• Individual volume controls for each output, master input volume.• Stereo or mono operation, balanced or unbalanced input.• Pass Thru jacks permit daisy-chaining of multiple units.SpecificationsInput Type: Bridging, Balanced or UnbalancedMaximum Input Level: +18dBuMaximum Output Level: +25dBm, 600 ohm load, >10V rms, 200 ohm loadInput Impedance: 20 kohms balanced, 10 kohms unbalancedOutput Impedance: 100 ohmsFrequency Response: 20 Hz to 20 kHz, +0,-1dBTHD + Noise:0.01% (1kHz, 0dBu, 600 ohms)0.02% (1kHz, +24dBm, 600 ohms)Signal to Noise Ratio: 95 dBMaximum Gain: 20 dBInput: 1/4" TRS jacksOutput: 1/4" TRS jacksPower In: 7-pin DINSize (H x W x D): 1.75" x 8.5" x 6.5" (4.445 x 21.59 x 15.875 cm), 1/2 rackShipping Weight: 4.5 lbs.Power Requirements: 115V nominal, 95 to 130 VAC, 50 to 60 Hz, 10 Watts230V nominal, 165 to 255 VAC, 50 Hz, 10 Watts ... Read more

Product Description

Features: FS CD Amp to connect your CD player to the Final Scratch amp Two FS Discs containing 22 minutes of FS time-code Use a CD player as a controller to manipulate audio files on your computer Use your favorite CD functions like scratching, seamless loop and hot start Works with FS version 1.0 and 1.1 Add to any standard DJ set-up (mixer and 2 CD players) ... Read more

Product Description

Specifications: Power Required AC110V/60Hz; Output 160W+160W (RMS 4 ohms); THD: <0.1% (1KHz,100W); Signal/ Noise Percentage: >90dB; Frequency Range: 20-25kHz +-3dB; Microphone input sensitivity: 0<15mV. ... Read more

Features

• 4-Channel Karaoke Mixing Amplifier with individual Bass/Mid-range/Treble Volume Contro
• Individual volume control and individual echo depth control
• Built-in 12-band Equalizer and cooling fan
• 4 inputs selection and master volume control
• 90 days money back guarantee and 1 year warranty

Product Description

The world has seen many good amplifiers, but few achieve greatness. What sets these elite few apart from all the others? The answer is simple: A careful synthesis of unrivaled sonic performance combined with rock-solid dependability.While the definition of a great amplifier may be simple, delivering on those requirements is not. This is what has always set Crown amplifiers apart from the others: Crown delivers. From the slightest nuances in the tremolo of a flute to the chest pounding bass of a rock ânâ roll kick drum to the harmonic rich vocals of a jazz singer, Crown delivers. Crown amplifiers are renowned for their ability to accurately amplify anything audioâwith unmatched power and accuracyânight after night without fail. For decades, the formula for creating great amplifiers has been the same at Crown: An insightful combination of genetics, breakthrough technologies, craftsmanship, and passion. This formula, proven over and over, has produced a lineage of great amplifiers: DC-300, PSA-2, Micro-Tech®, Macro-Tech®, Studio Referenceâ¢, K, and CTs: Each amplifier great in its time, and each raising the standard for high performance. Once again, this formula for greatness has delivered on its promise: I-Tech, the worldâs next great amplifier, and the pinnacle of Crownâs 50-year history of innovation. The following pages convey with words and pictures the essence of I-Tech and why it is destined to be the greatest amplifier ever. ... Read more

Features

• Power Output
• 2100W Stereo 8 Ohms
• 4000W Stereo 4 Ohms
• 3500W Stereo 2 Ohms
• 8000W Mono 8 Ohms

Reviews (1)

I -Tech8000it is a DynamicPerformance Amplifier


A M A Z I N G D U R A B L E ... Read more

Product Description

The Macro-Tech and Maro-Tech 02 Series - high technology amplifiers designed specifically for professional sound reinforcement. MA Series amps provide enormous power in a low-profile design. All Macro-Tech Series amplifiers features PIP (Programmable Input Processor) technology, IOC (Input/Output Comparator) circuitry, Output Device Emulation Protection Circuitry (ODEP) and a Three-year, No-Fault, fully transferable Warranty. Stereo Power: 675 W-2 ohms/325 W-4ohms/310 W-8 ohms Mono Power: 1300 W-4ohms ... Read more

Features

• Power Output: 2 ohm Dual (per ch.)-585W; 4 ohm Dual (per ch.)-450W; 8 ohm Dual (per ch.)-295W; 4 ohm Bridge Mono-1130W; 8 ohm Bridge Mono-895W
• Input Connector: Two balanced 1/4" phone jacks and two balanced 3-pin female XLR connectors
• Output Connectors: Two sets of color-coded 5-way binding posts (for banana plugs, spade lugs or bare wire)
• Standard 19" Rack Mounting

Product Description

The Mackie M?1400/M?1400i is a dual channel, "Fast recovery" high output power amplifier that incorporates a number of unique features. Variable low-cut filters on each channel, with a range from off to 170Hz for tighter bass response. A sweepable 2kHz to 6kHz 6db/octave CD Horn EQ. The built-in limiter is channel independent and helps eliminate clipping. Inputs are balanced/unbalanced 1/4" and XLR, and XLR thru connectors allow the full-range signal to be routed to another M?1400/M?1400i. To effectively deal with clipping, an amplifier must be able to recover almost instantaneously. That is the definition of ?Fast Recovery?. Rather than using negative feedback to help control clipping distortion, the M?1400/M?1400i employs a very sparse amount of negative feedback. In addition, a transistor senses when the Baker Clamp is active and activates the internal limiting circuits. This results in no latching, instant recovery from overdriving the amp, and a superior sound.The M?1400/1400i uses a unique T-Design constant-gradient cooling tunnel that draws air in through the front of the amplifier and forces it out through the amplifier's sides. This allows for reduced heat build up and cooler transistor operation.The amplifier has a subwoofer mode that allows you to turn on the built-in subwoofer crossover. When activated, the signals appearing at the left and right inputs are summed, directed to a low-pass filter (63Hz or 125Hz), and routed to both output stages. ... Read more

Features

• 300 watts per channel @ 8 ohms stereo, 500/ch@ 4 ohms, 700/ch@2 ohms, 1400 watts @ 4 ohms bridged
• Ultra-low-noise/ low-distortion design
• Limiter with On/Off switch (decreases distortion that may become present when the M?1400/1400i is driven at max levels without affecting overall sound levels)
• 1/4" jacks and 5-way binding post outputs for speaker connections, XLR thru outputs
• Detented gain controls calibrated in dB & volts, with channel status and signal LEDs

Product Description

Crown's new CP660 six-channel power amplifier gives you super flexibility and the best watts-to-dollar ratio around. With six independent channels, the CP660 takes the place of three, two-channel amplifiers, yet still fits in a standard two-rack space. Its 75-watt average power output per channel is ideal for a variety of surround-sound uses, as well as many paging, zoning and background music applications. Plus, when you need it, you can easily bridge any pair of channels for double the power. ... Read more

Product Description

Here's your Pro amp.Stable down to 2 ohms.Protection circuitry, power, dependability. ... Read more

Features

• Advanced Protection Circuitry with 2 Speed Dual Fan Cooling
• Stereo/Parallel/Bridge Mode
• Steel Reinforced Chassis
• Dual Aluminum Extrusion Heatsink
• Ground Lift Switch for Hum Elimination

Product Description

The XLS Series of power amplifiers from Crown represents a new era in affordable, quality power amplification. The line consists of three models in a uniform, rugged 2U chassis, incorporating the best of tried-and-true design principles and innovative features.Now with dual Speakon connectors.Power Rating:840W 2-ohm Stereo (per channel); 600W 4-ohm Stereo (per channel); 370W 8-ohm Stereo (per channel); 1,200W 8-ohm Bridge-MonoXLS Series amplifiers are professional stereo power amplifiers engineered to meet demanding audio requirements - reliably and within budget. Every XLS Series amplifi er is backed by Crown?s unequaled Three-Year, No-Fault, Fully Transferable Warranty that covers everything. With over five decades of experience designing and building rock-solid products, Crown is the standard in amplifier technology. FeaturesReliable design incorporates many popular features.Housed in a rugged, all-steel 2U chassis.Efficient forced-air fan prevents excessive thermal buildup.Electronically balanced XLR inputs; touchproof binding post and Speakon outputs.Precision detented level controls, power switch, and four LEDs, which indicate clip for each channel, power and fault conditions.Three-Year, No-Fault, Fully-Transferable Warranty completely protects your investment and guarantees its specifications. SpecificationsSensitivity(volts RMS) for full rated power at 4 ohms: XLS-602: 1.260V Frequency Response... ... Read more

Features

• 2 Channel
• Power: 370W/8 ohms; 600W/4 ohms, 840W/2 ohms
• Dimensions (W x H x D): 19" x 3.5" x 14", Rackmountable
• Input Connectors: One per channel; back-panel three-pin XLR
• Output Connectors: One 4-pole Speakon connector and one pair of back-panel, 5-way binding posts per channel; accepts banana plugs, spade lugs or bare wire

Product Description

QUESTION: Did you know that the United States Government uses the SoundTech PS802 Power Amp inside U.S. Tanks & Flight Simulators? Well, the SoundTech PS802 is a digital switching power amp that delivers a booming 800 watts of power in a scant 1 space 15 1/2 lb rack-mount package!! Amazing! It is a heavyweight performer in a super lightweight package. The PS802 is ideally suited for DJ, KJ and live sound applications. It's size, weight and power have made the PS802 the most popular amplifier in the SoundTech line as well as providing the U.S. Government the durability and dependability they ... Read more

Product Description

The M1400i features more power output, more watts per dollar, more solid reliability, and more features than comparably-priced models. Features XLR as well as 1/4" input jacks, constant-gradient T-design cooling for enhanced reliability, clipping eliminator and built-in low-cut filter and subsonic stabilizer. Applications: MI/Performance, touring sound systems, installed sound, DJ, bass rigs, front end and monitor power. 500 watts X 2 at 2 ohms, 1400 watts bridged mono. ... Read more

Product Description

Crown's first touring workhorse, the Micro-Tech Series, delivers industry standard performance and reliability. Able to drive low-impedance loads with ease, Micro-Tech amplifiers feature three separate power supplies for exceptional reliability and impressive power ratings. Our patented ODEP circuitry keeps the amplifier working long after others would quit. Grounded bridge circuitry doubles the available voltage without placing output transistors in stressful configurations like other more conventional amplifiers. The unique forced-air cooling system makes certain heat is dissipated quickly and evenly. As a result, you get maximum performance without the threat of damage to the amplifier or other system components. Amplifier Accessories: Accepts MT-XLR and MT-BB input modules. Signal-to-Noise:(A-weighted) Better than 105 dB below full rated power into 8 ohms with 26 dB gain. (Unweighted) Better than 100 dB below full rated power. Input Impedance: Nominally 20 K ohms balanced and 10 K ohms unbalanced. Controls: Enable, channel 1 and 2 level controls, stereo/mono switch (Stereo, Bridge-Mono, Parallel-Mono), ground lift switch, three-position input sensitivity switch (0.775 V or 1.4 V for full output or a 26 dB voltage gain). Connectors: Inputs: Balanced 1/4-in. phone jack for each channel. Output: A pair of color-coded binding posts for each channel. Dimensions: 19 in. (48.3 cm) standard rack mount width, 3.5 in. (8.9 cm) height, 16 in. (40.6 cm) depth behind mountin ... Read more

Features

• Crown's Grounded Bridge? design delivers large voltage swings without using easily stressed output-transistor configurations like conventional amplifiers. The results are lower distortion and superior reliability.
• High damping factor provides superior motion control over low-frequency drivers for clean, accurate low end.
• Full protection against shorted outputs, open circuits, DC, mismatched loads, general overheating, high-frequency overloads and internal faults.
• Ground lift switch to isolate chassis and phone jack audio grounds.
• Internal three-position input sensitivity switch provides settings of 0.775 and 1.4 volts for standard 1 kHz power, and 26 dB voltage gain.

Product Description

Output Power: 400w/ch 8-ohms, 660w/ch 4-ohms, 975w/ch 2-ohms The CE-Series of Crown amplifiers are professional tools designed and built for professional use. Engineered and manufactured by the same teams who built Crown's acclaimed Macro-Tech® and KSeries amps, the CE 2000 has the rugged heart and soul that have characterized Crown's amplifiers for over 30 years.With many of the same controls and features you've come to expect from Crown, CESeries amplifiers feature front-panel detented level controls, useful function indicators, proportional fan-assisted cooling, shortcircuit protection and more.For superior flexibility, Crown CE-Series amplfiers can work with a range of Crown modules which provide true professional features like fixed-point crossover and summed bass output. With a powerful, reliable performance, CE Series amps easily handle real 2-ohm loads and are capable of chest-thumping lows.Plus, your investment in an CE-Series amplifier is backed by Crown's unequaled Three-Year, No-Fault, Fully Transferable Warranty that covers everything. Input Connector, One Neutrik® Combo connector for each channel which features a balanced ¼-inch phone jack and a 3-pin female XLR connector, in parallel with a barrier strip termination. Output Connectors:Neutrik® Speakon® NL4MP and Binding Post outputs. Construction:Rugged steel chassis is formed into a durable package any stagehand could love. Cooling: Proportional speed fan. ... Read more