Product Description

Along with having an ergonomic handle for comfort, a knurled knob for easy head changes, and a non-slip magnetized head, the Torque Key's handle can be pre-set to release at a specified tension, ensuring even tuning at each lug.Evans has quickly become known as the Drum Key company, offering a diverse selection of models with unique features, that are each guaranteed for the life of the product. Each key has it's own unique character and was designed to be a practical solution for a common problem. ... Read more

Features

• The Torque Key`s handle can be set to release at a pre-set tension, ensuring evening tuning
• Get the right sound quickly!

Reviews (1)

Great tuning tool - essential for good sound
I generally use the Rhythm Tech Memo Key (ASIN B0002E2EOE) to tune my heads, but this one is as good and has a feature I like more than the Rhythm Tech model - this tuning key clicks and disengages when the dialed-in torque is attained whereas the Rhythm Tech model requires you to reset a lever.

It is simple to use.All you do is hand tighten your lugs, set the dial on the key to an initial setting, then go around your drum in the standard opposing tightening pattern.Test, and increase the dial setting until you get the sound you want. Once you do achieve the sound I strongly recommend that you write the settings down so you can quickly dial in your preferred tuning the next time you tune your drums or change heads.

A few things to consider: tuning involves more than just the batter side heads, which is especially true in the case of snare drums.Unless you are seeking a flat sound, do not tune the resonant heads to the same torque as the batter side heads, else the heads will cancel each other out because they will be vibrating at the same frequency.Also, make sure your lugs are lightly oiled so that each has uniform resistance or the torque settings will be inaccurate. Finally, if you cannot get the sound you are looking for between setting increments (i.e., between dial setting #3 and #4), use a standard key and try one eigth turn increments.

Regardless of whether you play as a hobby or professionally, this key is an amazing tool that will allow you to quickly and easily change the dynamics of your drums. ... Read more

Product Description

The essentials to get you through the gig. Drumhead repair patch, snare strings, felts, cymbal stand sleeves and washers. ... Read more

Product Description

Flanged base tall cymbal sleeve. 8mm. Flanged base for extended-length cymbal tilters. For cymbal stands with a longer threaded shaft. 4-pack. ... Read more

Product Description

The Magnetic Head Drum Key is drop-forged for extreme durability and is ergonomically designed for comfort. It includes a knurled knob for quick head-changes and it's magnetic head prevents it from slipping while tuning and rattling during play.Evans has quickly become known as the Drum Key company, offering a diverse selection of models with unique features, that are each guaranteed for the life of the product. Each key has it's own unique character and was designed to be a practical solution for a common problem. ... Read more

Features

• Knurled knob
• Magnetic head
• Rattle-free

Product Description

1-1/2"-thick cymbal felts. ... Read more

Product Description

Featuring a stainless steel shaft, the unique, self-aligning Speedball beater automatically swivels to optimize the angle and impact area of its flat playing surface. Many top drummers, including Terry Bozzio, Danny Carey, and John Blackwell have chosen the Speedball. ... Read more

Features

• Stainless steel shaft
• Unique, self-aligning Speedball beater
• Choice of plastic, felt, or rubber

Reviews (1)

Excellent performance and value
Although my favorite beater is the Slug Percussion Power Head Jazz Pro Titanium model (ASIN: B0002F5G2A), this beater is a close second in performance and - at a significant savings in price - a better value.

I use this beater mainly on my Axis X (shortboard) pedal (ASIN: B0002F7HVS), but it also works well on my DWP pedal.Regardless of which pedal you use, you'll feel an immediate difference in performance, especially after you tweak the shaft weight to suit your personal style and feel.The best feature is the swiveling head that automatically aligns to meet your drum head perfectly.This feature alone will make a big difference in sound.

This model has a felt head, which suits the style of music I play, but is also available with a plastic head (ASIN: B0002F4LZS) or rubber head (ASIN: B0002F4M0C).Choose the head type that fits your style of playing and invest in it - and see, hear and feel a dramatic improvement in your pedal's performance. ... Read more

Product Description

Professional Drummers Gloves by AHEAD Features "HOT SPOT" Pads For Longer Life With Wrist Support For Extended Play Comfort. ... Read more

Features

• Drummers Gloves

Product Description

Is your favorite pedal losing it's tension? Don't want another pedal? Or is your pedal too good to replace? Here is an inexpensive solution to this problem! Universal, fits on any spring-drivel model. ... Read more

Product Description

Tailor degrees of damping and attack without removing the head or reaching inside the drum. The EMAD consists of a 10mil single ply with two interchangeable damping rings that maximize attack and low-end. ... Read more

Features

• Clear single ply (10 ml)
• Two externally mounted adjustable damping rings (One .75" thick and one 1.5" thick.)
• Maximizes natural attack characteristics
• Tremendous dynamic range
• Allows quick, easy adjustments without having to remove the head from the drum!

Product Description

The Memokey is a combination torque wrench and drum key that allows players to pre-select a tension level for tuning any drum, giving them a super fast way to tune. By using a thumbwheel with numeric settings, drummers quickly and accurately tune all of their drum lugs without undertightening or overtightening. The Memokey alerts a drummer when a lug has been sufficiently tightened ... Read more

Features

• Fast, accurate
• Works like a torque wrench

Reviews (1)

This actually works - and works well
I purchased this key on a whim.When it arrived the instructions were not clear, but I sat the dial to #2, loosened all of the lugs on my floor tom and went around my lugs using opposing lug patterns, and tested the first cut of tuning. Too loose and deep, so I increased the setting to #3 and repeated.Almost the sound I wanted, so I used a regular key and went an eighth turn using the same pattern.Perfect.I then started on the next largest tom, working back to the smallest.Using the #3 setting plus an eighth turn I got my toms 1/2 octave apart.

Next I worked on my snare drum, starting with the snare side, then the batter side. I used #4 on the batter side and #5 on the snare side, and managed to get the crisp, yet warm, sound I wanted. The bass drum came next - I set the batter side tension 1 notch below the resonant side and achieve a great tuning. From there I went back and set the resonant sides of each of my four toms one notch higher than the batter side and marveled at the perfect tuning I attained.

This is an easy device to use - with the lever facing you move it to the left, loosen all of your lugs, then tighten each starting with one or two. When the lever clicks and moves to the right position you have reached the torque setting.Test, increase a notch if necessary, and repeat until you get the sound you want. Set the resonant heads either one notch higher or lower to make sure the batter and resonant heads do not cancel each other (and to your desired sound), and you will have a perfectly tuned set.

I'll never go back to tuning by ear!You'll be amazed by the results if you tune with this key, and don't forget to write down your optimum settings. ... Read more

Product Description

These patented cymbal holders mount on any cymbal stand. The free movement of the Cymbal Spring? helps to absorb impact to protect the edge and center hole of the cymbal. The yellow heavy spring is recommended for China cymbals and Ride cymbals 18? and larger. ... Read more

Features

• Mounts on any cymbal stand
• Helps to absorb impact
• Protects the edge and center hole of the cymbal
• Available in medium or heavy weight

Product Description

Don't throw your Vic Firth timpani mallets away, repair them with these recover kits. Instructions included. ... Read more

Product Description

3/4"-thick cymbal felts. ... Read more

Product Description

The Bill Lordan Stick Clip II keeps 2 drumsticks mounted on the side of any drum. Easily installed by inserting a single drum lug screw through a mounting hole while special felt ends help protect the drum's finish and keep contact with the drum shell to a minimum. Co-developed by Jim Lemon and Bill Lordan, the former drummer for Robin Trower and the drummer for Sly and the Family Stone. ... Read more

Features

• Holds 2 drumsticks
• Attaches to side of drum on single lug
• Felt ends protect drum finish

Product Description

The trim and unobtrusive Min-EMAD removes unwanted frequencies, retaining the desired attack, resonance, and feel. A deceptively simple damping device based on solid acoustical principles, the Min-EMAD consists of a fabric ?bridge? that links the resonant head with the relatively inert, metal counterhoop. When attached by Velcro dots to both head and rim, the Min-EMAD removes overtones by controlling the vibration of the head. With absolute minimal intrusion on the batter (or the resonant) surface, the result is a focused, unchoked tone. For minimal overtone reduction, the Min-EMAD can be attached to the head close to the rim; for increased damping, it may be positioned further from the rim. Maximum damping is achieved when the Min-EMAD is extended to its full length or used on both the batter and resonant heads. ... Read more

Product Description

Save BIG when you buy today! ... Read more

Product Description

Save BIG when you buy today! ... Read more

Product Description

Put some snap back into your snare with this 20-strand replacement. ... Read more

Product Description

Tailor degrees of damping and attack without removing the head or reaching inside the drum. The EMAD consists of a 10mil single ply with two interchangeable damping rings that maximize attack and low-end. ... Read more

Features

• Clear single ply (10 ml)
• Two externally mounted adjustable damping rings (One .75" thick and one 1.5" thick.)
• Maximizes natural attack characteristics
• Tremendous dynamic range
• Allows quick, easy adjustments without having to remove the head from the drum!

Product Description

The only 6-arm Vented Impact Pad for single foot pedal beater. Patented design protects drumhead and improves strike articulation. Flexing arms with venting increases sound projection without muffling. Recommended with the Slug Power Head Beater for ultimate bass drum performance. ... Read more

Features

• Protects heads from dings and dents
• Made of tough, wear-resistant polycarbonate film
• Increases sound projection
• Does not muffle or reduce drum resonance
• Improves beater, mallet, and stick-strike articulation