Product Description

The Bag End INFRASUB-12 is a self powered subwoofer system employing a direct radiating 12" cone loudspeaker in a sealed enclosure and a 400 Watt power amplifier mounted to an aluminum plate on the back of the enclosure. The INFRASUB-12 also includes a built-in INFRA dual integrator providing a flat acoustical response down to 8 Hertz, well below the audible range of human hearing. Applications:Home StereoHome TheaterProject StudioSpecifications:Enclosure: 3/4" MDFLow Frequency Transducer: EL-12P 12" ConeAmplifier Output Power: 400 Watts continuous sine waveINFRA Module: 8 Hz dual integratorSystem Type: 1.5 cu. ft. Sealed boxDriver Nominal Impedance: 4 OhmsInput Connectors:Left, Center, and Right channel line level RCA jacksLeft and Right speaker level spring terminalsHi-Pass Outputs: Left, Center and Right channel line level RCA jacks; 12dB per octave, -6dB at 95 HzFrequency Response: +/-3 dB 8 Hz to 95 Hz (2pi Steradians) INFRA system -6 dB frequency 95 Hz (not adjustable)Overload Protection: Preset threshold Concealment™ circuitryFuse: 6.3 Amp GDC time-lagFinish: Black textured paintGrille: Black nylon cloth on frameMagnetic Shield: Low flux leakageDimensions (H x W x D): 15.5" x 18" x 15.75" (39.4 x 45.8 x 40.1cm)Weight: 57 lbs (25.86 kg)Shipping Weight: 66 lbs (29.94 kg) ... Read more

Product Description

The Bag End INFRASUB-18 is a self powered subwoofer system employing a direct radiating 18" cone loudspeaker in a sealed enclosure and a 400 Watt power amplifier mounted to an aluminum plate on the back of the enclosure. The amplifier also includes a built in INFRA dual integrator providing a flat acoustical response down to 8 Hertz, well below the audible range of human hearing. Specifications:Enclosure: 3/4" MDFLow Frequency Transducer: EL-18P 18" ConeAmplifier Output Power: 400 Watts continuous sine waveINFRA Module: Patented 8 Hz dual integratorSystem Type: 3 cu. ft. Sealed boxDriver Nominal Impedance: 4 OhmsInput Connectors:Left, Center, and Right channel line level RCA jacksLeft and Right speaker level spring terminalsHi-Pass Outputs: Left, Center and Right channel line level RCA jacksHi-Pass Filters: 12dB per octave, -6dB at 95 HzFrequency Response: +/- 3dB 8 Hz to 95 Hz (2 pi Steradians)Overload Protection: Preset threshold Concealment(tm) circuitryFuse:6.3 Amp GDC time-lag for 120 Volts3.15 Amp GDC time-lag for 220 VoltsFinish: Black textured paintGrille: Black nylon cloth on frameDimensions (H x W x D): 23.5" x 21.5" x 18.5" (59.7 x 54 x 46.3cm)Weight: 91 lbs (41.05 kg)Shipping Weight: 103 lbs (46.72 kg) ... Read more

Product Description

Complement your home theater or studio system with a powerful subwoofer from the new Tannoy TS Series. The ultimate performance in either a traditional stereo or 5.1 surround system, the TS8 offers power and accuracy that will satisfy even the most discerning customer. The TS Series utilizes long throw transducers that are carefully designed to maximize the low frequency extension while maintaining the ability to deliver high sound pressure levels required by todayâs music and film soundtracks. The TS Series employs state of the art electronic circuitry to control and integrate into a 2-channel or 5.1 system and provide increased dynamics and a cleaner transient response. The result is a system that provides the accurate, musical bass dynamics needed for todayâs modern recordings and soundtracks with the impact and depth that was intended. Specifications:Output power: 200W RMSLow Frequency Response (-6 dB): 32 HzLimit for usable output: 18 HzInputs: 2 x line level phono, 2 x XLR balancedOutputs: 2 x XLR balancedInput Filter: 2nd order low pass, 50 Hz-150Hz, -6 dBPhase controlCrossover defeat switch for LFE operationSoft limiting to avoid overloadLF extension controlDimensions: 292mm x 280mm x 255mm (11.5" x 11.5" x 10")Weight: 7.0 kg (15.4 lbs)Mains voltage: 120V nominal AC ~, 60 Hz; 230V nominal AC ~, 50 HzMains fuse: 120V - T2AL / 250V; 230V - T1AL / 250VMaximum power consumption: 275 VAAuto mute: After approximately 12 mins. w/o input signalDriver Type: (8") ... Read more

Product Description

The JRX118S is driven by a massive JBL 18" woofer with a cast frame and 3" voice-coil. It's rated at 350 watts (continuous) and 1400 watts (peak) - and that's based on JBL's 100 hour torture test. They've even created settings for the dbx DriveRack? speaker controller that will let you get every last bit of performance from your JRX118S system.Frequency Range (-10dB): 38 Hz -300 HzFrequency Response (+/-3dB): 55 Hz - 300 HzSensitivity (1w/1m): 96 dB SPLNominal Impedance: 4 OhmsPower Capacity: 350 wattsPeak Power Capacity: 1400 wattsRecommended Amplifier Power: 350 watts to 700 watts into 4 OhmsMaximum SPL: 127 dBRecomended Crossover Settings: 30 Hz HPF, 24 dB / octave; 80 - 100 Hz LPF, 24 dB / octaveLow Frequency Driver: JBL 2043-GInput Connectors: Neutrik Speakon NL-4 (x1); 1/4" TRS phone jack (x1); parallel ... Read more

Product Description

The SWA1501 is a 15-inch high output, active subwoofer system. It features a high precision 15-inch transducer combined with application specific amplifier technology. The system is composed of a single, compact subwoofer cabinet with built in control and amplifier target. 128dB Peak Output.Extremely powerful system capable of real, professional output levels.Extended bass response from a compact enclosure allows you to enhance and extend the bass performance of any small to medium full range active or passive PA cabinet.Compact cabinet provides highest output per cubic inch possible in its class.Level control (-15dB to +5dB). High efficiency 15" woofer with high temperature inside/outside coil technology. Drivers are designed specifically for the SWA1501 - no "off the shelf" components.13-ply Baltic Birch enclosure finished in black splatter paint. Cast aluminum side handles. Signal present LED.Limit LED (Indicates that active protection circuitry is engaged). The transducer used in the SWA1501 system features a 3-inch, inside/outside wound voice coil that offers extreme power handling capabilities. The magnetic assembly used features advancements in coil venting and structural cooling that provides lower temperature rise and substantially improved power compression characteristics.   The amplifier module found in the SWA1501 cabinet is an example of application specific amplifier design that can... ... Read more

Product Description

The C10.1 packs a large 10" subwoofer in a tuned high performance enclosure to give amazing low frequency performance down to 45Hz! The 10.1 is one of the only quick mount ceiling subwoofers available on the market. Flexible installation and powerful low-end performance make this an ideal companion to any EVID model. Features a secure 4-point mounting system which makes installations fast and easy. Comes complete with mounting support ring and tile rails. No additional accessories needed for most installations. ... Read more

Product Description

The SWA1501 is a 15" high output active subwoofer system. It features a high-precision 15" transducer combined with application-specific amplifier technology. The system is composed of a single compact subwoofer cabinet with built-in control and amplification.The transducer used in the SWA1501 system features a 3", inside/outside wound voice coil that offers extreme power handling capabilities. The magnetic assembly used features advancements in coil venting and structural cooling that provide lower temperatures and substantially improved power compression characteristics.The amplifier uses a proprietary high-efficiency, high-current amplifier designed to provide high current levels at all levels of operation. Having access to high current levels, no matter what the power output, is absolutely critical in achieving precise, total control of the woofer mass. This control is responsible for lowering audible distortion artifacts and providing aggressive attack through the operating band pass of the system. The amplifier is mounted on a large, finned aluminum heat sink, and is rated at 500W RMS continuous output.The SWA1501 features a sophisticated on board control system, allowing for flexible integration with active or passive full range or mid/high speaker systems. The input panel accepts a line-level input signal and has loop-out connectors for signal routing to other devices. It also has high-pass output... ... Read more

Features

• 128dB peak output
• Extended bass response
• Compact cabinet
• Level control (-15dB to +5dB)
• RCF precision high efficiency 15" woofer

Product Description

The SWA1801 is an 18-inch high output, active subwoofer system. It features a newly designed high precision 18-inch transducer combined with application specific amplifier technology. The system is composed of a single, compact subwoofer cabinet with built in control and amplifier electronics. 900 watts RMS continuous output / 1400 watts peak output135dB Peak Output.Extremely powerful system capable of extreme output levels.Extended bass response from a compact enclosure allows you to enhance and extend the bass performance of any small to medium full range active or passive PA cabinet.Compact cabinet provides highest output per cubic inch possible in its class.Level control (-15dB to +5dB).RCF Precision high efficiency 18" woofer with high temperature inside/outside coil technology.Drivers are designed specifically for the SWA1801 - no "off the shelf" components.13-ply Baltic Birch enclosure finished in black splatter paint.Cast aluminum side handles.Signal present LED.Limit LED (Indicates that active protection circuitry is engaged).The transducer used in the SWA1801 system features an RCF Precision 4-inch, inside/outside wound voice coil that offers extreme power handling capabilities. The magnetic assembly used features advancements in coil venting, composite polyimide former construction and structural cooling that provides lower temperature rise and substantially improved power compression characteristics.The amplifier module f... ... Read more

Product Description

The Infrasub 18 PRO is a self powered professional subwoofer system employing bass management, hi pass filtered outputs, a sealed front firing 18" cone loudspeaker, and the INFRA dual integrator driving a 400 watt power amplifier providing a flat acoustical response down to 8 Hertz. Six inputs allow the combining of all the bass information on 5.1 surround programs and 2 level controls and a 10dB attenuator provide relative adjustment of the bass information from the 5 full range channels and the dedicated low frequency effect channel. 5 hi pass line level filtered outputs are provided for the upper range loudspeakers and a line level INFRA output is provided for additional INFRA bass speakers. Internally set Dynamic Filter protection maintains undistorted audio reproduction under accidental overload conditions. A remote indicator module is provided and may be placed in a convenient visible location to indicate the dynamic filter protection threshold has been reached. Specifications:Input Configuration: 6 Balanced XLR female line level Output Configuration:5 Balanced hi-pass XLR male line level1 Balanced INFRA XLR male line leve Frequency Response: +/-3 dB 8 Hz to 95 Hz INFRA Cutoff Frequency: 8 Hz or 20 Hz Output Power: 400 Watts Low Frequency Transducer: 18" ConeMagnetic Shield Black textured paintGrille: Black nylon cloth on frameDimensions (H x W x D): 23.5" x 21.25" x 18.25" (59.7 x 54 x 46.4cm)Weight: 92 lbs. - 41.73 kgShipping Weight: 104 lbs. - 47.1 kg ... Read more

Product Description

The Electro-Voice ® EVID 12.1 is a subwoofer system designed to complement the EVIDTM line of full-range loudspeakers. The 12.1 is ideal for supplementing the bass response of any EVIDTM model in an indoor application. The 12.1 adds the extra dimension of a powerful low end where foreground music is desired.The 12.1's slot-loaded design allows for flexible mounting and placement while delivering the smoothest bass response possible. The 12-inch high-excursion woofer, with its dual voicecoil design, enables both the L/R channels to feed into the speaker while at the same time providing crossed-over outputs for up to 4 satellite speakers. If desired, the 12.1 can be powered separately for an even more powerful presence. The 12.1 features reinforced steel-fastener construction that allows for a variety of mounting configurations. All mounting hardware is included. 12-inch High-Excursion LF Transducer Trapezoidal Shape allows for flexible placement. Extremely High Power Handling and High Sensitivity. Dual Voice Coil Design accommodates both Stereo Channels Crossed-Over Pass-Thru Connections for up to 4 Satellite Speakers. LF Transducer: 12" (300 mm) High-Excursion Dual Voice-Coil. Terminals: Spring-Loaded. Encolsure Material: MDF, Steel Fastener Reinforced. Included Accessories: Mounting Bracket and Hardware. Dimensions (H x W x D): 16.25" x 23" x 12" (412 x 584 x 305 mm) Net Weight: 40 lbs. (18.1 kg) ... Read more

Features

• Freq. Response (-10 dB): 40 Hz - 180 Hz
• Power Handling: 175W Cont. Program Per Coil
• Sensitivity (SPL 1W/1m): 106 dB
• Impedance: 8 Ohms
• Max Calculated SPL: 125 dB

Product Description

The MPro MP255S is a dual fifteen inch subwoofer in a dual-tuned band-pass enclosure designed to supplement and extend the low-frequency output of full-range systems in a variety of portable and fixed applications. The band-pass design combined with an internal Low Pass Filter (LPF) assures solid performance in bi-amplified or single amplified systems. While configured for vertical orientation, the speaker may also be used in a horizontal position when a larger footprint and lower vertical height are preferred. Dimensions (H x W x D): 37.4" x 20.75" x 37.0". Weight: 115 lbs. ... Read more

Features

• Dual 15", band-pass subwoofer
• Frequency Ressponse (+/-3dB): 38Hz to 160Hz
• Power: 500 Watts, 2,000 Watts Peak
• Input Connectors: Neutrik Speakon NL-4 (x2); factory wired for pin 1+/- operation, user configurable for 2+/- operation
• Included Accessories: 24" long, 35 mm (diameter) steel pole

Product Description

Ruggedly built, exceptional sound, most affordably priced - ProPower Series (tm) from Nady Audio delivers the best value available in small to mid-sized venue PA speakers. The PSW15 is a 15 in. subwoofer speaker with a 2 in. voice coil, 50 oz. magnet, 20-500Hz response, and 600W peak program power rating. ... Read more

Features

• All horns with high compression piezo drivers
• Durable black carpet cover
• Heavy duty plastic protective corners
• Speaker stand insert on top of cabinet
• Binding post (banana jack) and two 1/4" (6.3 mm) jack inputs

Product Description

For those who prefer the simplicity of a self-powered subwoofer, JBL offers the JRX118SP. It comes loaded with a massive JBL 18" woofer and a specially designed amplifier that delivers 500 watts (peak) and 300 watts (continuous) output. Features: dual inputs with balanced XLR connectors; built-in stereo crossover network (great for systems with EON or other powered satellite speakers); peak limiter that protects the amplifier and speaker from clipping. Frequency Range (-10dB): 38 Hz -300 HzFrequency Response (+/-3dB): 55 Hz - 300 HzAmplifier Power: Peak 500 watts; Continuous: 300 watts with <0.2% THDMaximum SPL: 123 dBLow Frequency Driver: JBL 2043-GInput Connectors: XLR/M x 2 (line level, balanced); 1/4" TS phone jack x 1 (speaker level)Output Connectors: XLR/F x 2 (Selectable, Thru or High Pass) ... Read more

Product Description

Features: Compact 18" subwoofer in a bass reflex enclosure Power handling of 600 watts (2,400 watts peak @ 4 ohms) Dual Speakon inputs 35mm pole mount socket on top Freq. response: 40Hz - 300Hz Size: 24.3"h x 21.2"w x 23.6"d. Wt. 64 lbs. ... Read more

Features

• JBL's MP-418S is an 18" subwoofer in a compact bass reflex enclosure. With power handling of 600 watts (2400 watts peak) it can crank out massive amounts of bass thunder.

Product Description

B-52 folded-horn subwoofers provide the advantage of low-frequency horn loading from powerful and cost-effective cabinets, which are suitable for a wide variety of high-output applications. LX-Series enclosures provide high-efficiency, low distortion, increased headroom and a superior transient response. The LX-Series subwoofer will outperform any conventional direct radiating system by 3-6 dB at distances of 75-150 feet. Thats up to twice the SPL at these distances! These subwoofers will add earth-shaking, chest thumping bass to any system, so we highly recommend reinforcing your dance floor or stage before use! SPECIFICATIONS: Nominal Impedance: 8 Ohms Frequency Response: 30-250 Hz Continous Power Hand: 750w Available Peak Pwr: 1500w Peak SPL: 135 SPL@ 1w, 1m: 104 Dimensions WxHxD in: 24x36x36 Weight LBS: 160 ... Read more

Features

• The LX-18 takes traditional folded horn subwoofers to the next level. The cabinet is built to withstand the abuse of the road and is backed by a LIFETIME construction warranty. A newly designed internal compression chamber provides intense, clean and controlled bass. At the heart of the LX-18 is the new B-52 18-200L subwoofer with a cast-aluminum frame, a massive 200oz magnet and an innovative 4 dual-layer tempered aluminum voice coil.

Product Description

The PANARAY MB4 modular bass loudspeaker is a 200W, low-frequency loudspeaker that can be used for indoor permanent installations and for portable applications. Multiple MB4 speakers can be combined to effectively create a larger single bass enclosure resulting in higher SPL.The MB4 speaker?s output, bandwidth and size make it useful as a single bass unit, or as a modular building block to match other Bose products in most professional systems. The MB4 speaker can also be used in conjunction with the MB4 Endfire or Broadside bass array brackets and the PANARAY System Digital Controller to create directional bass. The PANARAY MB4 modular bass loudspeaker offers the following features:Wide frequency range, from 40Hz to 300Hz, which can be easily matched to any Bose professional loudspeakerHigh impact output for dominant bass materialRugged portable enclosure with metal grille and carrying handlesDistinctive stylingRecessed back plate with two Speakon? NL4 connectorsFull complement of brackets to simplify installationsThe MB4 speaker can be used with the Bose PANARAY System Digital Controller to provide smooth accurate spectral response over the entire operating range of the system. The MB4 speaker can also be used with the Bose 1600 or 1800 amplifiers in combination with the MB4 plug-in EQ card to provide active equalization for the system.Frequency Range: 40Hz to 300Hz ?3dBSensitivity: 87dB-SPL @ 1W, 1m (pink noise)Maximum Acoustic Ou... ... Read more

Product Description

The SW?10 Active Studio Subwoofer joins the popular S?5 and S?8 monitors in TAPCO's active studio monitor lineup. Developed by the renowned Mackie studio monitor team, the SW?10 outperforms anything in its class - both sonically and aesthetically. This versatile and compact "mini-sub" offers loud, punchy, and precise low-end down to 34 Hz. With its natural bass, full, powerful sound and superior frequency response, the SW?10 is the perfect compact subwoofer to add low-down thump to your tracks. Features:Flat frequency response (?3 dB, 34 Hz to 110 Hz)10" high-precision woofer with dual-voice coil120-watt power amplifierHigh-strength cabinet constructed of 5/8" MDF compositeHigh-density adiabatic fiberfill absorbs internal reflectionsBalanced XLR and unbalanced RCA input and high-pass output connectorsIndividual left and right 24 dB/octave Linkwitz-Riley crossovers, adjustable from 55 Hz to 110 HzRear panel power switch and AC voltage selectUser-adjustable sensitivity controlPolarity SwitchSpecifications:Free Field Frequency Response: 34 Hz ? 110 Hz (?3 dB)Lower Cutoff Frequency: -3 dB @ 34 HzUpper Cutoff Frequency: -3 dB @ 110 HzMaximum SPL @ 1 meter, 7.5 dBu into both Balanced Inputs: 103 dB SPL @ 1mLow Frequency Driver: 10 in/254 mm woofer with steel frame,dual voice coil, and paper coneRated Power: 120 watts rms into a 4 ohm load (60 watts rms x 2)Burst Power: 270 watts rms into a 4 ohm ... ... Read more

Product Description

18" speaker with 2" voice coil and 50 oz. magnet cranks out bottom end that will blow out the windows. Durable black carpet cover; reinforced corners; plus binding post, banana jack, and 2 - 1/4" inputs make it perfect for any configuration and road ready. Handles 300W RMS, 600W peak. 20 to 400Hz frequency response. ... Read more

Features

• 18" speaker
• 2" voice coil
• 50 oz. magnet
• Black carpet cover
• Reinforced corners

Product Description

For nearly 10 years Bose researched the benefits and limitations of conventional amplification. The result of this study is a new approach that dramatically reduces performance frustrations we learned existed for both musicians and audience members. The most striking thing about the Personalized Amplification System is whats missing. Theres no monitor, no conventional amplifier, PA system, mixing console or pile of cables. The sound is natural. The musician controls the music. And there is a new, stronger connection between artist and audience. Conventional amplification systems are often limited by the characteristics of conventional loudspeakers. Sound levels traditionally fall off at a rapid rate moving away from the speakers and uneven sound dispersion gives rise to loud spots and dead zones. The L1 Cylindrical Radiator loudspeaker takes a completely different approach. Its unique pole-shaped design delivers a wide dispersion pattern, with nearly 180 degrees of sound coverage. You can hear everyone in the bandand exactly what the audience hears. Lyrics remain crisp and clear, connecting the crowd to each note from the music. And musicians remain in control of the sound, allowing for new levels of collaboration and performance. The PS1 Power Stand is the mechanical support for the system and housing for all the electronics and controls. Its access panel has four inputs for hooking up your vocals and three different instruments. Share the system with a bandmate or connect multiple guitars for quick switches during a show. Two of the channels have presets that adjust the performance of the L1 Cylindrical Radiator loudspeaker for use with a variety of popular instruments and vocal microphones. And the compact R1 Remote Control gives you the freedom to move around without being tied down to a set of controls. Simply attach it to your mic stand or anywhere else and make quick sound adjustments without missing a beat. ... Read more

Features

• B1 Bass Module
• L1 Cylindrical Radiator loudspeaker
• PS1 Power Stand and R1 Remote Control
• Carry bag