Product Description

For nearly 10 years Bose researched the benefits and limitations of conventional amplification. The result of this study is a new approach that dramatically reduces reported performance frustrations for both musicians and audience members. The most striking thing about the Personalized Amplification System is what's missing. There's no monitor, no conventional amplifier, PA system, mixing console or pile of cables. The sound is natural. The musicians control the music. And there is a new, more intimate connection between artist and audience. Conventional amplification systems are often limited by the characteristics of conventional loudspeakers. Sound levels traditionally fall off at a rapid rate moving away from the speakers and uneven sound dispersion gives rise to loud spots and dead zones. The L1 Cylindrical Radiator loudspeaker takes a completely different approach. Its unique pole-shaped design delivers a wide dispersion pattern, with nearly 180 degrees of sound coverage. You can hear everyone in the bandand exactly what the audience hears. Lyrics remain crisp and clear, connecting the crowd to each note from the music. And musicians remain in control of the sound, allowing for new levels of collaboration and performance. The PS1 Power Stand is the mechanical support for the system and housing for all the electronics and controls. Its access panel has four inputs for hooking up your vocals and three different instruments. Share the system with a bandmate or connect multiple guitars for quick switches during a show. Two of the channels have presets that adjust the performance of the L1 Cylindrical Radiator loudspeaker for use with a variety of popular instruments and vocal microphones. ... Read more

Features

• L1 Cylindrical Radiator loudspeaker
• PS1 Power Stand and R1 Remote Control
• Carry bag

Product Description

The SWA1801 is an 18-inch high output, active subwoofer system. It features a newly designed high precision 18-inch transducer combined with application specific amplifier technology. The system is composed of a single, compact subwoofer cabinet with built in control and amplifier electronics. 900 watts RMS continuous output / 1400 watts peak output135dB Peak Output.Extremely powerful system capable of extreme output levels.Extended bass response from a compact enclosure allows you to enhance and extend the bass performance of any small to medium full range active or passive PA cabinet.Compact cabinet provides highest output per cubic inch possible in its class.Level control (-15dB to +5dB).RCF Precision high efficiency 18" woofer with high temperature inside/outside coil technology.Drivers are designed specifically for the SWA1801 - no "off the shelf" components.13-ply Baltic Birch enclosure finished in black splatter paint.Cast aluminum side handles.Signal present LED.Limit LED (Indicates that active protection circuitry is engaged).The transducer used in the SWA1801 system features an RCF Precision 4-inch, inside/outside wound voice coil that offers extreme power handling capabilities. The magnetic assembly used features advancements in coil venting, composite polyimide former construction and structural cooling that provides lower temperature rise and substantially improved power compression characteristics.The amplifier module f... ... Read more

Product Description

The Electro-Voice T18 is a 400-watt subwoofer loudspeaker system which combines the attributes of both horn-loaded and vented-box designs. It utilizes the unique SubScoop cabinet construction with a newly revised DL18MT woofer, as used in the Manifold Technology concert systems.The design behaves like a horn over much of its range, but without the time delay and weight problems usually associated with conventional designs. Vented-box principles take over for the lowest octave and assist in producing exceptionally high levels of clean, punchy bass from a subcompact box. The reverse woofer orientation has been used to optimize the rear chamber volume and decrease the horn flare rate for extended low-end performance.The T18 can be used to augment the bass performance of any Electro-Voice stage system (this may involve the use of appropriate electronics and crossovers). A 13/8-in. standmount receptacle on the top surface of the T18 allows satellite speaker systems such as the T52 and T22 to be used. Dimensions (H x W x D): 32.8" x 24.8" x 25.8". Shipping weight: 119 lbs. ... Read more

Features

• Frequency Response: 45-250 Hz
• Power Handling (continuous): 400 watts
• Neutrik Speakon® and 1/4-inch phone jack inputs
• Impedance: 8 ohms (nominal), 6.6 ohms (minimal)
• Supplied Accessory: Neutrik Speakon NL4FC input cable connector

Product Description

This 18" subwoofer attacks low frequency sound. Featuring two front molded horns coupled to an 18" woofer with a 4" voice coil, this sub can crank out up to 135 dB SPL steady down to 35 Hz. A 900W integrated internal amplifier provides up to 1400W peak power. ... Read more

Features

• 18" active subwoofer system
• Uses 18" RCF Precision woofer with 4" voice coil
• 900W internal high efficiency, high current amplifier provides up to 1400W peak power
• Dual front molded horn design dramatically improves the way the pressure inside the cabinet matches up with the area on the outside for higher output and better efficiency
• Some ask - where's the second horn? The second horn is shaped out of Baltic birch plywood beneath the molded horn.

Product Description

Driven by a massive 18" woofer with cast-aluminum frame and 3" voice coil, it's rated at 350W and contains settings for the dbx DriveRack controller, helping you get top performance out of your JRX100 system. 123dB maximum SPL, 55Hz-300Hz frequency response, 350W continuous power handling, 1,400W peak. ... Read more

Features

• 3/4" acoustically superior MDF cabinet
• 18" cast-aluminum frame subwoofer
• 350W continuous power capacity
• 1,000W peak power capacity
• Heavy-duty recessed handles

Product Description

The JRX118S is driven by a massive JBL 18" woofer with a cast frame and 3" voice-coil. It's rated at 350 watts (continuous) and 1400 watts (peak) - and that's based on JBL's 100 hour torture test. They've even created settings for the dbx DriveRack? speaker controller that will let you get every last bit of performance from your JRX118S system.Frequency Range (-10dB): 38 Hz -300 HzFrequency Response (+/-3dB): 55 Hz - 300 HzSensitivity (1w/1m): 96 dB SPLNominal Impedance: 4 OhmsPower Capacity: 350 wattsPeak Power Capacity: 1400 wattsRecommended Amplifier Power: 350 watts to 700 watts into 4 OhmsMaximum SPL: 127 dBRecomended Crossover Settings: 30 Hz HPF, 24 dB / octave; 80 - 100 Hz LPF, 24 dB / octaveLow Frequency Driver: JBL 2043-GInput Connectors: Neutrik Speakon NL-4 (x1); 1/4" TRS phone jack (x1); parallel ... Read more

Product Description

Compact, front-loaded, passive subwoofer delivers rock-solid low-frequency reinforcement through a 15" low frequency driver. Constructed from birch plywood, fitted with flush handles, polemount socket, rubber feet, internal M10 rigging points, and 2 Speakon NL4MP connectors. 600W handling. ... Read more

Features

• Passive, front-loaded subwoofer
• 15" driver
• 600W handling program
• Birch plywood construction
• Flush handles

Product Description

The Electro-Voice ® Gladiator G115 (15" Loudspeaker) and G118 18" (Subwoofer) are designed to reproduce modern dance music. The perfect system for mobile DJ's... powerful, extended LF response coupled with EV's great HF and unmatched vocal clarity due to RMDTM (Ring-Mode Decoupling). The newly developed EVS-Series woofers and crossover networks reliably produce very high SPL's all night. Roadwood enclosures, steel grilles, high impact corners, and comfortable handles complete the package for years of reliable good looking service.EV's unique system design allows one amplifier channel to drive the subs built-in crossover that provides the Fullrange output. No additional crossovers or amps required for a true 3-way system.The EV Q66 amplifier with up to 850W per channel is the perfect drive for a stereo 3-way rig with one G118 and one G115 per side. Shipping weight: 98.65 lbs. ... Read more

Features

• Frequency Range (-10dB): 32Hz-600Hz
• Power Handling, Continuous: 400W; Peak: 1,600W
• Impedance (Nominal, Min.): 8 ohms, 6.5 ohms
• Connectors: Speakon NL4
• Dimensions (H x W x D): 29.9" x 20.0" x 23.3"

Product Description

Features: The first amplifier channel (the "internal" channel) is dedicated to powering the internal 18" VGC woofer - The second channel (the "external" channel) can be used with a full-range, passive speaker such as the EON-1500 or MP-410 Stereo, high-passed line-outputs are also provided to drive powered satellite speakers such as the EON15 G2 or an external amplifier / speaker system 600 watt, 4 ohm VGC(TM) (Vented Gap Cooling) 18-inch low frequency transducer for unsurpassed performance. Crown dual channel amplifier with 660 watts RMS per channel into 4 ohms or 400 watts RMS into 8 ohms with XLR inputs Flexibility - May be used with passive or powered satellite speakers and includes dual XLR pass through/high pass outputs 1/4" powered outputs to external speaker Enclosure constructed of 7-ply, 18 mm plywood and coated with JBL's exclusive DuraFlex(TM) - a rugged, advanced, poly-urea finish 16 gauge, hexagon perforated, steel grill Heavy-duty steel carry handles. Heavy-duty casters mounted on the rear of the enclosure for easy transport. 35 mm pole mount receptacle in top of speaker enclosure Subwoofer Freq. response: 38Hz-150Hz. Size: 24.3"h x 21.19"w x 30.57"d. Wt. 119 lbs. ... Read more

Features

• The MP-418SP combines an 18-inch subwoofer system and a Crown 600 watt power amp in one compact portable system.

Product Description

The SWA1501 is a 15-inch high output, active subwoofer system. It features a high precision 15-inch transducer combined with application specific amplifier technology. The system is composed of a single, compact subwoofer cabinet with built in control and amplifier target. 128dB Peak Output.Extremely powerful system capable of real, professional output levels.Extended bass response from a compact enclosure allows you to enhance and extend the bass performance of any small to medium full range active or passive PA cabinet.Compact cabinet provides highest output per cubic inch possible in its class.Level control (-15dB to +5dB). High efficiency 15" woofer with high temperature inside/outside coil technology. Drivers are designed specifically for the SWA1501 - no "off the shelf" components.13-ply Baltic Birch enclosure finished in black splatter paint. Cast aluminum side handles. Signal present LED.Limit LED (Indicates that active protection circuitry is engaged). The transducer used in the SWA1501 system features a 3-inch, inside/outside wound voice coil that offers extreme power handling capabilities. The magnetic assembly used features advancements in coil venting and structural cooling that provides lower temperature rise and substantially improved power compression characteristics.   The amplifier module found in the SWA1501 cabinet is an example of application specific amplifier design that can... ... Read more

Product Description

The Force i Sub makes it easy and cost-effective to add solid, low-end response to any sound system. Thanks to its very solid enclosure and a powerful, cast frame 18-inch woofer, the Force i Sub can add substantial bass response to many two-way full-range speakers.An important feature of the Force i Sub is that it is designed to be paralleled with the Force i two-way full-range speaker system on a single amplifier channel. The Force i sound system combining the Force i two-way, Force i Sub and Eliminator i power amplifier rivals larger and much more expensive biamped sound systems for overall sound quality and output capability.The Force i Sub?s powerful 18-inch woofer has a four-layer voice coil and nearly two inches of total excursion capability for tremendous air moving capability with reliability. Force i Sub?s woofer was designed to have less midrange response so that its input filter reduces the mids and highs to allow parallel operation with a full-range system. Force i Sub?s RoadWoodTM enclosure is much stronger and lighter than particleboard or MDF and has excellent acoustical properties too.The Force i Sub has a built-in metal stand mount and comes with a removable 34-inch steel pole to elevate EV two-way systems. It also comes with rear-mounted casters and a 3-stage, luggage-style expandable metal handle to make moving easy. The handle can also be removed to prevent rattles during use or to prevent damage in transportation. The enclosure is finished ... ... Read more

Product Description

Compact, front-loaded, passive subwoofer delivers rock-solid low-frequency reinforcement through an 18" driver. Constructed from birch plywood, fitted with flush handles, polemount socket, rubber feet, internal M10 rigging points, and 2 Speakon NL4MP connectors. 600W handling. ... Read more

Features

• Passive, front-loaded subwoofer
• 18" driver
• 600W handling program
• Birch plywood construction
• Flush handles

Product Description

Dual 15" woofers in a tuned, vented cab produce serious bottom end. Cab doubles as a polemount base. EAW's FR Series is designed for musicians and DJs who play small-to-medium-sized venues and require highly accurate sound but don't have a lot of capital. 18-ply-to-the-inch Baltic birch construction with durable polyurethane coating and ergonomically placed handles make the cabs long-lasting and easy to move. Professional-quality transducers provide amazingly accurate sound. 1,000W handling. 2 parallel Neutrik NL4 Speakon connectors. 33"W x 20"H x 30"D. 130 lbs. ... Read more

Features

• Dual 15" woofers in a bi-directional, tuned, vented cab
• Cab doubles as a polemount base
• 18-ply-to-the-inch Baltic birch construction
• Durable polyurethane coating
• Ergonomically placed handles

Product Description

The SWA1801 is an 18" high output, active subwoofer system. It features a newly designed high precision 18" transducer combined with application specific amplifier technology. The system is composed of a single, compact subwoofer cabinet with built-in control and amplifier electronics. Dimensions (H x W x D): 28.5" x 23.5" x 23.5". Shipping weight: Weight: 132 lbs. ... Read more

Features

• Power: 900W continuous, 1200W peak
• Frequency Response: 45Hz to 120Hz
• Input Connectors: Stereo bal./unbal. female XLR
• High Pass Output and Loop-Through: Stereo bal./unbal. male XLR
• 3/4" thick 13-ply baltic birch plywood, High-quality splatter black paint, One handle on each side, 4 moving wheels (2 swivel with bushing-mounted ball bearings)

Product Description

If you need low-end and lots of it for your performances, you already know there's nothing like a subwoofer. You probably also know that buying a sub and a crossover and another amp to power it means you'll need to spend a lot to get that bass. The Dual 15" MP255S changes all that. First, the MP255S is among the most affordable subs in its class. But there's more to the story than just great value in a high-performance subwoofer. You see, the MP255S is a bandpass design. This means that it uses two tuned chambers to shift its energy down into the low frequency region where you really need it.And it's also got a low-pass filter to get rid of the remaining mid-range output. So all you hear from the MP255S is bass, with no mid-range output to interfere with your main speaker system. So you can simply plug the MP255S into your existing amplifier (Be sure to review the specs of your amp to see if it can handle the combined load of your existing speakers and the MP255S) and get immediate gratification without buying another amp and crossover.Specs: Power Capacity: 500 watts. Peak Power Capacity: 2000 watts. Frequency Response: 38 Hz - 160 Hz (?3 dB). Input Connectors: Neutrik? Speakon? NL-4 (x2); factory wired for pins 1? operation, user configurable for 2? operation. ... Read more

Product Description

The Electro-Voice ® EVID 12.1 is a subwoofer system designed to complement the EVIDTM line of full-range loudspeakers. The 12.1 is ideal for supplementing the bass response of any EVIDTM model in an indoor application. The 12.1 adds the extra dimension of a powerful low end where foreground music is desired.The 12.1's slot-loaded design allows for flexible mounting and placement while delivering the smoothest bass response possible. The 12-inch high-excursion woofer, with its dual voicecoil design, enables both the L/R channels to feed into the speaker while at the same time providing crossed-over outputs for up to 4 satellite speakers. If desired, the 12.1 can be powered separately for an even more powerful presence. The 12.1 features reinforced steel-fastener construction that allows for a variety of mounting configurations. All mounting hardware is included. 12-inch High-Excursion LF Transducer Trapezoidal Shape allows for flexible placement. Extremely High Power Handling and High Sensitivity. Dual Voice Coil Design accommodates both Stereo Channels Crossed-Over Pass-Thru Connections for up to 4 Satellite Speakers. LF Transducer: 12" (300 mm) High-Excursion Dual Voice-Coil. Terminals: Spring-Loaded. Encolsure Material: MDF, Steel Fastener Reinforced. Included Accessories: Mounting Bracket and Hardware. Dimensions (H x W x D): 16.25" x 23" x 12" (412 x 584 x 305 mm) Net Weight: 40 lbs. (18.1 kg) ... Read more

Features

• Freq. Response (-10 dB): 40 Hz - 180 Hz
• Power Handling: 175W Cont. Program Per Coil
• Sensitivity (SPL 1W/1m): 106 dB
• Impedance: 8 Ohms
• Max Calculated SPL: 125 dB

Product Description

The SWA1501 is a 15" high output active subwoofer system. It features a high-precision 15" transducer combined with application-specific amplifier technology. The system is composed of a single compact subwoofer cabinet with built-in control and amplification.The transducer used in the SWA1501 system features a 3", inside/outside wound voice coil that offers extreme power handling capabilities. The magnetic assembly used features advancements in coil venting and structural cooling that provide lower temperatures and substantially improved power compression characteristics.The amplifier uses a proprietary high-efficiency, high-current amplifier designed to provide high current levels at all levels of operation. Having access to high current levels, no matter what the power output, is absolutely critical in achieving precise, total control of the woofer mass. This control is responsible for lowering audible distortion artifacts and providing aggressive attack through the operating band pass of the system. The amplifier is mounted on a large, finned aluminum heat sink, and is rated at 500W RMS continuous output.The SWA1501 features a sophisticated on board control system, allowing for flexible integration with active or passive full range or mid/high speaker systems. The input panel accepts a line-level input signal and has loop-out connectors for signal routing to other devices. It also has high-pass output... ... Read more

Features

• 128dB peak output
• Extended bass response
• Compact cabinet
• Level control (-15dB to +5dB)
• RCF precision high efficiency 15" woofer

Product Description

The new EL-36 replaces the legendary SL-36, which had long been one of Cerwin-Vegas most popular designs. The EL-36 features significant improvements including a new enclosure design to optimize the horn characteristics; a newly designed 18" woofer with new adhesives and voice coil technology for sustained power handling and performance; a universal pole mount, which makes it an ideal performance companion for use with the V-152MKII and a new cabinet and castor design for easier transport. ... Read more

Features

• 18" Folded Horn loaded bass
• Perfect for PA/PLAYBACK/DISCO
• 106 dB Sensitivity at 1 WATT/1 METER
• Use with any CV's full range systems to optimize extended bass response
• Universal pole mount

Product Description

The SWA1501 is a 15 in. high output, active subwoofer system. It features a high precision 15 in. transducer combined with application specific amplifier technology. The system is composed of a single, compact subwoofer cabinet with built in control and amplifier Target. ... Read more

Product Description

The Electro-Voice ® Sb121 bass module is a compact, lightweight woofer system that is designed to add bass enhancement to EV Sx Series speaker systems. The Sb121 combines the advantages of a long-throw 12-inch woofer with a lightweight, yet strong polypropylene enclosure. The EV Sb12 woofer was developed specially for the Sb121 and has a specially designed deep frame geometry. Its Kevlar composite cone and special surround give it nearly 2 inches of total excursion capability.The Sb121 should be used in conjunction with an active crossover with a minimum roll-off rate of 12-dB-per-octave to filter response above 200 Hz. It is also sensible to optimize the Sb121's output and protect it by using a subsonic filter at 40 Hz in the signal chain. The optional Electro-Voice AC-One loudspeaker controller provides easy adjustments for crossover filtering, variable subsonic filtering, a flexible 3-band EQ and LPN processing for added bass impact.The Sb121 can handle 300 Watts continuous, 1,200 Watts peak and can be safely used with amplifiers in that power range, as long as they are not driven to clipping. Using 1/2 or 1/4-space loading as well as mutually coupling multiple Sb121's give this small box very impressive output capability. The Sb121's parallel Neutrik Speakon connectors allow loss-free signal connection. Frequency Range (-10 dB): 45 Hz - 600 Hz, Recommended High-Pass Frequency: 43 Hz. Sensitivity (SPL 1W/1m): 95 dB. Max. Calculated SPL: 126 dB. ... Read more

Features

• Lightweight -- Only 32 lbs/14.6 kg -- and compact
• Very durable polymer enclosure, can be stacked, stand-mounted and safely suspended.
• 300 Watt continuous, 1,200 Watt peak power handling
• Parallel Neutrik Speakon high current input connectors
• Dimensions (H x W x D): 23.1" x 16.9" x 12.3" (586 x 429 x 312 mm)