Product Description

The SUB-15 is a compact direct-radiating 15 subwoofer that delivers performance found in products twice the size and price! Installers will immediately see the benefit of a high-power subwoofer (500 watts program/1000 watts peak) in a package the size of a beer cooler! The SUB-15 fits anywhere: Beneath a table or hidden behind a lounge covered with red Naugahyde. Frequency Response: 32 Hz - 150 Hz Power Handling Program: 500 watts Peak: 1000 watts Sensitivity: (1watt/1meter) 101 dB Nominal Dispersion: (H x V) Omnidirectional Impedance: 4 ohms Components Low Frequency: (1) 15" woofer with single 3" voice coil. Diecast aluminum frame. Crossover: 150 Hz 6 dB/oct. low pass (SUB-15) 150 Hz 6 dB/oct high pass (mid-high out) Both filters may be bypassed Connections: (1) Neutrik SpeakonTM and (1) 1/4" phone jack (input) (1) Neutrik SpeakonTM and (1) 1/4" phone jack (out to mid-high) Enclosure: Compact plywood cabinet in durable grey carpet. Proprietary multiple distribution porting design. Features: Compact. Recessed handles. Steel grille. Metal corners. Rubber feet. 1 3/8" (35 mm) socket mount. Dimensions:(H x W x D) Inches: 24 x 18.5 x 19.25 cm: 61 x 47.5 x 49 Weight:(unpacked) 51 lb. ... Read more

Product Description

The Eliminator i is a 2-way 15" system which features the latest EV technology to produce the clarity only heard in Concert Series cabinets rather than in a stage system. EV woofers and compression drivers stand up to the test and pass with flying colors even when you are running to the max. Steel grilles and carpet protect it on the road. The low-frequency woofer is coupled with a High-Q horn to provide sound that can fill all the cornors of the room. ... Read more

Features

• 15-inch two-way system with 350 watts continuous, 1,400 watts peak power handling.
• High-Q 60o x 40o horn projects well even in difficult acoustic environments.
• DL15BFH woofer and large enclosure volume delivers impressive bass response.
• Ring-Mode Decoupling (RMD) delivers accurate reproduction of voices and instruments.
• Well-designed crossover with Power Tracking Protection helps minimize the effects of overdriving

Product Description

Features: Two 15" woofers 17" horn Five 3" tweeters Metal corners Full metal grill · 4 Ohms impedance · 600 watts ... Read more

Features

• Two 15" woofers
• 17" horn
• Five 3" tweeters
• Metal corners
• Full metal grill

Product Description

High-Q 60? x 40? horn projects well even in difficult acoustic environments. DL15BFH woofer and large enclosure volume delivers impressive bass response. Ring-Mode Decoupling (RMD) delivers accurate reproduction of voices and instruments. Well-designed crossover with Power Tracking Protection helps minimize the effects of overdriving. RoadWood enclosure is strong, yet light. Industrial-grade carpet covering holds up well during the abuse of transportation. ... Read more

Product Description

Features: Dual 15" 3-way speaker Power handling capacity: 1500 watts peak 4 ohm impedance Low frequency voice coil size: 2.5" Midrange voice coil size: 1.5" High frequency: 44mm titanium compression driver Frequency response: 38Hz - 17kHz Sensitivity (1w/1m): 100dB Connectors: 1/4" and Speakon Rugged construction and polyurethane finish Ergonomically optimized VegaGrip handles Size: 49"h x 18"w x 19"d. Wt. 86 lbs. ... Read more

Product Description

Slammin' bass, accurate mids and clean highs! This three-way speaker is perfect for bands, churches, groups with vocal ensembles and anywhere that accuracy and fidelity are important. The SR1530 delivers high definition, high output, and wide dispersion. Three amplifiers power this speaker! 300 watts for the lows, 100 watts for the mids and 100 watts for the highs. The SR1530 is loaded with one 15" low- frequency transducer, a 6" speaker for the mids and a 1" high frequency driver. Additional features include: RMS limiting (monitoring and limiting of continuous rms output of amplifiers), Thermal Monitoring (monitoring of thermal condition of power supply and amplifiers) This means that a high temperature condition engages input stage shut down and auto reset function. Custom perforated oval steel grille with anti corrosive treatment. Mackie made the SR1530 easy to move thanks to a generous amount of handles (one on top, one on bottom cap, two three-piece handles on each side). ... Read more

Features

• 15-inch LF transducer with Inside/Out- side heat-resistant voice coil and high- flux magnetic circuit/6-inch horn-loaded midrange/1-inch-exit compression driver
• Trapezoidal Baltic Birch plywood enclosure with rugged molded resin end caps
• Weight-balanced with side handles for easy carry and set up
• Top and bottom handle for easy repositioning
• Full electronic and component protection circuitry

Product Description

Features: 12" 3-way speaker Power handling capacity: 500 watts, 750 watts peak 8 ohm impedance Low frequency voice coil size: 2.5" Midrange voice coil size: 1.5" High frequency 44mm titanium compression driver Frequency response: 55Hz - 17kHz Sensitivity (1w/1m): 96 dB Connections: 1/4" and Speakon Size: 28.5"h x 16"w x 17"d. Wt. 50 lbs. ... Read more

Features

• The Cerwin-Vega PSX-123 is the best performing speaker in its class. With the flexibility to be used as a stand-alone system or augmented with our subwoofers, this little monster simply rocks. The high frequency driver is coupled to a 100 x 50 horn and the mid-range transducer is loaded into a proprietary waveguide. Rated at 750-watts peak with a frequency response of 55Hz to 17kHz, the PSX-123 is an amazing value.

Product Description

The Electro-Voice ® SxA360 sets a new standard for powered speakers. Its design provides the user a simple to use system with plenty of power in very compact, lightweight, attractive package.This is a full range loudspeaker ideal for most applications requiring high-quality sound. The SxA360 offers a unique combination of high SPL, natural frequency response, and dynamic headroom in an extremely lightweight package. Its linear response provides excellent feedback-free sound without additional equalization.The high-frequency section of the SxA360 utilizes a molded-in, 65° x 65° constant-directivity horn. This unique pattern contributes to high intelligibility, vocals sound natural yet ?cut through? in reverberant, noisy rooms. Coverage pattern is uniform, sound quality off-axis is very well maintained, even at 45° off axis (a 90° total coverage angle). The SxA360's high-frequency horn is driven by the DH2T, a one-inch- throat, wide-bandwidth, titanium-diaphragm driver using a unique, convex-drive TimePathTM phasing plug structure for smooth and extended high-frequency response.Built-in suspension points and pole mount make it easy to position for your application without expensive accessories. ... Read more

Product Description

Features: Built-in Mackie FR Series power amp delivers 500 watts to the speaker components 15" woofer with inside/outside heat-resistant voice coil 6" horn loaded midrange 1" exit compression driver Fully electronic component protection system built in High definition, high music output, and wide sound dispersion Frequency response: 40Hz-20kHz Electronic equalization, time correction and phase alignment Baltic Birch plywood cabinet with rugged molded resin end caps and weight-balanced carry handles (sides, top and bottom) Size: 43.9"h x 19.1"w x 18.1"d. Wt. 100 lbs. ... Read more

Features

• Mackie's SR-1530 is a unique 3-way system that delivers enhanced fidelity and detail to vocals and instruments that fall in the critical midrange frequency spectrum. This 3-way system is perfect for everything from hard rock and rap, metal to country, church or acoustic groups with vocal ensembles or string and woodwind instruments - anywhere that accuracy and fidelity are important.

Product Description

Use surface-mount Atlas Sound SM Series loudspeaker systems for commercial, professional and residential applications or where highfidelity sound and weather-resistance is desired. Full-range frequency response makes these systems ideal for indoor and outdoor installation, in monaural and stereo foreground or background music systems, and for applications in boutiques/shops, restaurants/cafes, leisure, recreation/sports centers and houses of worship. Multi-position, C-shaped mounting bracket and rugged construction provide optimum installation flexibility and assurance of long-term service.Environment-resistant SM82 Series loudspeaker systems offer quality sound reproduction and contemporary styling in a compact enclosure. System components consist of a highly efficient woofer section and 1" exit compression driver frequency device. Vocal and musical clarity is optimized by the mathematically conceived, advanced design of the Atlas Sound TRX Control WaveGuide high frequency director. This design provides smooth, even sound coverage (65°H x 65°V). The high frequency section is symmetrical, for equal coverage in both vertical and horizontal cabinet mounting positions. High frequency component protection is provided by the Atlas Sound PolyGuard protection circuit. Both drivers feature low-flux-leakage designs enabling the speaker to be used in close proximity to video monitors. PRICING SHOWN IS PER SPEAKER. ... Read more

Features

• Highly efficient 8" Hycone treated woofer
• 1" exit titanium high frequency compression driver
• Atlas Sound TRX WAVEGUIDE? A constant directivity style high frequency wave guide system provides accurate, even high frequency coverage
• Atlas Sound POLYGUARD high frequency circuit diverts damaging transient signals to protect the tweeter
• All 1/4"-20 hardware Inserts allow easy integration of "off-the-shelf" security hardware

Product Description

The MVP25 is a rugged, high-sensitivity, two-way, full-range loudspeaker system. The system utilizes one LM20? proprietary high-frequency compression driver coupled to an exponential horn and one 12" woofer for high sensitivity and excellent power handling capability. These components are matched to an optimally tuned direct radiating bass reflex enclosure. The recessed handles, black carpeted exterior and injection molded corners also make this system attractive, rugged and easily transportable.The MVP25 offers a robust internal crossover with Thermal Link? Dynamic HF Driver Protection. The proprietary Thermal Link? Dynamic HF Driver Protection circuit provides both over-current and thermal protection for added performance and reliability. Designed as a stand-alone full-range loudspeaker system, the MVP25 offers enough bass for most foreground/background and speech reinforcement applications. For more demanding applications, extended bass can be achieved by adding a MVP subwoofer. Features: Signal present LE. Thermal Link? HF Driver protection. LM20? Low mass ferrofluid-cooled non-metallic diaphragm. Heavily braced MDF construction. Two ¼" input connectors, and two locking connectors. Sensitivity 1W/1m: 94 dB SPL (80 Hz - 12.5 kHz 1/3 octave bands); 94 dB SPL (250 Hz - 4 kHz speech range). Crossover Frequency: 2 kHz. Inputs on (2) 1/4? jacks, (2) Locking Connectors. (H x W x D): 20.9" x 14.5" x 13.8" Weight: 34 lbs. ... Read more

Features

• Nominal Impedance: 8 Ohm
• Operating Range: 70 Hz - 16 kHz; 80 Hz - 14 kHz (+/-4.5dB
• Max Input Ratings: 150W continuous, 375W Program, 35 volts RMS, 77 volts momentary peak
• Recommended Power Amplifier: For maximum SPL: 310W to 450W @ 8 Ohms
• Maximum Output: 116 dB SPL / 123 dB SPL (peak)

Product Description

Features: Mackie 500 watt power amp is fully integrated into the enclosure and is cooled by a massive aluminum heat sink 15" long throw woofer Highly detailed and articulate bass response down to 40Hz Size: 24"h x 18"w x 23.6"d. Wt. 105 lbs. ... Read more

Features

• There's a lot of bass in this little box. At just two feet high, the SWA-1501 pumps out low end for days

Product Description

The Electro-Voice ® Gladiator G115 (15" Loudspeaker) and G118 18" (Subwoofer) are designed to reproduce modern dance music. The perfect system for mobile DJ's... powerful, extended LF response coupled with EV's great HF and unmatched vocal clarity due to RMDTM (Ring-Mode Decoupling). The newly developed EVS-Series woofers and crossover networks reliably produce very high SPL's all night. Roadwood enclosures, steel grilles, high impact corners, and comfortable handles complete the package for years of reliable good looking service.EV's unique system design allows one amplifier channel to drive the subs built-in crossover that provides the Fullrange output. No additional crossovers or amps required for a true 3-way system.The EV Q66 amplifier with up to 850W per channel is the perfect drive for a stereo 3-way rig with one G118 and one G115 per side. ... Read more

Product Description

The Electro-Voice Eliminator Monitor is a 350-watt 2-way floor monitor that incorporates Electro-Voice's exclusive ring mode decoupling (RMD) technology. The Eliminator monitor features a constant directivity 80° x 55° horn in a vertical orientation that provides usable monitor angles of 50° and 65°. The combined professional quality Electro-Voice manufactured components arrange in a horizontal array with a very durable/road worthy light weight enclosure. The result is a very high performance system with excellent vocal reproduction and extended bass response.The Eliminator Monitor incorporates Electro-Voice's exclusive ring mode decoupling technology. This technology deals with the common resonance or "ringing modes" found in all loudspeaker systems. It deals with mechanical modes utilizing mechanical solutions, and deals with acoustical resonant or ringing modes utilizing acoustical solutions. The result is substantially cleaner vocal reproduction and a response that is more uniform regardless of input level conditions. Features: Exclusive Ring Mode Decoupling (RMD) Integral stand adaptor PRO circuit provides HF driver protection Constant-directivity 80° x 55° horn Usable monitor angles of 50° and 65° 350-watt long-term rms power capacity Dual 1/4-inch phone jack or dual Neutrik Speakon® inputs ... Read more

Product Description

The MVP36 is a rugged, high-efficiency, two-way, full-range loudspeaker system. The system utilizes one LM20™ high-frequency driver coupled to a Pattern Control horn and one 15" cast frame woofer for high efficiency and excellent power handling capability. These components are matched to an optimally tuned direct radiating bass-reflex enclosure. The recessed handles, black carpeted exterior and injection molded corners also make this system attractive and rugged.The MVP36 offers a robust internal crossover with Thermal Link™ Dynamic HF Driver Protection. The crossover is built to last with high quality inductors, precision wound coils and military grade circuit boards. The proprietary Thermal Link Dynamic HF Driver Protection circuit provides both over-current and thermal protection for added performanceand reliability.Designed as a stand-alone full-range loudspeaker system, the MVP36 offers enough bass for most applications. For more demanding applications, extended bass can be achieved by adding a MVP subwoofer. Mounting is easily accomplished utilizing the threaded inserts provided and optional mounting kits. This product should never be suspended by its handles. ... Read more

Product Description

The Electro-Voice Sx80 is an excellent choice for a wide range of uses. In studios, clubs, bars, theaters or churches, these compact, two way, high-efficiency systems deliver exceptional vocal clarity to wide areas. Their high sensitivity, high power-handling capacity and mounting versatility makes them ideal in both portable applications on small stages and fixed applications in larger and distributed settings.They have a unique design and Ring Mode Decoupling (RMD) to deliver clean, uniform output to parts of an audience that do not typically receive strong coverage. The Sx80 delivers vocals with high intelligibility and a natural sound that cuts through in reverberant, noisy rooms. 8" 2-way 90x65 horn, 175 Watts long term power. ... Read more

Product Description

Use surface-mount Atlas Sound SM82T Series loudspeaker systems for commercial, professional and residential applications or where high-fidelity sound and weather-resistance is desired. Full-range frequency response makes these systems ideal for indoor and outdoor installation, in monaural and stereo foreground or background music systems, and for applications in boutiques/shops, restaurants/cafes, leisure, recreation/sports centers and houses of worship. Multi-position, C-shaped mounting bracket and rugged construction provide optimum installation flexibility and assurance of long-term service. Environment-resistant SM Series loudspeaker systems offer quality sound reproduction and contemporary styling in a compact enclosure. System components consist of a highly efficient woofer section and 1" exit compression driver frequency device. Vocal and musical clarity is optimized by the mathematically conceived, advanced design of the Atlas Sound TRX Control WaveGuide high frequency director. This design provides smooth, even sound coverage (65°H x 65°V). The high frequency section is symmetrical, for equal coverage in both vertical and horizontal cabinet mounting positions. High frequency component protection is provided by the Atlas Sound PolyGuard protection circuit. The SM82T includes an internally mounted 60 watt 70.7V/100V line matching transformer with screwdriver adjustable tap selection. PRICING SHOWN IS PER SPEAKER ... Read more

Product Description

The Electro-Voice ® Sx100+E is a 200-watt, 12-inch two-way, high efficiency, constant-directivity portable speaker system. Through the extensive use of computer-aided design and modeling, Electro-Voice engineers have developed a stateof-the-art professional loudspeaker system. Its performance and physical design make it perfect for many applications requiring quality sound in portable and fixed environments.The high-frequency section of the Sx100+E utilizes a moldedin, 65° x 65° constant-directivity horn. This unique pattern contributes to high intelligibility, vocals sound natural yet ?cut through? in reverberant, noisy rooms. Coverage pattern is uniform, sound quality off-axis is very well maintained, even at 45° off axis (a 90° total coverage angle). Specifications: Frequency Response (-10 dB): 60 Hz-25 kHz. Sensitivity: 98 dB. Max SPL: 127 dB. Impedance: 8 ohms Nominal, 5.6 ohms min. Horizontal Coverage: 65°. Vertical Coverage: 65°. Power Handling: 200W Continuous, 800W Peak. LF Transducer: 12" (300 mm). HF Transducer: 1" (25 mm) exit DH3 Comp. Driver. Connectors: Neutrik Speakon. Enclosure Material: Copolymer. Grille: Powder Coated Steel. Dimensions (H x W x D): 23.1" x 16.9" x 12.3". Net Weight: 32 lbs. Shipping Weight: 35 lbs. ... Read more

Product Description

The Electro-Voice ® SxA100+ sets a new standard for powered speakers. Its design provides the user multiple inputs with mix capability, an easy to use EQ section, and plenty of power in very compact, attractive package. This is a full range loudspeaker ideal for most applications requiring high-quality sound. Careful attention to the dynamic requirements of music guided the amplifier design to provide high SPL without excessive heat. The high quality microphone preamplifier provides great sounding vocals or speech. A master level control sets the desired SPL, and the line input can be mixed and balanced with a microphone with its level control. Its linear response is easily optimized for speech or music with the on board multiband equalization. Dimensions (H x W x D): 23.1" x 16.9" x 12.3". Shipping Weight: 47 lbs. ... Read more

Features

• 2-way system: 12" with 1" compression driver
• Amplifier Power: Low Frequency-350W peak, 150W continuous; High Frequency-80W peak, 50W continuous
• Frequency Response: 50Hz to 20kHz
• Balanced Mic, Line Inputs: XLR, XLR and 1/4" phone Combination; Balanced Output: XLR
• Sold Individually

Product Description

The Electro-Voice Sx80 is an excellent choice for a wide range of uses. In studios, clubs, bars, theaters or churches, these compact, two way, high-efficiency systems deliver exceptional vocal clarity to wide areas. Their high sensitivity, high power-handling capacity and mounting versatility makes them ideal in both portable applications on small stages and fixed applications in larger and distributed settings.They have a unique design and Ring Mode Decoupling (RMD) to deliver clean, uniform output to parts of an audience that do not typically receive strong coverage. The Sx80 delivers vocals with high intelligibility and a natural sound that cuts through in reverberant, noisy rooms. Sold individually. Shipping weight: 19.90 lbs. With push terminals, 8" 2-way 90x65 horn, 175 Watt long term capability. ... Read more

Features

• 8-inch woofer and DH2005 compression driver for great sound and reliable performance
• 175-watt long-term rms power capacity
• Frequency Response: 65-20,000 Hz
• Push-terminal connectors
• Paintable, black polystyrene enclosure