Product Description

The Anchor Mini-Vox's big soundis powerful enough to handle a crowd of up to 200. But because it's designed to be carried while in use,it's very light---a featherweight 5 1/2 pounds. So it's great for tour guides, teachers or anybody who needs a PA system that's extremely mobile. The rugged polyethylene case braves all kinds of punishment, and the entire system resists the effects of Mother Nature. An input jack allows you to plug in a CD player or Walkmanª. With the optional built-in wireless receiver, Mini-Vox becomes one of the lowest-priced wireless sound systems on the market. Set the sound unit down and roam freely up to 200 feet away. Mini-Vox runs for 25-35 hours on a set of size C alkaline batteries; if your Mini-Vox will get daily use, check out the optional rechargeable battery kit. Mini-Vox comes in black, yellow, blue or red, with mic and shoulder strap included. FeaturesWeighs just 5.5 poundsInput jack allows you to plug in a Walkman® or CD playerIncludes wired microphoneComes in black, yellow, blue or redSpecifications:Rated power output: 15 wattsFrequency response: 100 Hz - 12 kHzMax SPL @ rated power: 108 dB @ 1 meterMic input: Lo-Z, 1/4"-phoneMic input (phantom powered): Lo-Z, phantom powered, 3.5 mmCD/Tape input: line level, 3.5 mmBattery type: nine C-size alkaline (not included); optional NiCad battery kit availableOperation time: 25-35 hours (alkaline batteries)Charger input: 13.5 volts DC (use with RC-25 kit only) ... Read more

Product Description

Features: 12" 3-way speaker Power handling capacity: 500 watts, 750 watts peak 8 ohm impedance Low frequency voice coil size: 2.5" Midrange voice coil size: 1.5" High frequency 44mm titanium compression driver Frequency response: 55Hz - 17kHz Sensitivity (1w/1m): 96 dB Connections: 1/4" and Speakon Size: 28.5"h x 16"w x 17"d. Wt. 50 lbs. ... Read more

Features

• The Cerwin-Vega PSX-123 is the best performing speaker in its class. With the flexibility to be used as a stand-alone system or augmented with our subwoofers, this little monster simply rocks. The high frequency driver is coupled to a 100 x 50 horn and the mid-range transducer is loaded into a proprietary waveguide. Rated at 750-watts peak with a frequency response of 55Hz to 17kHz, the PSX-123 is an amazing value.

Product Description

OmniMount's new Stainless Steel series is a unique, top-of-the-line speaker mounting solution assembly, tops for multi-angle useage, safety, and easy of installation. ... Read more

Product Description

The TA5000-C is a portable full range loudspeaker system offering both high fidelity and high efficiency. The Time-Aligned studio quality sound provides detail and clarity not found in other designs. Rugged carpet covered poplar plywood, a stand adapter and recessed handles make the TA5000-C an ideal choice for almost all portable sound reinforcement and musical instrument applications. Specifications:Enclosure: 3/4" 7-ply poplar plywoodLow Frequency Transducer:12" Cone2.5" Voice coil80 oz. MagnetHigh Frequency Transducer:1" Exit compression driver1.25" Titanium diaphragm24 oz. MagnetExponential hornInput Connectors:1 - Dual banana2 - 1/4" Phone2 - Neutrik SpeakonGrille: 16 Gauge black vinyl coated, perforated steelStandard Hardware:2 - Recessed handles1 - 35 mm Stand adapter8 - Interlocking cornersAcoustic & Electrical Specifications:System Type: 2-way vented 3.4 cu. ft.Impedance: 8 OhmsCrossover Network: Passive Time-Align equalizer type at 1.7 kHzTime Offset Between Drivers: < +/- 25 MicrosecondsFrequency Response: 50 Hz to 19 kHz +/-3 dB (4 pi Steradians)Sensitivity: 101 dB SPL (1W @ 1m)Dispersion:90 degrees Horizontal (-6 dB)40 degrees Vertical (-6 dB)Power Handling:200 W continuous sine wave800 W instantaneous peakPhysical Specifications:Finish: Black carpetDimensions (H x W x D): 28" x 22.5" x 18.5" (71 x 57 x 47 cm)Shape: Trapezoidal, 8 degree taper per sideWeight: 70 lbs (32 kg) ... Read more

Product Description

A unique solution for studios with multiple monitors, headphone mixes and tape or digital sources. Provides easy, heretofore impossible to achieve, instant monitor mixes or dubs. Select from three pairs of speakers with dim and mute. Use the talkback mic to give instructions to the musicians in the headphone mix. Push-to-talk also records slates. Includes a headphone amp with level control. Three sets of stereo ins and outs are included, with dubbing capability to three outputs. ... Read more

Features

• Control room out put with level control
• Assignable to three separate outputs
• Talk back mic with push to talk and slate to tape
• 6 segment inputs

Product Description

19" x 10" wide dispersion radial horn High performance compression driver 2-way crossover Inputs: SpeakOn & Dual 1/4", Banana & binding post Heavy duty steel handles & steel corners Carpet finish Impedance: 8 Ohms Frequency response: 24Hz-20kHz Sensitivity: 115db Dimensions: 21.5"W x 50"H x 23"D Shipping Weight: 133 lbs. ... Read more

Product Description

The next generation Explorer Pro is perfect for sound projection in indoor or outdoor settings and playing music during school activities. The unit delivers 110dB of intelligible speech from one sound system designed for users with no technical knowledge. The new Explorer Pro is truly versatile with true AC/DC, a 110/220 power supply and improved battery life. The system is ideal for schools, corporate trainers and places of worship. Features:Weather Resistant speaker ConeUV Treated - Fade Resistant CaseSpeech Projection SwitchBuilt-in CD and UHF Receiver OptionRugged CD Mechanism with Blue Back-lit DisplayIntegrated Circuit Amplifier w/Short Circuit and Thermal Overload ProtectionBass and Treble ControlsXLR Balanced Output, XLR Balanced Mic Input1/4" Line InputSpeakon® Output for XTR-6001Specifications:Rated power output: 60 watts AC mode / 30 watts DC modeW/ companion speaker: 80 watts AC mode / 60 watts DC modeMax SPL @ rated power: 110 db @ 1 meterFrequency response: 80 Hz - 16 kHzMicrophone inputs (2 universal jacks):Lo-Z (1 kOhm), balanced, XLR12 VDC condenser mic (phantom) powerHi-Z (10 kOhm), unbalanced, 1/4"-phoneAuxiliary (line) input: Hi-Z (10 kOhm), unbalanced, 1/8” stereo, 1/4"-phoneSensitivity for rated output, dual RCA/1/4” unbalanced/balanced 1/4"-phoneAC Power requirements: 90 - 264 VAC, 50/60 HzDimensions 16.5 x 10.5 x 10" Weight: 23 lbs ... Read more

Product Description

The SM159z is a compact, professional loudspeaker designed for dual-purpose stage monitor and PA use. Its 15-inch low frequency transducer generates a strong low end without boominess, complemented by a 1-inch exit Neodymium HF compression driver. The smooth HF response and high output capability cuts through stage sound for quality monitoring and provides good projection for PA use. The low profile and compact size are ideal for situations where small physical size is needed, without sacrificing professional performance. Integral mounting points accept a third party external stand adaptor for pole mounting. Portable usage is enhanced by the heavy-duty enclosure construction, foam-backed steel grille, and integral handles. The connector panels on each side have dual Neutrik NL4 jacks for reliable input and loop through connections. ... Read more

Product Description

Explorer Pro companion speaker with Neutrik Speakon connector for use with the AnchorEXP 6000 series. ... Read more

Product Description

The SUB-15 is a compact direct-radiating 15 subwoofer that delivers performance found in products twice the size and price! Installers will immediately see the benefit of a high-power subwoofer (500 watts program/1000 watts peak) in a package the size of a beer cooler! The SUB-15 fits anywhere: Beneath a table or hidden behind a lounge covered with red Naugahyde. Frequency Response: 32 Hz - 150 Hz Power Handling Program: 500 watts Peak: 1000 watts Sensitivity: (1watt/1meter) 101 dB Nominal Dispersion: (H x V) Omnidirectional Impedance: 4 ohms Components Low Frequency: (1) 15" woofer with single 3" voice coil. Diecast aluminum frame. Crossover: 150 Hz 6 dB/oct. low pass (SUB-15) 150 Hz 6 dB/oct high pass (mid-high out) Both filters may be bypassed Connections: (1) Neutrik SpeakonTM and (1) 1/4" phone jack (input) (1) Neutrik SpeakonTM and (1) 1/4" phone jack (out to mid-high) Enclosure: Compact plywood cabinet in durable grey carpet. Proprietary multiple distribution porting design. Features: Compact. Recessed handles. Steel grille. Metal corners. Rubber feet. 1 3/8" (35 mm) socket mount. Dimensions:(H x W x D) Inches: 24 x 18.5 x 19.25 cm: 61 x 47.5 x 49 Weight:(unpacked) 51 lb. ... Read more

Product Description

Liberty is really two sound systems in one. In "Music" mode, it provides rich, full-range music reproduction---the kind you can feel. Flip the switch, and Liberty's tuned especially for speech projection, concentrating its power to make the voice segment of the sound spectrum carry farther. Either way, the MOSFET amplifier and high-output speakers provide powerful sound with virtually no distortion. Liberty can handle a crowd of 1,000---double that with a companion speaker (LIB6001) attached. Its easy versatility and durability make it our most popular sound system. We offer a 75-watt, AC Liberty and, for greater flexibility, a 50-watt model with a built-in battery that runs 6 to 8 hours on a charge. Round out either one with the built-in options: a cassette player, wireless receiver, or a combination of two. Features:Portable - Use indoors or outBattery powered - Up to 6 hours per charge50 watts - Fills an auditoriumUp to 2 wireless micsCD player option - Crystal clear music playbackAdd companion speaker - Covers an athletic field Frequency responseMusic mode: 60 Hz - 15 kHz ± 3 dBProjection mode: +10 dB from 1.5k - 12 kHzMic inputs: Lo-Z, balanced, phantom powered, XLRLine input: Hi-Z, unbalanced, 1/4"-phoneLine output (post fader): buffered, 600 Ohms, 1/4"-phoneAC power requirements:110 - 125Vac, 50/60 Hz, 50W Max210 - 240Vac, 50/60 Hz, 50W MaxDimensions 22.5" x 13" x 10" Weight: 44 pounds ... Read more

Product Description

Unpowered companion speaker for use with Anchor Xtreme sound systems. ... Read more

Product Description

The EVID? series from EV is ideal for background/foreground PA systems. Features include an ABS plastic case, dual woofers for extended bass, coherent coverage waveguide horn, treated woofer cones for added weather resistance, magnetic shielding, durable zinc-plated steel grille, and included cast aluminum Strong-Arm-Mount? (SAM?) system. The supplied mount has over 100-degrees of swing and 45-degrees of rotationsimple keyed hex head adjustments make installations quick and easy. Available in white, add a ?W? to the part number. White finish, pair. ... Read more

Features

• Power Handling: 200W Cont. Prog./400W Peak
• Frequency Response (-10db): 65Hz-20kHz
• Dimensions (H x W x D): 12.2" x 6.9" x 8.5"
• Terminals: Spring
• Included Accessories: SAM, hex key

Product Description

The MVP25 is a rugged, high-sensitivity, two-way, full-range loudspeaker system. The system utilizes one LM20? proprietary high-frequency compression driver coupled to an exponential horn and one 12" woofer for high sensitivity and excellent power handling capability. These components are matched to an optimally tuned direct radiating bass reflex enclosure. The recessed handles, black carpeted exterior and injection molded corners also make this system attractive, rugged and easily transportable.The MVP25 offers a robust internal crossover with Thermal Link? Dynamic HF Driver Protection. The proprietary Thermal Link? Dynamic HF Driver Protection circuit provides both over-current and thermal protection for added performance and reliability. Designed as a stand-alone full-range loudspeaker system, the MVP25 offers enough bass for most foreground/background and speech reinforcement applications. For more demanding applications, extended bass can be achieved by adding a MVP subwoofer. Features: Signal present LE. Thermal Link? HF Driver protection. LM20? Low mass ferrofluid-cooled non-metallic diaphragm. Heavily braced MDF construction. Two ¼" input connectors, and two locking connectors. Sensitivity 1W/1m: 94 dB SPL (80 Hz - 12.5 kHz 1/3 octave bands); 94 dB SPL (250 Hz - 4 kHz speech range). Crossover Frequency: 2 kHz. Inputs on (2) 1/4? jacks, (2) Locking Connectors. (H x W x D): 20.9" x 14.5" x 13.8" Weight: 34 lbs. ... Read more

Features

• Nominal Impedance: 8 Ohm
• Operating Range: 70 Hz - 16 kHz; 80 Hz - 14 kHz (+/-4.5dB
• Max Input Ratings: 150W continuous, 375W Program, 35 volts RMS, 77 volts momentary peak
• Recommended Power Amplifier: For maximum SPL: 310W to 450W @ 8 Ohms
• Maximum Output: 116 dB SPL / 123 dB SPL (peak)

Product Description

The SB1 is a stand-alone speaker mounting stand with swivel bracket designed for Anchor speakers. Color: Black ... Read more

Product Description

The TD2212 is an exceptional 12" 2-way loudspeaker system delivering all of the features required by today's demanding music scene. Predictable high level low distortion operation, multi-stage protection circuitry, remarkable low frequency response - all in a compact, well braced light weight cabinet clad in a high impact exterior finish.The TD2212 features two of Community's patented Cool Coil™ 12" speakers, cleverly designed to draw destructive heat away from the voice coil, thus assuring extended high level operation.Cup handles are provided for easy portability, a built-in stand socket, and four rigging points further enhance the versatility of this system. Each loudspeaker is backed by Community's Five-Year Warranty. ... Read more

Product Description

Full range compact ceiling speakers. Low distortion and a smooth, natural frequency response make the Control 24C/CT Micro ideal for medium volume business music systems as well as for the medium to low SPL segments of larger or louder systems. The Control 24CT Micro includes a multitap transformer for 70V or 100V systems. ... Read more

Features

• 85 Hz to 20 kHz frequency range
• 30 watts continuous program power (15Wpink noise) capacity
• 86 dB sensitivity (1W/1m)
• Shallow steel back-can (only 4 in deep)
• Control 24CT 70V/100V taps: 8W, 4W, 2W, 1W (and 0.5W for 70V only)

Product Description

The Electro-Voice Sx80MB is a mounting bracket for installing the Sx80 loudspeaker on a wall or a ceiling. The kit consists of two nylon washers, two friction washers, two M6 x 20 mm phillips pan washer head screws, and one U-bracket. ... Read more

Features

• Allows for wall or ceiling mounting of an Sx80 speaker system
• Available in black (Sx80MBB) or white (Sx80MBW)

Product Description

12" 2-way multi-purpose cabinet. If you want massive, accurate output in a rugged, compact loudspeaker, this is it! 124dB SPL output features 1.75" HF compression driver with 12" RCF precision long-throw low frequency woofer. ... Read more

Features

• Available in two versions - C300 features Neutrik connectors, C300i features 1/4" jacks
• Wide-dispersion horn assembly with 1.75" HF damped compression driver
• 12" RCF Precision long-throw low frequency transducer gives great low end.
• Cabinet designed where it can be pole mounted, set on stage as studio monitor or flown in air.
• 10 built-in fly points and pole mount socket.

Product Description

Adjustable T-Fitting. Set at any angle in 7.5 degree increments. For 1 1/2" (38mm) tubing. ... Read more