Reviews (2)

A simple and affordable product with good sound
I found the DX4's to be good speakers for the money. If you are into surround sound gaming, they are not for you, but they are perfect for music on the desktop.

Note that these aren't just for computers. They have standard line-level inputs on the back, so you can attach anything to them, such as an iPod or CD player.

The cabinets are sturdy (and heavy). The cones are exposed though; there is no grille to keep curious cats, ferrets or toddlers away from the relatively delicate material of the speakers themselves. Keep this in mind when you choose a location.

The headphone jack on the front is a very nice touch, but I found the midrange boost control feature to be of little value, at least in the room I was in. Your mileage may vary.

Sure, you could go get "real" stereo speakers and an amp to drive them, but if you want some good sound on a budget these speakers with built-in amp will treat you well.

Top of home, office, or studio computer speaker systems!
Just hooked these up yesterday and I am loving them.
I have the top of the line dual 2.5gig G5 mac with 23 inch cinema screen and these are by far as good as the rest of this system.
Was not sure which speakers to get so I went to the Mission Valley Apple store here in San DIego and listened to every set they had on display. There were six sets in all and these studio monitors blew the others away.
The sales person agreed and was surprised because he had dismissed them because they did not look as cool as all the others.
If you are into music and listen to voice recordings then these are for you.
We played the same song on each setup they had and these were the only ones that had full sound and all the highs and lows but most importantly the mid range sounds too.
We discovered that these were the only speakers that played the string instruments on the recording. The other 5 didn't.
If you have an Apple store near by, I reccomend you go and check these out for yourself. Beside the obvious reason of listening to actual studio monitors there, you will be fascinated to see the store of the future, Apple.
Rock on! ... Read more

Product Description

The new EON10 G2 compact powered speaker features a 10" woofer, increased power and a three input mini-mixer. The EON10 G2 is ideal for AV applications, smaller musical and spoken word performances and, when combined with the new EONSUB G2 powered subwoofer, provides a full range sound system for small and medium sized events.The first generation EON10 was very popular, not only with musicians, but with hotels, meeting planners, AV companies and just about any application where portable compact sound reinforcement was needed. Its successor, EON10 G2 offers more power, more flexibility and a refined appearance that will make it even more appropriate for its many types of users. The EON10 G2 has more power than the first generation EON10, with 125 watts for low frequencies and 50 watts for the highs. The 10" Differential Drive low frequency driver uses a neodymium magnet for light weight and reduced distortion. The one-inch JBL 2412 compression driver for the high frequencies includes a titanium diaphragm and ferro-fluid cooling. The EON10 G2 sports a new black exterior material and a mini-mixer with three inputs. An additional XLR output allows EON Speakers to be daisy-chained together. As with other EON G2 speakers, the EON10 G2 is kept cool, not by heatsinks or fans, but by JBL's Thermomaster Total Thermal Management System. With its versatile cabinet design, the EON10 G2 can be used in several different ways. As a front of house speaker, the EON10 G2 can sit ... ... Read more

Features

• 10" Neodymium Differential Drive Woofer
• Built-in 3-input mixer
• 125 watts LF and 50 watts HF amplifier power
• Lightweight Neo magnet makes this unit weight in at half the competition

Product Description

The AN-1000X powered monitor offers big sound to go with a big picture. It's a powerful partner for movie and video projectors, as well as video walls and monitors, computers and multimedia setups. It has inputs to accommodate all of them and a shielded-magnet speaker to prevent interference on video screens. But the AN-1000X is not only powerful, it's accurate. Response from 80Hz-20kHz makes the AN-1000X a popular monitor for sound studios and broadcast facilities. It even sees duty as a portable PA system handling crowds of up to 300. It has a rugged 50-watt MOSFET amplifier and a matched two-way speaker system with ferrofluid-cooled dome tweeter, all packed in a ported enclosure that's tuned for bass punch. The 1000X easily drives a companion speaker, too, like our AN-1001X. Weight is 9.5 pounds, dinensions 5.25"x8.4"x9" FeaturesPowerful 50-watt sound system with response from 80Hz-20kHzMagnetically shielded speakerHas RCA and 1/4" line inputs and mic/line configurable XLR inputSpeaker out drives companion speakerSpecifications:Rated power: 50 watts continuous @ 4 OhmsFrequency response: 65 Hz - 20 kHz ± 3dBMax SPL @ rated power: 103 dB @ 1 meterBalanced input: mic / line configurable, female XLR, switchable phantom powerLine input: Hi-Z, unbalanced, 1/4"-phone & RCALine output: Lo-Z, RCA, buffer isolated line-levelSpeaker output: 8 Ohms, unswitched, 1/4"-phoneAC power requirements:AN-1000X: 110 - 125Vac, 50/60 Hz, 90W MaxAN-1000X/220: 208 - 240Vac, 50/60 Hz, 90W ... Read more

Product Description

Specifications:Rated power: 80 Watts (RMS);Sensitivity: 85 dB;Frequency response: 55 Hz -- 18 kHzLine inputs (2): 1/4", unbalanced, dual RCA jacks (summing L+R)Mic Input: Lo-Z, unbalanced, 1/4"-phoneAC power requirements: 110/220V 50/60 Hz switchable;Dimensions: 11" X 9 3/4" X 17";Weight: 19.45 lbs. ... Read more

Features

• 80 Watts power speaker
• Magnetically shielded speaker
• Unbalanced 1/4" mic input & Two RCAinputs with seperate volume control
• Bass and treble controls
• 90 days money back guarantee and 1 year limited warranty

Product Description

The AN-130CG is the Black version of the AN-130 speaker. Weighing in at only 8.5 pounds, the AN-130 features 30 Watts of amplification, can reach crowds of up to 100 people, has a magnetically shielded carbon fiber speaker, has 1/4” mic and instrument jacks and RCA stereo line input jacks. It also features 65Hz - 18kHz response, and a maximum SPL of 101dB. The speaker's dimensions are 8.3” x 9” x 5.25”. Features:Built-in UHF receiver option101 dB SPL from 30 W amplifier and high efficiency speakerUnbalanced Lo-Z 1/4" mic inputTwo RCA summing line level inputsMagnetically shielded speakerBass & treble controlsWoven carbon fiber speakerSpecifications:Rated power: 30 watts continuousSensitivity for rated output:Line: -20 dBV (100 mVrms)Microphone: -43 dBV (7.5 mVrms)Instrument: -30 dBV (30 mVrms)Frequency response: 65 Hz – 18 kHzMax SPL @ rated power: 101 dB @ 1 meterLine inputs (2): Hi-Z, unbalanced, dual RCA jacks (summing L+R)Mic Input: Lo-Z, unbalanced, 1/4"-phoneInstrument Input: (3k), unbalanced, 1/4"-phoneAC power requirements: 110-125 VAC 50/60 Hz(internally configurable) 210-240 VAC 50/60 Hz (50 watts max)Dimensions (HWD): 5.25 x 8.4 x 9", 13 x 21 x 23 cmWeight: 8.5 lbs, 3.8 Kg ... Read more

Product Description

Weighing in at only 8.5 pounds, the AN-130 features 30 Watts of amplification, can reach crowds of up to 100 people, has a magnetically shielded carbon fiber speaker, has 1/4” mic and instrument jacks and RCA stereo line input jacks. It also features 65Hz - 18kHz response, and a maximum SPL of 101dB. The speaker's dimensions are 8.3” x 9” x 5.25”. Features:Built-in UHF receiver option101 dB SPL from 30 W amplifier and high efficiency speakerUnbalanced Lo-Z 1/4" mic inputTwo RCA summing line level inputsMagnetically shielded speakerBass & treble controlsWoven carbon fiber speakerSpecifications:Rated power: 30 watts continuousSensitivity for rated output:Line: -20 dBV (100 mVrms)Microphone: -43 dBV (7.5 mVrms)Instrument: -30 dBV (30 mVrms)Frequency response: 65 Hz – 18 kHzMax SPL @ rated power: 101 dB @ 1 meterLine inputs (2): Hi-Z, unbalanced, dual RCA jacks (summing L+R)Mic Input: Lo-Z, unbalanced, 1/4"-phoneInstrument Input: (3k), unbalanced, 1/4"-phoneAC power requirements: 110-125 VAC 50/60 Hz(internally configurable) 210-240 VAC 50/60 Hz (50 watts max)Dimensions (HWD): 5.25 x 8.4 x 9", 13 x 21 x 23 cmWeight: 8.5 lbs, 3.8 Kg ... Read more

Product Description

This PA cab is loaded with all the right stuff for full frequency response and excellent room coverage. Drivers include a 15" woofer with high-temperature voice coil, high-compression horn, and 3-bullet super tweeters driven by a 200W amp. The 3-way crossover give you a nice, full sound spread. Features include carpet finish, steel corners, heavy-duty handles, and polemount. Amp section features 2 Neutrik combo microphone inputs; a 1/4" line and dual RCA inputs; and master volume, bass, and treble controls. 19-1/2"W x 30-1/2"H x 18-1/2"D. 62 lbs. ... Read more

Features

• 15" woofer, high-compression horn, and 3-bullet super tweeters
• 200W amp and 3-way crossover
• Carpet finish, steel corners, heavy-duty handles, and polemount
• 2 Neutrik combo microphone inputs, 1/4" line and dual RCA inputs
• Master volume, bass, and treble controls

Product Description

These Ion 5-watt powered speakers deliver clear stereo playback in small- to medium-size rooms. The compact design features an ultra-cool 3D effect that enhances the spatial dimension of your sound, and the front-panel controls are convenient and easy to access. Set of 2. ... Read more

Product Description

The Anchor Xtreme is an AC powered sound system that delivers a powerful 123 dB of crystal clear speech projection. It can have up to three optional wireless UHF receivers installed, and is designed for crowds of 5,000 or more people.This flexible system is switchable to either an efficient voice-projecting system or a full range music-quality system. It provides a wide range of features, including the option of a built-in tapedeck or CD player. It's anideal system for large audiences, indoors or out. Features:Portable - use indoors or out130 Watts / AC power fills a gymUp to 3 wireless micsCD option - crystal clear music playbackAdd a companion speaker - covers a football fieldSpecifications:Rated power outputStand-alone: 130 wattsw/XTR-6001: 200 wattsMax SPL @ rated powerProjection mode: 123 dBMusic mode: 116 dBFrequency responseMusic mode: 80 Hz - 15 kHzProjection mode: +7 dB from 2 - 12 kHzBass/Treble control: 8 db cut/boost @ 100 Hz, 8 kHzLine input: 1/4” phone, Hi-Z, unbalancedMic input: XLR female, Lo-Z, 12 VDC phantom powerBalanced input: XLR female, switchable mic/line level, 12 VDC phantom power (switchable): XLR male, 600 Ohms, active balancedSpeaker Output: 4-pole Neutrik Speakon® jack for XTR-6001AC power requirements:110 - 125Vac, 50/60 Hz, 250W MaxDimensions 22.5 x 13 x 10" Weight: 35 lbs ... Read more

Product Description

This compact, powerful bass enclosure delivers the depth and impact of instruments in the bass/baritone range such as bass, drums, low voices, and low-pitched wind or string instruments. Guitar and keyboard instruments can also benefit from the additional low-end output the B1 provides. Includes one Bass Module cable. ... Read more

Features

• Compact, powerful bass enclosure delivers the depth and impact of instruments
• Includes one bass module cable

Product Description

Features: 2-way biamplified, optimized active system - no external power amplifier needed! Built-in monolithic FR Series 300 and 100-watt amplifiers Built-in precision 24dB/oct. Linkwitz-Riley electronic crossover 300mm long-throw low frequency transducer High-output precision titanium compression driver Studio quality maximum dispersion horn design High SPL Output/Extremely Low Distortion Electronic Time Correction, Phase Alignment, and Equalization Servo feedback controlled woofer ... Read more

Product Description

The Electro-Voice ? SxA100+ sets a new standard for powered speakers. Its design provides the user multiple inputs with mix capability, an easy to use EQ section, and plenty of power in very compact, attractive package. This is a full range loudspeaker ideal for most applications requiring high-quality sound. Careful attention to the dynamic requirements of music guided the amplifier design to provide high SPL without excessive heat. The high quality microphone preamplifier provides great sounding vocals or speech. A master level control sets the desired SPL, and the line input can be mixed and balanced with a microphone with its level control. Its linear response is easily optimized for speech or music with the on board multiband equalization. Features:Compact, ergonomic sizeMic and Line inputs with mix capacity350 W dynamic LF power80 W dynamic HF powerLF and HF equalizationLine output for additional speakers65? x 65? constant coverage hornHigh sensitivity, 124 dB maximum SPLDynamic filters provide overload protection and linear responseMolded-in pole mount, easily suspendedDriven by the DH2010AF200 monitor feet includedSpecifications:Frequency response (-10 dB): 50Hz-20kHzMax SPL: 124 dBHorizontal Coverage: 65?Vertical Coverage: 65?LF Amplifier Power: 350W 50ms burst, 150W ContinuousHF Amplifier Power: 80W 10ms burst, 50W ContinuousMic Input Sensitivity: -35 dBu to 0 dBu for full... ... Read more

Product Description

The JBL EON15 G2 delivers 300 watts of power to a 15-inch Neodymium Differential Drive low frequency driver. The driver boasts a dual neodymium magnet and dual voice coil motor that delivers high output and low distortion from a lightweight woofer. Meanwhile, the high frequency amplifier delivers 100 watts of power to a 1.75" titanium diaphragm compression driver with ferro-fluid cooling. The EON15 G2 is at home as a main PA or on stage as a monitor or instrument amplification system. Musicians who own an EON speaker can use them singly for casual solo or duo work, or combine multiple EONs into a complete, powerful PA system. Instrumentalists will appreciate the expanded input capabilities of the EON15 G2. With its integral three-input mixer, the EON15 G2 can directly accommodate electronic keyboards, drum machines, electrified acoustic guitars, and microphones. Electric guitarists using the new generation of amplifier modeling modules will find that the clean, full-range sound of EON15 G2 reproduces all of the subtle tones the modules can produce. The new "MIX OUT" feature even provides an output from the internal mixer that can be sent to the main PA, making the EON15 G2 the ideal choice for keyboard or acoustic guitar amplification. ... Read more

Features

• 15" neodymium Differential Drive woofer
• More than 300,000 systems in use today
• 300 watts low-frequency and 100 watts high-frequency power
• Easily transported at only 46 pounds

Product Description

Perfect for a variety of environments where full-range audio is needed but space is limited: restaurants, bars, bistros, department stores, and outdoor venues. Offering the bass response of a much larger speaker, dual 4-inch woofers make the 4.2 a phenomenal performer. The 1-inch waveguide coupled titanium tweeter delivers controlled clean mids and highs. Combine it with the 12.1 subwoofer for an amazing listening experience. Full system protection and EV's unique Strong-Arm Mount. make the EVID 4.2 a solid choice in any environment. Sold in pairs. Shipping weight: 24.25 lbs. ... Read more

Features

• Power Handling: 200W Cont. Prog./400W Peak
• Frequency Response (-10db): 65Hz-20kHz
• Dimensions (H x W x D): 12.2" x 6.9" x 8.5"
• Terminals: Spring
• Included Accessories: SAM, hex key

Product Description

The Eon Power 15 (15? LF driver) speakers feature an innovative shape that allows it to function both as an upright speaker or an angled monitor. Bi-amp power distributes the correct wattage to the high and low frequency drivers insuring optimum performance at any volume level. Ergonomic handles provide balance and ease while carrying speakers. Built-in microphone inputs offer flexibility and convenience when performing, while the acoustically inert, waterproof Polymer enclosures insure rugged durability on the road. ... Read more

Features

• Biamped polypropylene cabinet
• 15" woofer with neodymium magnet
• 2 separate amps (130W LF and 50W HF) with toroidal transformers
• Active built-in crossover
• 17"W x 27"H x 17-1/2"D

Product Description

The Matrix 2000 consists of 2 - 12" 2-way speakers, an 18" subwoofer with a 3-channel amplifier, and circuitry housed in a separate compartment on the sub unit's back. A 600W amp drives the subs, and 2 - 300W amps drive the 2-ways. All of the components are matched for the best possible sound and balance with minimal tweaking. All you have to do is connect the system components, plug in the power cord, plug in your mixer or other sound source, and you're ready to go!The subwoofer enclosure is divided into 2 separate compartments. The front chamber serves as the cabinet for the cast-frame, 4" voice coil and 18" subwoofer. The rear chamber houses all of the system's electronic circuitry, which includes the amplification for all 3 components, power supply, compressor, and preamps. The subwoofer has a power handling capability of 600W and a nominal impedance of 8 ohms.Each 12" 2-way speaker is loaded with a B-52 custom-designed 12" woofer and a 1" titanium diaphragm compression driver, mounted to a 90° x 40° constant directivity horn. The speakers can be pole mounted, used as stage monitors, or flown with built-in 3/8" -- 16 TPI hardware for permanent installations. For transport, they mount onto the subwoofer's front grille. Transporting the system is easy: Move the subwoofer onto its casters and place the included cover over the subwoofer. Next, pull the included covers over the... ... Read more

Features

• Designed for easy operation
• Electronic circuitry fine tuned to match components for best possible sound
• Amplifier houses all the electronics required to run the system
• Speakers are designed to be pole mounted (shown with optional speaker stands)
• Can sit as stage monitors

Reviews (1)

WOWWW!!! AMAZING BASS!!!! NICE MIDS AND HIGHS!!!
PRO'S:
I DEMOED THESE AT MY LOCAL RETAIL SHOP AND LET ME TELL YOU SOMETHING... THESE ARE BY FAR THE BEST SOUNDING SET UP I HAVE HEARD IN MY LIFE!!! I LOVE BASS HEAVY MUSIC FROM ROCK, UK HARD HOUSE, HARD TRANCE... AND RAP.USUALLY SPEAKERS HAVE A CERTAIN "TYPE" OF MUSIC THAT THEY ARE GOOD FOR.ACCORDINGLY YOU BUY THE SYSTEM AND TRY TO COME CLOSE TO WHICH EVER TYPE YOU LIKE. WELL THERE IS NO COMPROMISE WITH THESE "BAD BOYS" THEY WILL DISH OUT CLEANNNN!!! SOUND NO MATTER WHAT TYPE OF MUSIC YOU THROW AT IT.I DEMOED MANY DIFFERENT TYPE OF SONGS FROM RAP, HARD UK, 80'S AND SOME FLAMINGO JAZZ.I WAS BLOWN AWAY AT THE CLEARITY OF THE SUBS.I STOOD AT THE STORE TRYING TO FIND SOME KIND OF MUSIC MATERIAL THAT DID NOT SOUND GOOD ON THESE BUT 1 AND HALF HOURS LATER I WAS SOLD THAT THESE ARE HEAVEN SENT.THEY PUT OUT MUSICAL NOTES NOT BUMP,THUMP AND THUD... EVERY BASS NOTE IS ARTICULATED DETAILED AS I EVER HEARD BEFORE.I'VE STOPPED DROOLING NOW AND CAN'T WAIT FOR MY SET TO ARRIVE... PS ALL THE POWER YOU NEED TO RUN THE SYSTEM IS CONTAINED IN THE SUBWOOFER CABINET.JUST HOOK UP THE XLR'S FROM YOU MIXER AND THE SUBWOOFER BRANCES OUT TO THE (2) 12" MONITORS WITH A TITANIUM MID AND TWEET SET UP... 1200 WATTS TOTAL (2)300 GOING TO THE MONITORS AND (1)600 RUNNING THE BASS!!!

CONS:
AFTER EXPERIENCING THE DETAIL AND CLARITY IN BASS YOU WILL NOTICE THE FLAWS IN OTHER SPEAKER SET UPS BY OTHER COMPANIES. HOPE MY REVIEW IS HELPFULL THANK YOU "DJ M N S" ... Read more

Product Description

The SA1232 is a high efficiency, extreme output, active 3-way, wide dispersion, sound reinforcement speaker system. The SA1232 benefits from the integration of 1300 watts of amplifier power, complete active control electronics, RCF Precision components and a speaker system with 103dB of sensitivity (@ 1 watt/1 meter). The result is unprecedented output, resolution and clarity as well as mid-range reproduction previously available only from high end, esoteric PA speaker systems.The SA1232 features the same horn assembly as introduced in the Mackie Designs SR1530 active 3-way speaker. The horn is a one piece design with 90? x 40? dispersion that integrates both the mid range and high frequency sections. This allows for the horn loading of the mid-range transducer and seamless coupling between the MF and HF sections. The 6-inch mid-range's basket assembly is designed as part of the horn assembly and is also designed to function as an optimized compression chamber, dramatically simplifying the mid-range assembly. Also, in three-way designs the mid frequency horn and the high frequency horn are physically pointing to a different location in front of the box. The SA1232 features an "Optimized Wavefront" horn design. Unlike typical mid / high horns, the high frequency section is positioned to fire down into the six-inch mid-range?s dispersion pattern. This creates a focused, single wave front with excellent phase and power response characteristics.The SA1232 Mid / High Se... ... Read more

Features

• Dual 12" low-mass woofers
• Horn-loaded 6" mid cone
• High-frequency/mid-combination horn
• 3-way amplification totaling 1300W
• 136dB of output

Product Description

The Electro-Voice EVID 12.1 is a subwoofer system designed to complement the EVIDTM line of full-range loudspeakers. The 12.1 is ideal for supplementing the bass response of any EVIDTM model in an indoor application. It is particularly useful in sports bars, dance floors, retail environments, health clubs, restaraunts, etc. The 12.1 adds the extra dimension of a powerful low end where foreground music is desired.The 12.1's slot-loaded design allows for flexible mounting and placement while delivering the smoothest bass response possible. The 12-inch high-excursion woofer, with its dual voicecoil design, enables both the L/R channels to feed into the speaker while at the same time providing crossed-over outputs for up to 4 satellite speakers. If desired, the 12.1 can be powered separately for an even more powerful presence. The 12.1 features reinforced steel-fastener construction that allows for a variety of mounting configurations.The 12.1 is available in black or white, and can easily be painted to match the decor. All mounting hardware is included. ... Read more

Product Description

Providing better sound through active electronics and improved speaker design, Mackie offers their most advanced active design yet! 3-way dual-12" cabinet with 1300-watts of power cranks out 136dB peak SPL and delivers plenty of bass with fast, tight transient response. ... Read more

Features

• Most advanced design. Active speaker integrates internal amplifiers, crossovers & protection.
• Dual 12" low frequency transducers deliver the bass of an 18" woofer but with faster, tighter transient response
• 136dB peak SPL output
• 1300-watts RMS of integrated power (1100W to low frequency, 100W to mids, 100W to highs)
• 90-degree by 40-degree ultra-wide audience coverage with optimized wavefront horn

Product Description

The next generation Explorer Pro is perfect for sound projection in indoor or outdoor settings and playing music during school activities. The unit delivers 110dB of intelligible speech from one sound system designed for users with no technical knowledge. The new Explorer Pro is truly versatile with true AC/DC, a 110/220 power supply and improved battery life. The system is ideal for schools, corporate trainers and places of worship. Features:Weather Resistant speaker ConeUV Treated - Fade Resistant CaseSpeech Projection SwitchBuilt-in CD and UHF Receiver OptionRugged CD Mechanism with Blue Back-lit DisplayIntegrated Circuit Amplifier w/Short Circuit and Thermal Overload ProtectionBass and Treble ControlsXLR Balanced Output, XLR Balanced Mic Input1/4" Line InputSpeakon® Output for XTR-6001Specifications:Rated power output: 60 watts AC mode / 30 watts DC modeW/ companion speaker: 80 watts AC mode / 60 watts DC modeMax SPL @ rated power: 110 db @ 1 meterFrequency response: 80 Hz - 16 kHzMicrophone inputs (2 universal jacks):Lo-Z (1 kOhm), balanced, XLR12 VDC condenser mic (phantom) powerHi-Z (10 kOhm), unbalanced, 1/4"-phoneAuxiliary (line) input: Hi-Z (10 kOhm), unbalanced, 1/8” stereo, 1/4"-phoneSensitivity for rated output, dual RCA/1/4” unbalanced/balanced 1/4"-phoneAC Power requirements: 90 - 264 VAC, 50/60 HzDimensions 16.5 x 10.5 x 10" Weight: 23 lbs ... Read more