Product Description

The ART MicroMIX provides full facilities for connecting a low-impedance or condenser microphone to any preamp - level device. The MicroMix is perfect for those times when you need to connect a low-impedance or condenser microphone to something which does not support it, such as a high-impedance mixer input, a PC sound card , a powered speaker or possibly an instrument amp. In situations like these, the MicroMix's mic preamp acts as an interface, simplifying and economizing the process. On-board phantom power allows you to use the MicroMix with condenser mics. Also included on the MicroMix are a level control and a simple clipping LED indicator to help you to keep the signal clean. ART MicroMix Features:Balanced/low-impedance XLR Input Unbalanced 1/4" Line Input Balanced XLR Line Output and Unbalanced 1/4" Line/Headphone Output +36 volt, Phantom Power for the XLR input with Power On/Off button Power and Clip LEDs Gain control Power: 12V DC (Adapter included) Input Impedance: 10K Ohms balanced and unbalanced Max. Input Level: +4dBV XLR, +10dBV unbalanced Max. Gain: 50dB XLR, 44dB 1/4" Phase Shift: less than 10 degrees 20Hz - 20kHz EIN: less than 0.01% IMD (SMPTE): less than 0.01% Dimensions: 4.5 x 2.875 x 1.5 inch (150mm x 75mm x 38mm) Weight : 1lb (454g) ... Read more

Product Description

Venice is Midas' first truly compact console built in direct response to customer demand.It does exactly what was asked in that it provides a high quality alternative in a huge number of applications where previously Midas was not an option.These range from smaller conference or live band applications, to effects returns or additional inputs in a large multi-console application, or indeed as part of a small complete mobile system.It also provides the perfect feature set for live acts who need to mix their own FOH and monitor sound from on-stage, and is compact and light enough to fit on even the most cramped performance area.As usual, Midas has paid attention to the details that set their consoles apart taking care to provide high quality mic preamps and a stable, responsive EQ section, just as they do on their larger consoles.The simple but intuitive outputs make the overall configuration of the console extremely quick and easy to use. ... Read more

Features

• Inputs (total): 30
• Mono-Inputs (Mic/Line) with Inserts: 8
• Stereo-Line/Mono-Mic-Input Channels: 4/4
• Stereo-Effect-Returns (Line): 4
• Busses: 15

Product Description

The Aphex Audio Level Interface is designed to allow use of -10dBV consumer hi-fi equipment with +4 or +8dBm professional and industrial audio systems.It provides an extremely clean, reliable two-way buffer so both systems can operate at maximum performance levels, matching impedances and operating levels. We are not exaggerating when we tell you that the Aphex 124 is going to make your recording life so much easier!PerformanceAphex products are well known for their audio performance. The 124 is no exception. Inputs and outputs are transformerless, for wide, flat frequency response and perfect square waves to preserve transients. Hum and noise rejection are very high while the noise and distortion are almost non-existent. The 124 is so clean it is a perfectly transparent interface for digital equipment. Two Way BufferingThe 124 is actively balanced and buffered in both directions, with very low output impedances. A more expensive type of balanced input circuit is used for even higher hum and noise rejection. In addition, all inputs and outputs are carefully filtered for freedom from RF interference.Some other devices are passive in one direction, simply using resistors to lower level from +4 to -10. The passive circuitry unbalances the input, eliminates all common-mode rejection allowing for hum and noise pickup, and presents a rather high impedance at the -10 output, permitting even more noise to enter the system ... Read more

Product Description

Venice is Midas' first truly compact console built in direct response to customer demand.It does exactly what was asked in that it provides a high quality alternative in a huge number of applications where previously Midas was not an option.These range from smaller conference or live band applications, to effects returns or additional inputs in a large multi-console application, or indeed as part of a small complete mobile system.It also provides the perfect feature set for live acts who need to mix their own FOH and monitor sound from on-stage, and is compact and light enough to fit on even the most cramped performance area.As usual, Midas has paid attention to the details that set their consoles apart taking care to provide high quality mic preamps and a stable, responsive EQ section, just as they do on their larger consoles.The simple but intuitive outputs make the overall configuration of the console extremely quick and easy to use. ... Read more

Features

• Inputs (total): 30
• Mono-Inputs (Mic/Line) with Inserts: 8
• Stereo-Line/Mono-Mic-Input Channels: 4/4
• Stereo-Effect-Returns (Line): 4
• Busses: 15

Product Description

TOA BG-M Series Mixer/Amplifiers for installed sound system paging, music distribution and messaging applications offer microphone and telephone paging inputs, program and auxiliary music inputs plus a flexible module slot compatible with industry-standard TOA 900 Series modules which have an extensive array of features and connector types. Outputs include transformer-isolated 25 V, 70 V and 4 ohm, balanced, line-level Music-On-Hold plus a 1 watt output for driving an additional 8 ohm speaker zone. Muting modes include an Auto-Mute function for voice-activated paging override of the BGM channels with-out interrupting the MOH output. External mute terminals allow you to activate the mute function with an external switch-closure. Standard features include bass/treble controls, insert jacks and Signal, Clip, and Power indicators. Accessories include optional rack-mount kits and volume control security knobs to protect settings. ... Read more

Product Description

The TOA 900 SERIES are widely recognized as the industry standard in installed sound system amplification. When reliability and performance are critical – such as in paging and music distribution for airport, hospital, and industrial sound systems – you can count on the TOA 900 Series to perform consistently, day-in and day-out.The A-903MK2 (30 W), A-906MK2 (60 W) and A-912MK2 (120 W) Modular Mixer / Amplifiers are engineered for high performance with wide frequency response, very low noise and distortion, and excellent output regulation. Eight module slots allow you to easily configure custom configurations using TOA plug-in modules with an extensive array of features and connector types. You can increase the input capacity by connecting a second mixer or mixer/amplifier to the rear-panel Bridge In / Out jack. Outputs include transformerisolated 25 V, 70 V and 8 ohm (A-903MK2: 4 ohm) plus a direct low-impedance mode if non-transformer operation is required.Multiple paging priorities are easily configured using optional mutetype modules activated by external switch-closure or mute-send modules. Pre-Out / Power-In jacks allow connection of external signal processing between the mixer and amplifier sections. Other features include protection circuitry, auxiliary output, bass / treble controls and remote master volume terminals.The 900 Series Mixer/Amplifiers are UL and cUL Listed and carry a five year warranty. ... Read more

Product Description

The new RM65b HexMix is a single rack space unit featuring 6 channels of audio mixing, each with an XLR Microphone Input and 1/4" unbalanced Line Input. A unique feature of the 1/4" line inputs is they may be internally reconfigured to operate as Inserts for the Microphone Input. Each channel, in addition to its Level control, also features a Clip LED, Monitor Send control, Effects Send control, and Bass and Treble controls. Each Microphone input has switchable 36 volts of phantom power, and a rear panel Trim control. 1-year manufacturer’s limited warranty.Made in the U.S.A. ... Read more

Features

• Front panel Headphone Output
• Monitor, effects send and Pan pots on each channel
• Mono Send, Stereo Return effects loop
• Treble and Bass tone controls for each channel
• R & L Master volumes and FX Return master channel

Product Description

The MX51 is a small 4 channel mixer with individual volume controls, headphone and line outs. It has 2 1/4" inputs and 3 sets of stereo RCA inputs that are mixed to MONO. It has enough gain and output level for a power amp, has 2 RCA and one 1/4" output, and is powered by an included A/C adapter. Input Impedance: 10K Ohms unbal. each jackCH 1 Gain: 32 dB 1/4" jack (max gain)CH 2 Gain: 26dB 1/4" RCACH 3 and 4 Gain: 26dB each RCAOutput: 1/4" stereo and RCAS/N Ratio: 90 dBTHD: .008%IMD(SMPTE): .008%Power: 12VDC adapterWeight: 1 lb. (.45Kg)Size: 3" x 5" x 1.25" (8 x 13x x 3.2) ... Read more

Product Description

The MX44 Is A Four Input, Single Output Line Level Mixer. It Accepts Line or Instrument Level Inputs and Provides A Clean, Line Level Output. ... Read more

Features

• 1/4" unbalanced inputs and outputs
• Output is +4 dB
• Battery included
• AC Power Suply Included
• Four input to mono line-level output

Product Description

The Classic Series of P.A. amplifiers are the result of Bogen's commitment to provide products that meet the need of the commercial sound industry.Each amplifier accommodates up to four inputs: 2 balanced microphone inputs, 1 high impedance auxiliary input, and 1 input from a telephone line, or 1 microphone, 2 auxiliary, and 1 telephone input.A front panel selector switch is used to select either the MIC2 or AUX1 input.Each channel is equipped with its own volume control.Treble and bass controls are provided to adjust tonal balance.Output screw terminals are provided for 8 and 16 ohm balanced and 4 ohm unbalanced systems, and for 25 volt and 70 volt constant voltage systems.Also features a microphone precedence circuit and thermal/electrical protection against abnormal heat build up, short circuits, and overload.UL and CSA listed.Frequency response: 20-20,000 Hz (+/-1 dB).Distortion: <1% 70-16,000 Hz at full rated power.Dimensions: 12-1/2" W x 3-3/4" H x 11" D. ... Read more

Features

• 4 inputs: 1 MIC (Lo-Z), 1 AUX (Hi-Z), 1 TEL, plus 1 selectable MIC or AUX

Product Description

MINIMIXER ... Read more

Product Description

The Gold Series was designed with the sound contractor in mind.Each amplifier has 6 microphone inputs, 2 auxiliary inputs, and 1 telephone paging input.XLR inputs are provided for Mics 1-4, RCA jacks are provided for AUX input, screw terminals for Mics 5 & 6 and telephone input.Output taps include: 8 ohm, 25 volt, 25 volt center tap, 70 volt, and 100 volt, as well as direct 4 ohm, tape out, preamp out, power amp in, and booster out.Other features include: * Dual Equalizer for acoustic shaping or feedback control * Aphex Aural Exciter circuit for added presence and intelligibility * Phantom power * Contour control * Precedence circuitry * Remote volume control * Auto mute on telephone page * Low cut filter * Frequency response: 20-20,000 Hz +0/-1dB (direct), 65-20,000 Hz +0/-2 dB (transformer) * Distortion: 0.5% (max), 0.3% (typical) * Dimensions: 3-1/2" H x 16-1/2" W x 12" D. ... Read more

Features

• 4 dedicated microphone inputs (XLR connectors) 1 selectable Mic/Tel input
• 1 dedicated Aux input 1 selectable Mic/Aux input
• 8-ohm, 25V, 25VCT, and 70V transformercoupled outputs
• Dual-function, 10-band graphic equalizer (Acoustic EQ/Feedback Control)
• Aphex® Aural Exciter for improved intelligibility

Product Description

Mackie all-in-one mixer without compromise. 12x4x2 compact mixer with 16 on-board effects (reverb, chorus, etc.), 8 mic/line channels, and 2 stereo line channels. Just hook up to an amp or active speaker and you're ready to rock. ... Read more

Features

• Compact all-in-one live sound mixer with on-board graphic EQ and digital effects
• True 4-bus design
• 9-band stereo graphic EQ on outputs
• 16 built-in 32-bit EMAC digital effects including reverbs, delays, chorus, flange, etc.
• 3-band EQ with swept mid-range on the mic input channels

Product Description

The MX54S mixes three microphones into two transformer balanced outputs. It has three XLR inputs, each with individually switchable phantom power, and low cut switches, a level control, and a Pan control. As mentioned, it has two transformer balanced, XLR outputs. A 1/4 inch aux/headphone output has been provided along with a clip indicator, power indicator, and power switch. The unit is also powered by two 9-Volt alkaline batteries. ... Read more

Features

• Mixes 3 microphones to stereo XLR outputs
• Output level controls for mic or line-level output
• Transformer isolated outputs
• Phantom power & low-cut switches for each mic input
• Battery & AC powered

Product Description

Folio Powerpad should be the centerpiece of any pro-audio toolkit. Whether you are running a small PA system, rehearsing, presenting, submixing, operating a home studio, or even creating a multimedia project, you can be assured of audiophile standards without the burden of pro-audio prices. Powerpad delivers professional all-in-one mixing and monitoring solutions in a uniquely compact, lightweight frame that's easily transportable between different locations. At the heart of Powerpad's appeal is its rugged power amplifier pumping out a clean 2 x 30 Watts into 4ohms, so that only a pair of speakers is required to create an instant audio system. Shipping weight: 11.60 lbs. ... Read more

Features

• 10 Inputs as standard (4 Mic Inputs, 2 Stereo Inputs)
• 2 x 30 Watts (music power) amplifier with overload and thermal protection
• 2-Band EQ on every mono input
• Global +48V Phantom Power
• Stereo Inputs equipped with switchable RIAA preamps for turntables

Product Description

Phantom power. 400 watts (200 x 2). Individual channel equalization. 1/4" and XLR inputs. Individual monitor level control. Stereo 2-track input channel with 3-band EQ. Dual 7 band graphic equalizer. Effects External foot S/W. Tape record and play jacks. Has built in effects. Reverb, DDL. Dual 5-LED level display. ... Read more

Product Description

The Rane SM 82 is a product offering incredible power and versatility. It is the equivalent of a sixteen channel mixer in one rack space. Measuring only 5.25 inches deep, it can do the job of mixers costing several times as much while only occupying a fraction of the rack space. It is ideally suited for keyboards, synthesizer expander modules and drum machines, as well as such things as effects mixing in guitar racks. It also functions as an excellent submixer for stereo line inputs and effects to a larger console. Because of shorter internal signal paths, it is much cleaner than many mixers ten times the cost and size. Each of the eight stereo (two channel) input channels feature a stereo rotary input Level control, a stereo aux Send level control slider and a left to right Balance control slider. When a single mono input is used, the Balance control acts as a pan pot. The aux return section provides a rotary Return Level control and a slide control for left to right Balance. The output stage includes a rotary Output Level control and a slide control for left to right Balance. Shipping weight: 9.50 lbs. ... Read more

Features

• Inputs: 1/4" mono TS (1-8, receive); 1/4" stereo TRS (expand)
• Outputs: 1/4" TRS
• 1U Rackmountable

Product Description

A 1-input, 6-output portable audio distribution amplifier for routing multiple audio feeds. Ideal as a portable press bridge. Includes: XLR transformer-balanced input and outputs (each switchable for microphone or line level operation), phantom power, link jacks for connecting additional FP16A units or outboard devices, screw-driver-adjustable gain controls. Rack-mountable with A16R. Battery (three standard 9-volt alkaline) or 120/240 Vac power. ... Read more

Product Description

The TASCAM DM-24 is the first affordable digital mixer that combines 24-bit, 96kHz audio quality with highly flexible routing, extremely powerful built-in automation, built-in professional-quality effects, dynamics processing and parametric EQ. To make the DM-24 the ideal companion for serious recorders like the MX-2424, TASCAM engineers used a custom 32-bit floating point processor to ensure true 24-bit performance throughout the digital signal path. Whether youâre mixing for standard CD mastering or more advanced applications in surround encoding or DVD authoring, the DM-24âs superb audio quality blows away the standards in affordable digital mixing.You donât need a computer for the DM-24âs awesome automation...itâs all built in. Up to eight entire mixes can be stored in the DM-24. Once a new mix is opened, the DM-24 automatically goes into its automation mode so that any static changes you make are instantly saved, and you can offload all automation data via MIDI. The DM-24 offers 16 analog inputs with XLR mic and TRS line inputs on each channel as well as 24 channels of TDIF interfacing plus eight channels of ADAT Optical I/O, two stereo AES/EBU and two stereo S/PDIF interfaces. Two option slots are also provided for additional 8-channel analog and digital interface modules or a cascade module.The DM-24 also features highly-configurable gates, fully-parametric 4-band EQs and compression on each channel. ... Read more

Features

• Perfect companion mixer for the MX-2424
• Fully 24-bit, 96kHz compatible from day one
• Flexible 32-channel/8-bus console with 6 aux sends

Product Description

The Model 418 Eight Channel Personal Mixer provides eight channels of basic mic/line mixing facilities in a convenient, easy-to-use rack format. In addition to a selection of XLR mic and 1/4" unbalanced line inputs with volume and tone controls. There is also switch-selectable phantom power available on each mic input. ... Read more

Features

• Eight mic/line channels with individual volume and tone control
• Eight sets of balanced XLR mic inputs and 1/4" unbalanced line inputs
• Phantom power DIP switches, one for each mic input
• 1/4" balanced main out jack
• RCA-type pre-fade out jack can be connected to another 418 via the aux bus in jack