Product Description

The MB15 ProMatch converts consumer level stereo RCA signals to balanced XLR professional line level, and back. One side of the unit, labeled 1, has two XLR inputs and stereo RCA outputs. The other side labeled 2, has stereo RCA inputs and two XLR outputs. Each side has stereo level controls, and an LED indicates that power is applied to the unit. An additional benefit of the MB15 is that it will act as a balanced XLR line level control. By adding a stereo pair jumper between the four RCA jacks (connecting ins to outs), the two Level controls may be inserted into any balanced XLR line. ... Read more

Features

• Stereo RCA to stereo XLR
• Stereo Level control for each channel
• AC Power Supply Included

Product Description

Phantom power. 200 watts. Individual channel equalization. 1/4" and XLR inputs.Individual monitor level control. 3-band master EQ. Reverb/effect level control. 1/4" headphone jack and level control. RCA tape/CD record and play jacks with level control. ... Read more

Product Description

The PS-03 features a 3 band filter effects section with Dry/Wet, Resonance, Tempo control, and Recall buttons, along with 6 line, 3 convertible phono/line, RCA inputs, ?? balance outputs, triple ground screws for easy connectivity, removable face plate for user replaceable Rail Glide cross fader, lighted push button cue section with Cue split/mix switch, dual VU display with bright LED and switch mode, and ?? headphone output and mic input. The PS series from Gemini is the continuation of Gemini?s long tradition with the conception of innovative products, tools for the practical DJ. Features: 10" 3 stereo channel mixer6 line, 3 convertible phono/line, RCA inputsMaster, record, & zone RCA outputs?" balanced outputsTriple ground screw for easy connectivityFilter assign switchDry/Wet & resonance fader controlRotary Q factor control3 filter recall & 3 band pass buttons with LEDDual mode push button for tempo on/off & cue effectRotary tempo control3 band rotary line EQ with cut feature & rotary gain channel controlRemovable face plate for user replaceable Rail Glide cross faderLighted push button cue sectionRotary zone & balance controlsDual VU display with bright LED & mode switchMaster volume fader control ... Read more

Product Description

The RRM3U is designed with a10 Unit slanted top rack for mixers or CD controllers and a 6 Unit vertical rack for amplifiers or effects units. Features an 18" rack depth , 2 removable covers and unique rear hinged door for easy access. ... Read more

Features

• Beefy, Stackable Ball Corners
• Double Anchor Industrial Rivets
• Recessed, Industrial Grade Latches
• Recessed, Spring Loaded Handles
• Industrial Grade Rubber Feet

Product Description

The TOA 900 SERIES are widely recognized as the industry standard in installed sound system amplification. When reliability and performance are critical – such as in paging and music distribution for airport, hospital, and industrial sound systems – you can count on the TOA 900 Series to perform consistently, day-in and day-out.The A-903MK2 (30 W), A-906MK2 (60 W) and A-912MK2 (120 W) Modular Mixer / Amplifiers are engineered for high performance with wide frequency response, very low noise and distortion, and excellent output regulation. Eight module slots allow you to easily configure custom configurations using TOA plug-in modules with an extensive array of features and connector types. You can increase the input capacity by connecting a second mixer or mixer/amplifier to the rear-panel Bridge In / Out jack. Outputs include transformerisolated 25 V, 70 V and 8 ohm (A-903MK2: 4 ohm) plus a direct low-impedance mode if non-transformer operation is required.Multiple paging priorities are easily configured using optional mutetype modules activated by external switch-closure or mute-send modules. Pre-Out / Power-In jacks allow connection of external signal processing between the mixer and amplifier sections. Other features include protection circuitry, auxiliary output, bass / treble controls and remote master volume terminals.The 900 Series Mixer/Amplifiers are UL and cUL Listed and carry a five year warranty. ... Read more

Product Description

Features: 8 channels of AES/EBU digital audio input and output at 96kHz. Direct digital connection between Digital X Bus and other AES/EBU compliant equipment. Uses one female 25-pin D-Sub connector. ... Read more

Product Description

TOA BG-M Series Mixer/Amplifiers for installed sound system paging, music distribution and messaging applications offer microphone and telephone paging inputs, program and auxiliary music inputs plus a flexible module slot compatible with industry-standard TOA 900 Series modules which have an extensive array of features and connector types. Outputs include transformer-isolated 25 V, 70 V and 4 ohm, balanced, line-level Music-On-Hold plus a 1 watt output for driving an additional 8 ohm speaker zone. Muting modes include an Auto-Mute function for voice-activated paging override of the BGM channels with-out interrupting the MOH output. External mute terminals allow you to activate the mute function with an external switch-closure. Standard features include bass/treble controls, insert jacks and Signal, Clip, and Power indicators. Accessories include optional rack-mount kits and volume control security knobs to protect settings. ... Read more

Product Description

The RM68 is designed to mix up to three microphones with three stereo sources, and send them in any combination to two separate zones. Itâs versatile inputs and outputs as well as commercial grade design make it an important problem solver in many audio situations such as restaurants, churches, schools, etc. It also works great as a HiFi preamp. ... Read more

Features

• RM68 ZONE WOLF
• 2-Zones / 6-Assignable RCA Inputs
• 3 XLR Inputs w/Phantom Power
• Bass & Treble Control on each Zone
• Talkover on Mic 1 to Assigned Zone

Product Description

Bearing the signature of a DJ legend, the Empath mixer combines the vision of Grandmaster Flash and Rane technology. Compact size, exceptional performance and advanced features set the Empath mixer apart. The Empath is the most able 3-channel, 10" format mixer available. The name implies: understanding, awareness and sensitivity to the needs of DJs.When traveling, finding power supply adapters is difficult. The Empath accepts 100 to 240 VAC, 50/60 Hz power, for use anywhere in the world without adapters.   Auto-Gain prevents performance-wrecking swings in program level when changing sources. The music is never too soft or clipped. FlexFX is a post-fader external stereo effects loop with individual Dry/Wet pan controls for Mic and Input Channels 1, 2 and 3.   Penny & Giles faders are simply the best money can buy. Smooth, accurate and reliable mixing is made possible by employing the most respected name in audio faders.   Two kinds of fader caps are provided for different mixing preferences: soft rubber caps for smooth mixing, and hard plastic caps for fast mixing.   Flash-Cue allows the DJ to rapidly select Crossfader A-Cue-sum or Crossfader B-Cue-sum with the flick of a switch, normally slow or complicated on other mixers.   Multiple Outputs. Nothing is more frustrating than arriving at a club and finding their jacks don't match. Systems may have XLR, TRS or RCA connectors. The Empath provides all three.   Low and High headphone ... ... Read more

Product Description

The PMX-05 has a DSP effects module with 25 effects, dry/wet control, and a wide range of parameters, for the ultimate in creativity. A bright blue backlit LCD display highlights the FX section, showing both the effect and parameter currently in use. The PMX-05 also has X-fader curve control, for easier scratch performance as well as X-fader reverse for more intricate turntable tricks. Features 4 line and 2 convertible phono/line RCA inputs, 3 band rotary EQ with cut feature on each channel, and a mic input with 2 band rotary EQ. Additionally, it has bright 2-color dual LED VU meters, a curved faceplate, and an attractive gun metal gray chassis fashioned to sit flush with virtually any DJ turntable. Features: 25 DSP EffectsDry/Wet controlCrossfader Curve controlRotary tempo controlPush button tempo on/off control with auto tempo LEDDual VU display with bright LED2 band rotary Mic EQ & volume controls3 band rotary EQ per channelRemovable face plate for user replaceable Rail Glide? cross faderErgonomically designed to be flush with turntableSmooth curved face plateRotary gain channel control4 line, 2 convertible phono/line RCA inputsDual ground screws for easy connectivity ... Read more

Product Description

Features: 8 channels of ADAT® optical digital audio input andoutput at 96kHz (4 channels at 192kHz). Up to 8 channels of TDIF digital audio input andoutput at 96kHz. Direct digital connection between Digital X Bus andexternal digital devices. Female 25-pin D-Sub connector (TDIF) and four TOSlink optical connectors(ADAT x 2). ... Read more

Product Description

Venice is Midas' first truly compact console built in direct response to customer demand.It does exactly what was asked in that it provides a high quality alternative in a huge number of applications where previously Midas was not an option.These range from smaller conference or live band applications, to effects returns or additional inputs in a large multi-console application, or indeed as part of a small complete mobile system.It also provides the perfect feature set for live acts who need to mix their own FOH and monitor sound from on-stage, and is compact and light enough to fit on even the most cramped performance area.As usual, Midas has paid attention to the details that set their consoles apart taking care to provide high quality mic preamps and a stable, responsive EQ section, just as they do on their larger consoles.The simple but intuitive outputs make the overall configuration of the console extremely quick and easy to use. ... Read more

Features

• Features and Specifications-Venice 320
• Inputs (total): 46
• Mono-Inputs (Mic/Line) with Inserts: 24
• Stereo-Line/Mono-Mic-Input Channels: 4/4
• Stereo-Effect-Returns (Line): 4

Product Description

The GigRac family of powered mixers for gigging bands and presentation systems has been joined by the most powerful version yet - the stereo GigRac 1000st, which delivers a massive 1000 watts output power (500 watts per channel into 4 ohms).The new family member has the same cool styling of the GigRac 300 and 600, but is a more powerful full stereo version, featuring expanded 3-band EQ on the inputs, two 7-band graphic equalisers and 10 high-quality preset digital effects. The 1000st is slightly higher than its brothers at 5U (8.75") but still this tiny package delivers awesome power and performance, with the ability to be slung over your shoulder.As with the GigRac 300 and 600 models, there are two outputs signal paths, one for the main front-of-house output and one for stage monitors. In normal stereo use, the two power amps deliver a full 500W of power (@ 4 ohms) to the Main (FOH) output, but the 1000st can be switched to provide 500 watts to the Main output and 500 watts to the Monitor outputs.Other additional features include pan controls for the inputs to the stereo bus, a stereo graphic EQ on the main output and a 7-band mono graphic EQ on the monitor output, 12-segment bar graph meters for both Main and Monitor outputs, a stereo playback input (for CD playback, for example) and a stereo submix input. In standby mode all channels are muted until the band is ready to play, while the playback input remains active for interval music. ... Read more

Product Description

Protect your Ultimate Support stands with this handy nylon bag. Stores 2 stands for easy transport. Fits the TS80 and TS90 stands. ... Read more

Product Description

The lightweight mixer cases are constructed of heavy duty EPS foam to give incredible protection during transportation. The exteriors are made from 600 denier nylon. The interior liner will adhere to Velcro for blocking in smaller mixers. An exterior pocket is perfect for cables and accessories. Deluxe shoulder strap and webbed handles make these cases easy to carry. ... Read more

Product Description

High Intensity lamp with BNC detachable gooseneck with a specially designed, heat-dispersing hood. Comes with base and dimmer dial. ... Read more

Product Description

Mackie designed the SR24?4 to be the best value 4-bus live sound mixers ever offered; yet they also knew that almost anyone who performs music live wants to record it, too. So they made sure that the SR Series mixers could do both well. The SR24?4 features major amounts of headroom, thanks to Mackie?s VLZ circuitry. They also have main and submix amplifiers that use Mackie?s distinctive negative gain mix architecture, which provides double the mix headroom of conventional designs. Ultra-quiet high-headroom mic preamps on 20 mono channels mean great-sounding vocals or instruments. Low cut filter (on mono channels) centered at 75Hz allows you to cut out mic thumps and wind noise that can enter your mix and rob you of amplifier power. Four buses make live mixing a breeze ? send all of your vocal mics to one bus, maybe your drum tracks to another ? by letting you control the overall level of those channels with one fader. The SR Series mixers have six aux sends per channel, with the flexibility to handle multiple chores at once. Two of the aux sends are pre-fader, so you can use them for monitor sends during a live session. Two other aux sends are post-fader, which you would want for effects during studio tracking and mixdown. But get this: the final two aux sends are switchable to pre- or post-fader! So you can have 4 pre-fader aux sends, or 4 post-fader aux sends, whenever you nee... ... Read more

Features

• High-headroom/low-noise mic preamps (20 on the SR24â¢4, 28 on the SR32â¢4)
• True 4-bus design
• Balanced stereo TRS & XLR main outputs; Balanced XLR mono output with level control
• 3-band EQ with sweepable mids (4-band fixed EQ on stereo channels)
• Low cut filter on all mono channels

Product Description

The Aphex Audio Level Interface is designed to allow use of -10dBV consumer hi-fi equipment with +4 or +8dBm professional and industrial audio systems.It provides an extremely clean, reliable two-way buffer so both systems can operate at maximum performance levels, matching impedances and operating levels. We are not exaggerating when we tell you that the Aphex 124 is going to make your recording life so much easier!PerformanceAphex products are well known for their audio performance. The 124 is no exception. Inputs and outputs are transformerless, for wide, flat frequency response and perfect square waves to preserve transients. Hum and noise rejection are very high while the noise and distortion are almost non-existent. The 124 is so clean it is a perfectly transparent interface for digital equipment. Two Way BufferingThe 124 is actively balanced and buffered in both directions, with very low output impedances. A more expensive type of balanced input circuit is used for even higher hum and noise rejection. In addition, all inputs and outputs are carefully filtered for freedom from RF interference.Some other devices are passive in one direction, simply using resistors to lower level from +4 to -10. The passive circuitry unbalances the input, eliminates all common-mode rejection allowing for hum and noise pickup, and presents a rather high impedance at the -10 output, permitting even more noise to enter the system ... Read more