Product Description

Black with plastic mic swivel retainer and brass insert. ... Read more

Product Description

Microphone Shock Mount ... Read more

Features

• Marshall Electronics MXL57 1006 Shockmount

Product Description

A 24-volt condenser mic will run perfectly on 48 volts. In fact, mics rated at as little as 9 volts can often operate on 48 volts, but you should check with the manufacturer first. Conversely, a mic will generally perform best driven by not less than its rated voltage so, for a 48-volt mic, you would obtain best results with 48 volts of phantom power. The Phantom III is a great choice for these needs. ... Read more

Product Description

For powering phantom powered microphones with either 12VDC or 48VDC. Since the units use a 100KHz switching power supply there is no audio noise generated. They have output pull down resistors so they will work with any mixer and have 2DC jacks so several units can use one adapter. Phantom voltage: 12V or 48V selectableJacks: Male and Female XLR 2: 5mm DC input jacksControl: 12/48 volt selector switchPower Input 14 - 18 VCD (included)Size: PB223: 6" x 2.5" x 1.25"Weight: PB223 - 1.5 lbs. (.68 Kg) ... Read more

Features

• Phantom voltage: 12V or 48V selectable
• Jacks: Male and Female XLR
• 2: 5mm DC input jacks
• Control: 12/48 volt selector switch
• Power Input 14 - 18 VCD (included)

Product Description

This rack mountable, 8-channel phantom power supply allows condenser mics to operate at their true potential. Features 48V output, and 8 balanced inputs/outputs. Occupies one rack space. ... Read more

Product Description

SM-1 Shock mount for Rode NT-1 and NT-2 microphones ... Read more

Features

• R0DE SM1 Shockmount for NT1/NT2

Product Description

The EA 1 is designed for the TLM 103, TLM 193, and M 147 Tube microphones. It has a swivel mount with a 5/8" female thread that can be fastened to tripods. Included is a threaded adapter to connect to 1/2" and 3/8" studs. ... Read more

Product Description

Shockmount for the SCM 900/910/920/1000 & TCM 1000 studio mics. ... Read more

Product Description

Microphone Shock Mount ... Read more

Features

• MXL MXL56 2001 Size Shockmount

Product Description

Transformerless Power/Output Module – The SE 300 B is used with all AKG Blue Line capsules and operates from 9 – 52 V phantom power. The 3-position switch allows selection of linear response, -10 dB preattenuation and 12-dB-per-octave 75 Hz low-cut filter. A stand adapter is included. ... Read more

Product Description

Microphone Shock Mount ... Read more

Features

• Marshall Electronics MXL57 1006 Shockmount

Product Description

Shockmount for the SCM 900/910/920/1000 & TCM 1000 studio mics. ... Read more

Product Description

This rack mountable, 8-channel phantom power supply allows condenser mics to operate at their true potential. Features 48V output, and 8 balanced inputs/outputs. Occupies one rack space. ... Read more