Product Description

Great mic cradle made in the Shure style, and fitting models 849, SM48, SM57, SM58, SM87A, SM94, Beta 57A, Beta 87, 515X, 545, 565, 588SDX, and BG1.1, 2.1, 3.1, 4.1, and 5.1. ... Read more

Product Description

Stand Adapter for straight-shaft microphones. ... Read more

Product Description

Black Stand Adapter for SM63, SM63L, SM63LB, SM81, VP64A, VP64AL, AMS26 and WA380 Half Wave Antenna.The A57F is the replacement for the discontinued A57D ... Read more

Product Description

Designed for use with the AT4050, AT4040, AT4033, AT4047 microphones. Attenuates noise, shock and vibration transmitted through mic stands, booms and mounts. Compatible with 5/8"-27 threaded stands. ... Read more

Product Description

The EA 87 is designed for the U 87 Ai microphone. It has a swivel mount with a 5/8"-27 female thread, plus a thread adapter to connect to 1/2" and 3/8" studs. ... Read more

Product Description

Clip for handheld microphones. ... Read more

Product Description

The CPSM shock-mount kit is a permanent mounting accessory providing shock isolation for the CP212 and CP218 podium microphones. The amount of isolation is substantial, in excess of 15 dB at 200 Hz (see Figure 1). The CPSM is also theft resistant after installation, with the microphone locked to the shock mount’s sleeve insert. Mounting a CP212 or CP218 to a podium, lectern or desk top is quick and easy using the CPSM shock-mount kit. The CPSM kit consists of a shock mount, template, set screw, hex-key wrench and three screws. It is designed for installation into panels up to 11/2 inches thick. ... Read more

Product Description

Stand clamp for KMS vocalist microphones. The clamp can be swivelled and has a 5/8"-27 thread, plus a thread adapter to connect to 1/2" and 3/8" stands. ... Read more

Product Description

These heavy-duty, flexible 5/8"-27 thread mic clips accommodate wireless mics with wider bodies. ... Read more

Product Description

The AT8647QM/S shock-mount plates effectively isolate mounted microphones from impact vibration and mechanical noise normally transmitted from the surface. They are intended for use with microphones mounted on lecterns, pulpits, conference tables and similar surfaces. Designed especially for UniPoint gooseneck microphones, they may be used with other lightweight microphones as well. This model incorporates a sturdy yet flexible suspension panel which provides the mechanical isolation. The AT8647QM/S accepts plug-in mics and features a phantom-powered mute switch with a lighted "on" indicator. AT8647QM/S with XLRF connector mount and lighted mute switch (48V phantom power required for operation). ... Read more

Product Description

Microphone clamp for AKG C1000 / D202. ... Read more

Product Description

This swivel clamp allows a second mic to be attached to any floor or desk stand with 5/8 in. or 7/8 in. tubing. ... Read more

Product Description

The D-FLEX is a gooseneck drum attachment for mounting Audix D-seriesinstrument & drum microphones to drums or amplifiers. The flexibility of its design allows for a variety of mounting positions and angles(dual pivot clip with extra wide claws). It will work with all other microphone clips using a 5/8" thread. ... Read more

Product Description

The auditorium hanger adjusts the tilting angle of a microphone suspended by its own cable.The MNV 21 consists of the tilting clamp, suitable to hold a Neumann miniature microphone or KMR 81, and a cable strain relief with a lock. ... Read more

Product Description

Designed to reduce the effects of low-end rumble and floor vibrations. 5/8" female threaded insert in a plastic base. 20mm opening for condenser mics. ... Read more

Product Description

The LP Mic Claw ensures solid placement of microphones on snare drums, toms, congas, and amplifiers. The Z-shaped 3/8"-diameter microphone rod allows for close or extended mic positioning. The improved rubber-lined jaw and mount isolates the mic from drum vibration and cross talk. ... Read more

Product Description

The Heil Sound SB-1 is a compact microphone boom that swivels and may be mounted on a desk. ... Read more

Features

• Very compact and useful for many radio applications.
• It's length is adjustable from 10" to 18" and accepts all standard 5/8" - 27" microphone clips.
• A very unique adjustable elevation clamp using a tooth and cog assembly assures the SB-1 to stay where you want it.
• It comes with a "C" clamp assembly that attaches the SB-1 to the edge of a desk, table or shelf.

Product Description

The new HEIL PL-2T is truly the finest professional microphone boom available today. Absolutely silent as it is moved. Perfectly balanced and stays exactly where it is placed. Using a system of perfectly balanced internal springs rather than the unsightly and mechanically unstable outboard springs used on booms of much lesser quality, the Heil PL-2 handles microphones up to 1.5 pounds in weight. It's 'TOPLESS" !!! That's right, you can remove the top and backs plate so that threading the mic cable inside the boom is easy. No more cable connectors to remove and replace! The Heil PL-2 features a hollow channel that the microphone cable can be fed through and provides the perfect cable maintenance. No more wire ties ! The Heil PL-2 is shipped with the standard `C¿ clamp mount that will accept an 1.5¿ thick table. An optional flush mount is available which screws to the top of a surface. The PL-2 accepts all of the industry standard 5/8¿ - 27 threaded mic clips or shock mounts. The chrome threaded stem can be locked into it¿s needed position depending upon the exact type of microphone or shock mount. ... Read more

Features

• Topless Design for easy threading of assembled microphone cable & connectors
• Handles microphones up to 1.5 pounds
• Smooth, noisless movement
• Industry standard 5/8" threading

Product Description

Microphone holder. Attaches microphones to sheet music stands or microphone stands up to 1" diameter. ... Read more

Product Description

The Heil Sound SM-1 Shock Mount Assembly can be used on all booms or stands. Professional shock mount is a unique design. The mic clip is suspended from 8 points using a neoprene elastic cord assembly, suspending the microphone from a direct mount, thus isolating the low frequency acoustical coupling to your desk. ... Read more

Features

• Isolates Microphone from Boom
• Suspended From 8 Points
• Can Be Used on All Booms And Stands
• Fits all Pensil and Vocal Type Microphones
• Neoprene Elastic Cord Assembly