Product Description

This extra-long telescoping boom has separate knobs for length and angle adjustment. Adjustable length: 19 to 32 inches. ... Read more

Product Description

Replacement power module. ... Read more

Product Description

The Shure Model UA845 is an amplified, UHF Antenna Distribution System designed to expand a wireless microphone system by splitting one pair of antennas to multiple Shure U4S, U4D or Shure UC4 wireless receivers. It also amplifies RF signals to compensate for insertion loss due to splitting signal power to mulitple output connectors. Each UA845 allows up to four receivers to use the same antennas. CASCADE connectors allows connections to a fifth receiver or a second UA845. There are also power connectors for powering Shure UHF and UC Wireless systems. ... Read more

Product Description

Musika by Ultimate Support tripod mic stand and boom combo. Height 36" to 63" Boom is 32" ... Read more

Product Description

6? Straight bar w/ 5/8?-27 threaded knobs for mounting standard mic clips, attachment bracket w/ tightening knob to attach to mic stand. ... Read more

Reviews (1)

Great guitar mic holder!
I bought this item after having a singer come to our church and use it as his guitar mic holder.You can screw this on to any standard mic stand as opposed to using another mic stand.I had a very hard time finding it in any of my catalogs, but here it is! ... Read more

Product Description

The A120S Accessory in-Line Switch can be used to add an On/OFF, Push-To-Talk, Cough Button, or Transmitter-Relay Keying function to a microphone or other device rated at up to 3 amps ac (0.5 Adc) 125V, non-inductive load. The switch has gold-plated contacts for reliable performance even in low-current circuits. The switch is a double-pole double-throw type for maximum versatility. Its pushbutton combines with a rotary knob to provide either spring-return momentary or locking action. The unit is supplied with a crimp-on strain relief for 6.4mm (0.25-in.) diameter cable and with a flex relief for either large or small diameter cables. The permanently attached belt clip can be rotated on the case to any of four positions for the most convenience in use. ... Read more

Product Description

The Shure Model UA844 is a UHF antenna distribution system that allows the expansion of wireless microphone systems by splitting one pair of antennas to multiple receivers. It also amplifies RF signals to compensate for insertion loss that results from splitting signal power to multiple outputs. A single UA844 system can support up to four wireless receivers. Multiple UA844 systems can be used in a tiered configuration until the maximum number of compatible frequencies is reached. ... Read more

Features

• Front-mounting antenna hardware
• Rack-mounting hardware
• External power supply
• Antenna cables for receiver connections
• DC power cables for receiver connections

Product Description

Save BIG when you buy today! ... Read more

Product Description

ONE-HAND STANDNew!Die-cast Curve One-Hand Height Adjustment.Super cool clutch lets you adjust height with a quick squeeze to easily raise or lower the mic.Heavy-Duty Finish.Rust resistant, automotive quality coating is extremely durable.NEW!Die-cast Flash Base.Squeeze the Flash Base lever to quickly open the legs in one easy "umbrella style" motion.  Release to lock the legs in place both in the open and closed position. There has never been a faster set-up. Rubber footcaps won't fall off.  ... Read more

Product Description

Combines the output from two microphones into one channel. The balance control attenuates each microphone by 6 dB (typical) at midpoint. ... Read more

Product Description

Universal Hard Carrying Case- For Shure 1/2 rack wireless systems. ... Read more

Product Description

Locking foam windscreen for Beta 57 and Beta 57A microphones. ... Read more

Product Description

NEW! One-Hand Height Adjustment.Simply squeeze the square, polycarbonate clutch to easily adjust mic height with just one hand.NEW! Heavy Triangular Base.Sleek, triangular, cast-iron base is very stable and sturdy.Heavy-Duty Finish.Rust resistant, automotive quality coating is extremely durable. ... Read more

Product Description

This boom attachment swivel fits any 5/8 in. diameter tubing. ... Read more

Product Description

The Shure Model WA380 Half-Wave Antenna for the LX2, LX4 and SC4 receivers provides up to 3 dB more gain than the standard quarter-wave antennas supplied with Shure wireless microphone receivers. When remotely locating an antenna away from the receiver, the WA380 Half-Wave Antenna must be used instead of the standard quarter-wave antenna.The WA380 Antenna Kit consists of the following items: Half-Wave Antenna (multi-section, telescoping), Right Angle Adapter, Mounting Bracket, and Straight Adapter with hexagonal nuts. ... Read more

Product Description

This versatile box is built with our premium TRSP-2 transformer for optimum durability. Features a phase reverse switch which flips the polarity of Input #2. • Use fewer input channels by combining two miclines into one. • Combine two mics - one with polarity reversed - toremove background noise and feedback. • Combine and correct phase when using a pair ofmics above and below a drum or in front and rear of an open backed guitar amp. Specifications • Input Impedance: 150 ohms x 2 • Output Impedance: 150 ohms • Operating Level: -50dBu to -10dBu • Frequency Response: 20Hz-20kHz +/-1dB ... Read more

Product Description

This mounts onto any surface with 3 included wood screws. Accepts standard 5/8" threaded mic clips or goosenecks. ... Read more

Product Description

The industry standard on stage and in the studio, the round base stand is a musician's staple around the world. This Quick Release version features a push-button clutch for fast 2-handed operation. Professional quality die-cast zinc clutch. ... Read more

Product Description

The Ultimate in convenience, the MC40 features a boom adjustment that allows front-to-back, side-to-side and up-ad-down adjustment with just one knob. Locking legs round out this excellent value. ... Read more

Product Description

This accessory pop filter grille increases the versatility of the Shure Model SM81 Unidirectional condenser microphone. It attenuates distracting breath-noise (such as pops and tics from B's, P's and T's) and allows the SM81 to be used as a handheld vocal microphone. By minimizing pickup of rushing and rumbling wind noise, the A81G also allows the SM81 to be used outdoors in windy conditions. The A81G is ruggedly constructed with a grille that resists damage and deformation. It fastens securely to the SM81 and can be used when the microphone is handheld or stand mounted. ... Read more