Product Description

Designed from the ground up as a state-of-the-art keyboard amp, the KBR-3D features 200W of power (100 per side, plus 40W above 800Hz to the rotary horn), a 12AX7 pre-amped PRO-3T rotating horn simulator circuit, and super-fast 10" drivers in a tuned port cab with a computer-designed angular front that assures a lush, wide image. ... Read more

Features

• Stereo Hi-Fidelity and 3D channels with global, bass, mid and treble
• Real rotating horn with fast, slow and stop functions
• Stereo low rotor simulator with rotor volume, bass and effect level controls
• STEREO MICROPHONES ON HORN WITH MIXER LEVEL CONTROLS TO XLR OUTPUTS!
• Left/right XLR line outputs send all channels and horn mixer

Product Description

The PRO-145 provides real dual rotor professional level sound quality and features in a very portable and rugged single cabinet amplifier. Virtually all parameters are easily adjustable allowing tuning of the PRO-145 to your unique sound. The PRO-145 provides the lush 360 degree sound experience unique to dual rotor speakers and amplifiers. When combined with a classic tone wheel Organ or new digital tone wheel Organ the total incredible classic sound is re-created with modern technology. ... Read more

Features

• 12AX7 pre amp with 20% auto bias
• Two inputs, Pre and Post 12AX7 gain controls
• Contour allows bass or treble cut before 12AX7
• Auto tube bias adjustable trim varies tube overdrive harmonics
• Bass, mid, treble, variable point high freq

Product Description

This durable amp has two input jacks so players can run a variety of keyboards together. It also has full 4-band EQ controls specialized for bass/treble keyboard tones. It even has a push-button mid notch filter to cancel out problematic frequencies. With a scorching 100 watts in their arsenal, players will love the versatility and power this keyboard amp has to offer. ... Read more

Features

• 100 Watts RMS
• 12" Woofer
• 6" Tweeter with Piezo Driver
• 4-Band EQ
• Mid Notch Filter

Product Description

The PRO-145 provides real dual rotor 'professional level' sound quality and features in a very portable and rugged single cabinet rotary Organ amplifier. ... Read more

Product Description

3-Channel Keyboard Amplifier w/12 inch Woofer ... Read more

Features

• Power @ min
• impedance (Watts) 100
• 3-channel operation
• Channel 1 optimized for microphones with an XLR and a 1/4" input
• Channel 2 optimized for line level and keyboard sources with 2 phone jack inputs and 2 RCA inputs

Product Description

2-channel operation with channel 1 optimized for microphones with an XLR and a 1/4" input, and channel 2 optimized for line level and keyboard sources with 2 phone jack inputs and 2 RCA inputs. 50W of power. 10" woofer and a 3.75" tweeter. Effects send and return. Combo-style cabinet made of 7-ply poplar plywood with internal bracing. Blue/black carpet exterior with plastic corners. ... Read more

Features

• 2 channel operation
• Channel 1 optimized for microphones with an XLR and a 1/4" input
• Channel 2 optimized for line level and keyboard sources with 2 phone jack inputs and 2 RCA inputs
• 50W of power
• 10" woofer and a 3.75" tweeter

Product Description

Plenty of power to give you great stage volume for your keyboard and just loud enough to be used as a mini-PA. It features 150W power, 4 channels, one 12" Eminence speaker, a tweeter, and an XLR mic jack on channel one with phantom power on/off switch. Channels 1, 2, and 3 have their own volume controls with left and right input jacks. Channel 4 has volume control, left and right jacks, aux left and right jacks, and a 6- or 8-channel mix selector. There is also a headphone jack, 7-band graphic EQ, a line out with volume control and mute button, main level control with mute button. External right amp source and return jacks, an 8-channel expander jack, and stereo channel line out. ... Read more

Features

• 150W power
• One 12" Eminence speaker
• One tweeter
• XLR microphone input jack
• Phantom power on/off switch

Product Description

A little extra loudness makes this amp great for low-volume band rehersals and personal practice. A 3-band EQ and a separate input and volume control for each channel give you some flexibility. ... Read more

Features

• 30W
• 10" speaker
• Tweeter
• 3-band EQ
• 2 channels with separate input jacks

Product Description

The KP-100S like it's big brother KP-200S delivers 3D stereo sound in a compact package.The unique angle cabinet design provides wide sound dispersion and when coupled with the spatial expander provides true stereo image. ... Read more

Features

• 100 watts RMS, 50 watts per channel
• 2 x 8" 100 watt Eminence speakers
• 2 x 3.5" Ferro cooled dynamic horns
• Spatial Expander
• One channel with 2 pairs of 1/4" inputs

Product Description

The KP-200S provides true stereo amplification for Keyboards, sound modules, and all quality sound sources in a modern rugged single cabinet design.Modern keyboards, samplers and synthesizers are carefully designed to produce stereo sound. When mixed to mono, these sounds are often compromised and muted. The KP-200S unique angled cabinet front in conjunction with our proprietary 3D-expander circuitry provides a wide stereo field that retains location cues from the sound source. The adjustable expanders spread the stereo sound field beyond the confines of the cabinet reproducing the full sonic capability of your Keyboard(s) and sound sources in true STEREO. ... Read more

Features

• Two channels, each with volume, expand, bass, Middle and Treble controls
• Two 1/4 in. pairs (left and right) inputs per channel
• The KP-200S accepts up to four stereo sound sources
• Two 3D expanders, one per channel
• The expanders spread the natural separation of your stereo sound source beyond the confines of the KP-200S cabinet

Product Description

The SE32 is a PA cabinet that has a focused sound field. This helps control feedback when vocal microphones are being used. Itâs also great as a DJ speaker that projects high level sound out to the audience. It has full seamless midrange thanks to its new crossover and speaker, and tight bass and clear highs for Hi-Fi sound quality. The total weight or the LiteBox cabinet is just 36.5 pounds, which makes it really easy to put them up on stands. (Stand sockets are standard.) The exclusive new fan cooling system allows continuous high-level output without risking damage to the amplifiers, and is so quiet you have to put your ear right up to the speaker to even tell itâs running. The SE32 is available with our Pro-Combo preamp for use with instruments, or with a single channel XLR balanced input for use with a mixer. Stage Cabinets have wide dispersion bullet tweeters. PA Systems have controlled dispersion long throw horns. ... Read more

Features

• Active, Bi-amplified Two-Way System
• Full Range, Active PA Cabinet
• 450 Watts
• 15 inch, 50 Oz. Magnet
• Global 3-Band EQ, Master Fader, Effect Loop, XLR Output

Product Description

Keyboard Amplifier ... Read more

Features

• Power @ min
• impedance (Watts) 100
• Minimum Impedance (Ohms) 4
• Burst Power - 2 cycle 115 Watts
• Speaker Configuration - LF (Size / Power) 12 inch / 100 Watts

Product Description

It gives you 200W to drive a 15" woofer and horn tweeter. The mixer section provides 4 channels with input options to cover about anything you want to plug in (RCA, XLR, and TRS jacks for balanced or unbalanced signals). 2-band EQ is provided on channels 1 and 2. It also has effects send and return (1/4" jacks), line out (XLR and 1/4"), headphone jack, and a back-panel extension speaker jack. A built-in limiter prevents clipping and allows clear playing at high output levels. All this is housed in a compact, road-ready cab made of 7-ply plywood, internally braced and carpet covered. ... Read more

Features

• 200W of power
• 15" woofer and RCF N252P horn tweeter
• 4 channel operation
• Channel 1 has an XLR and TRS phone jack
• Channel 2 has an XLR and TRS phone jack

Product Description

Virtually all parameters are easily adjustable allowing tuning of the PRO145 to your unique sound. The PRO145 provides the lush ?360? degree sound experience unique to dual rotor speakers and amplifiers. When combined with a classic ?tone wheel? Organ or new digital ?tone wheel? Organ, that incredible classic sound is re-created with modern technology.12AX7 symmetrical circuit pre amp.Two 1/4? TRS balanced inputs, Pre 12AX7 gain and post 12AX7 volume controls.12AX7 variable resistive, inductive plate load control provides a wide palette of overdrive harmonics.Auto tube bias trim for fine tuning tube operation.Bass, mid, treble, high frequency cut and horn volume controls.Subwoofer 1/4? line output <100 Hz, volumeDirect 1/4? output for non rotary sound.Bi-amped 200 watts RMS @ 800 Hz, 70 watts horn, 130 watts low rotor.12? 200 watt Eminence low rotor speaker, 80 watt horn driver with proprietary MS 1.2 diaphragm.Three built -in microphones, two on horn one on low rotor.Three XLR microphone outputs on rear.Fast/Slow/Stop LED footswitch.Front panel trim adjustment of acceleration, deceleration, fast and slow speeds of horn and low rotor.Caster sockets and caster set.Quiet zero maintenance DC motors and ball bearing horn and low rotor supports.Rugged Polymaric finish.Designed and built in the USA. Dimensions and Weight: H 24.5? W 20? D 17? / 65 lbs. ... Read more

Product Description

A 12AX7 pre-amped rotary horn speaker and low rotor simulator provide classic sound for organ. A Hi-Fi channel gives clean, full-range amplification for piano and synthesizer, while a monitor channel allows line out on/off so vocal feeds can be amplified. ... Read more

Features

• Hi-Fidelity channel with volume, bass and treble controls
• Monitor channel with volume, bass, treble controls and line out on/off
• Rotary channel with pre and post 12AX7 gain, contour, rotor balance and bass controls
• Rotating horn speed control with slow and stop functions
• XLR line output sends all channels and horn

Product Description

Add the Stationary Unit to the Rotary Unit and you've got the Leslie sound at its biggest and fattest. This powered unit outputs 150W for the bass and 50W for the horn. Speakers include a 12" woofer and horn tweeter. Volume, master volume, plus bass and treble tone controls. Connections include XLR with phantom power and 1/4" mic/line inputs, insert (send/return), plus line out and remote power input. ... Read more

Features

• 150W bass power
• 50W horn power
• 12" woofer
• Horn tweeter
• XLR (with phantom power) and 1/4" inputs

Product Description

The KT-80 provides a Hi-fidelity input channel for clean transparent amplification of piano and synth, and a versatile 12AX7 real tube channel to add warmth and overdrive to organ and electric piano! A third input switches your sound from Hi-fidelity to 12AX7 tube on demand using an optional foot pedal. The KT-80 is a true dual sound amplifier designed specifically for keyboards.Features: Clean Hi-fidelity Channel. Warm 12AX7 Tube Channel. Unique Pre and Post Tube EQ. Switchable Input Channel. XLR Microphone Input. Separate EQ on Hi-Fi, and Tube Channels. XLR Line Output. 12" High Efficiency Speaker. 3.5" x 3.5" Dynamic High. Frequency Horn. 80 Watt RMS Power Amplifier. ... Read more

Product Description

Designed from the ground up as a state of the art keyboard amp, the KBR-3D features 200 watts of power and a 12AX7 pre-amped rotating horn. You no longer have to settle for a sterile amp designed as a monitor while your guitar playin' buddy runs through his own unique tower of power designed specifically for his use. This full-featured unit from Motion Sound delivers Real Character and Real Rotating Sound that you can control and modify to your individual style.Features: A True Twin Amp- Connect multiple keyboards as well as mixing boards. Normal and Enhanced Stereo. A stand alone Real Rotating Horn Channel. Clean, Loud, and Powerful. The first in a new generation of amplifiers designed specifically for keybaords. Now you can develop your own distinctive amplified sound! ... Read more