Amazon.com Product Description

The Koss VC-20 volume control can be used with any music player. Itsgold connector will connect to most headphone jacks. A convenient pocket or beltclip lets you position the VC-20 where it's most comfortable for you. ... Read more

Features

• Lifetime warranty
• Includes pocket/belt clip for convenient positioning
• Can be used with any portable music device
• Connects to any 0.125-inch headphone jack
• Gold minijack plug

Reviews (4)

Convenient, but...
It's definately a nice item to have... at first. I got mine so that I could use it with my computer, and be able to change the sound level without going through menus and unplug the headphones easily without having to crawl behing the computer, so that I could use them with my stereo. It worked great for about 3 months, however, it's wearing out - the headphone port has broken loose in the casing, and I have to fidget with itfor a minute to get the plug all the way in (otherwise, sound only comes out one side). Due to the way it's constructed, the dial for the volume will keep it from getting any worse, so I'll still be able to use it, but it sure is annoying when I'm trying to move between things.

Nice, very useful
I use this on my computer. Yeah, there's software volume controls - but they require dropping out of whatever you're doing to set, and differ from program to program. It's far more convenient to be able to reach over and make a little adjustment without effecting what you're working on. Also, the sound quality isn't effected - I used to plug my headphones into a set of speakers to do the same thing, but it resulted in static and noise that degraded the music; this volume control retains the clarity of the music.

Very functional
This is a surprisingly useful gadget, as it serves as an extension cord and volume control. The extension cord aspect adds about 3 feet to your headphone, which gives me a lot more room to move when I am listening to music on my computer. The volume control is handy when using a portable player because you can change the volume without jostling the player.

Cool
It is nice to have a volume control off of the cd player so when its in its case i can change the volume. ... Read more

Product Description

Danelectro introduces eStudio™. Think of it as a creative "launching pad." Work out the chords to that "chart topping" new song. Experiment with new tone colorings. Practice for your world tour at 2am without those annoying threats from the landlord. The Electronic Studio You Carry in Your Pocket.. ... Read more

Product Description

The PM50s is a unique device for monitoring ones self and program material at the same time. It has a monitor level control and a mic level control, mic pass through XLR jacks, two headphone output jacks, and a 1/4" monitor input jack. Possible users may be drummers who need to hear a click track, choir singers who need to hear themselves, etc. The power adapter is included.Specifications: * S/N Ratio: 90 dB *Gain 20 dB 1/4", 50 dB XLR * Frequency Response: 50 - 20K Hz * Net weight: 1 lb.Dimensions: 3" W x 2.5" D x 1.25" H.1-year manufacturer’s limited warranty.Made in the U.S.A. ... Read more

Features

• Power adaptor included
• Monitor level control
• Mic level control
• Mic pass through XLR jacks
• 2 headphone output jacks

Product Description

The HR-6 is a compact six-channel, five-pot remote mixer that clamps to any mic stand. When used with the HDS-6, the HR-6 allows musicians to customize their own headphone or monitor mix, and the engineer doesn't have to touch the board. The HR-6 provides four mono pots and one stereo pot. The four mono pots allow each user to create a custom mix of four console channels or busses. The stereo pot will most often be used for a main control room mix, or for a stereo effects return. The HR-6 also provides a "Submixes Included/Excluded" button, which mutes the four mono pots, allowing only the stereo source to be heard, without having to alter the HR-6's four monaural settings. USED WITH HDS-6. ... Read more

Features

• HR-6 remote mixer provides each musician five volume controls: four monaural (for mixer channels or busses), plus one for stereo mix or stereo effects mix
• HDS-6 to HR-6 linking cables are included with the units
• Input Connectors: RJ-45 jacks, Output Connectors: 1/4" stereo headphone jack
• Dimensions: 2.5" H x 6.75"W x 3.5"

Product Description

The HA204 2x4 Is A Handy Stereo Headphone/Earphone Amplifier Designed To Amplify and Distribute A Stereo Line Level Audio Signal To Four Sets Of Headphones Or Earphones. It Is The Perfect Addition To Expand The Single Output Of Laptop Computers, Portable Game Units, Portable CD/MP3 Players, Portable DVD Units, and More. The Blue Tinted, Clear Plastic Packaging Makes The HA204 An Attractive Addition To Any Mobile Setup. ... Read more

Features

• Stereo 1/8" (3.5mm) Input
• Four Stereo 1/8" (3.5mm) Outputs with Level controls
• Operates on a single 9V battery, or optional AC adapter(Not Included)
• Comes with a single 1/8" to 1/8" adapter cable, and a stereo RCA to 1/8" adapter cable

Product Description

This headphone amp offers built-in compression, volume control, auxiliary stereo input/output, and the choice of clean or altered channels. ... Read more

Product Description

Most home recordings involve from one to four people, any or all of whom are going to need headphone monitoring. The monitor amp would be connected to the tape deck's headphone output or a mixer output so that the performers can hear themselves and each other. Of course the same application can apply to band rehearsals and even home entertainment. HeadAMP provides amplification and individual volume control for up to 4 headsets. It can be driven by either line-level or headphone amplifier signals (mono or stereo) ... Read more

Features

• Output Connectors: Four stereo 1/4? headphone outputs
• Power Requirements: 12V DC (Adapter included)
• Dimensions: 4.5" x 2.875" x 1.5"

Product Description

Problem : A performer needs to hear him/herself through headphones exclusively or mixed with the output of a mixer, CD player, tape deck , or other stereo line level source. Only the mic signal, however, should be going to the main mixer.Solution : Connect MyMONITOR between the mic and line source, and the mixer. The Mic and line Monitor levels can then be adjusted for mix and volume through the headphones. Only the mic signal will go to the board. And since MyMONITOR can be AC or battery powered , the unit can be used on a large stage or wherever there is no AC outlet nearby. Dynamic or condenser mics can be used since phantom power would come through the Mic Thru jack from the mixer or other source ... Read more

Features

• Can be AC or battery powered
• Dynamic or condenser mics can be used
• Dual headphone jacks

Product Description

The Boostaroo headphone bundle pack comes with the long time favorite 12" cord Boostaroo, and a really great set of UpBeat Audio's own 32 Ohm headphones. The headphones delivery great sound and clarity, and also come with in-line volume control. So get the most out of your favorite movie or music with the Boostaroo Headphone bundle pack and get the best boom for your buck. ... Read more

Features

• Boost the volume by 100% on any audio source that uses a standard headphone jack
• Allows you to share your player with up to 3 people with no loss of sound quality
• Saves money by doubling the battery life of most portable audio players
• No sound distortion
• In-line Volume Controlled Headphones

Product Description

With the introduction of the Powerplay PRO-XL HA4700, Behringer announces the successor of the popular HA4600 headphone amplifier distribution systems. The HA4700 offers four high-power amplifiers that can now drive loads down to 8 Ohms and offers improved sound performance and comprehensive new signal routing and mixing functions, which no other headphone amplifier can match ... Read more

Features

• multi-purpose headphones amplifier system
• High sonic quality

Product Description

The HA43 is for expanding or generating headphone channels. It has a 1/4" stereo input, 4 volume controls, 4: 1/4" stereo output jacks and is powered by an AC adapter (included). The HA43 has a 20Hz - 20K Hz response, small size, and is very easy to use. Input Impedance: 100K Ohms unbalancedMax Input Level: +14 dBVInput Connectors: Stereo 1/4" TRS phoneOutputs: (4) 1/4" Stereo 1/4"Max Gain: 20 dB/Channel90 dBTHD: <.008%IMD (SMPTE) <.008%Weight: 1 lbs (.45Kg)Size: 3" x 4" x 1.25" (8 x 10 x 3.2 cm) ... Read more

Features

• Input Impedance: 100K Ohms unbalanced
• Max Input Level: +14 dBV
• Input Connectors: Stereo 1/4" TRS phone
• Outputs: (4) 1/4" Stereo 1/4"
• Max Gain: 20 dB/Channel

Product Description

After years of relying on other equipment to drive Grado headphones, you can now listen and enjoy headphones through our new Grado Reference Headphone Amp, the RA1. Designed for state-of-the-art performance and specifically to play Grados, the new RA1 will allow you to hear your headphones like never before. ... Read more

Product Description

Input source select switches and phone and line 1/4 TRS stereo outputs on each channel4 independent stereo input sections separate volume controlShielded internal dual regulated power supplyEasily expandable19 W x 1 3/4 H x 8 1/2 DShipping package dimensions: 3.5x10x22 (len x wid x dep) ... Read more

Features

• Input source select switches and phone and line 1/4" TRS stereo outputs on each channel
• 4 independent stereo input sections, separate volume control
• Shielded internal dual regulated power supply
• Easily expandable

Product Description

When used together, the HDS-6 Headphone Distribution Unit and the HR-6 Remote Mixer (sold separately) offer a great-sounding, cost effective and flexible way to provide custom mixes for up to sixteen people in recording and live sound environments. The combination of unique functions add unprecedented functionality and convenience to any multiple-user audio application. Linking the distribution unit and remote mixers is as easy as plugging in cables. Multiple HR-6's are simply daisy-chained together. A pair of 25 foot linking cables is included with each HR-6. Up to eight HR-6 remote mixers can be linked to an HDS-6, and two pairs of headphones may be plugged into each HR-6. The HDS-6 rackmount distribution unit connects to the mixer/console to provide interface and power supplies to drive a group of HR-6 remote mixers. Trimpots are provided on the HDS-6's front panel to match the console output levels to the HDS-6's inputs. The HDS-6 is ideal as a low distortion headphone driver for the most critical listening situations. In addition to providing high current differential buffered signals, it also provides power and ground to the HR-6 remote mixers. The HR-6 is a compact six-channel, five-pot remote mixer that clamps to any mic stand. When used with the HDS-6, the HR-6 allows musicians to customize their own headphone or monitor mix, and the engineer doesn't have to touch the board. The HR-6 provides four mono pots and one stereo pot. The four mono pots allow each... ... Read more

Features

• Input Connectors: 1/4" phone, balanced or unbalanced. Output Connectors: RJ-45 jacks
• HDS-6 / HR-6 Connecting Cable: 2 each: 10Base-T UTP Ethernet computer cables, Cat. 3 or better (included with HR6).
• HDS-6 provides gain trims and overload LEDs for each input, ground lift and on/off switch, and system status LEDs
• Dimensions: 1.75" H x 19" W x 7.25" D

Product Description

This headphone amp offers built-in compression, volume control, auxiliary stereo input/output, and the choice of clean or altered channels. ... Read more

Product Description

The ROLLS RA62b is a six-channel headphone/earphone amplifier for professional audio monitoring. It is intended for recording studios, sound reinforcement, and audiophile listening environments where full frequency response signal(s) are to be distributed to up to six individuals. A variety of input options are available including 1/4", RCA, and balanced XLR. Since the MONO/STEREO switch is after the pan control, it will mix 2 MONO signals and their balance can be adjusted with the Pan control. Up to six individual monitor mixes may be listened to via the rear panel insert jacks. The RA62b features a FR4 double sided circuit board, socketed integrated circuits, and painted steel chassis. 1-year manufacturer's limited warranty.Made in the U.S.A. ... Read more

Features

• (6) 1/4" Headphone & (6) 1/8" (3.5mm) Earphone Outputs per channel with Level Controls
• 1/4" and 1/8" Outputs may be used simultaneously
• 1/4", RCA and XLR Inputs
• 6 TRS Stereo Insert jacks for separate use of each channel
• Up to 600 mW output per jack - it's loud

Product Description

HR-4 4-channel headphone amplifier ... Read more

Features

• Each channel has its own balanced input that can be fed with individual mixer subgroups, such as drums, background vocals or keyboards, aux sends or individual mixer channels
• The musicians can adjust their own levels and switch back to the main mix at any time
• Features both front and rear inputs for each channel, individual front panel volume controls, master input level control, and a built-in power supply

Product Description

A basic Hear Back system consists of a Hub and personal Mixers connected using standard CAT5E cables. A single Hub supplies signal and power to a maximum of eight Mixers. That's one for you and everybody in the band. If that's not enough, the Hubs can be daisy-chained using the HearBus In and Out for virtually unlimited system size. The Hear Back Hub can accept analog input signals from audio mixers, auxiliary, matrix, monitor, and/or direct outputs.The ADAT input can come from digital audio workstations, digital recorders, or digital mixers. For front of house or remotely located digital mixers, we also have the Extreme Extender ADAT In/Out that converts ADAT optical, which has very limited distance, to the HearBus for transmission of up to 500 feet. Shipping weight: 2.05 lbs. ... Read more

Product Description

Q-Mix HM6 6 channel headphone Q amp ... Read more

Features

• Simplifies complex IFB and mix-minus setups in the studio or on remotes
• Also has an effects loop with six individual stereo returns
• Its robust 160mW output can drive most headphones to high SPLs
• Built-in power supply
• Long-life sealed rotary controls

Product Description

The Rane HC 6 is one of the most indispensable products in today's audio industry. Featuring six stereo headphone amplifiers, the HC 6 performs a number of necessary tasks, not all of which are headphone related. The HC 6 provides Master stereo 1/4" TRS Inputs which can drive any or all of the 6 stereo headphone amplifiers. A Mono switch is provided on the front panel to drive both channels of all six amplifiers from a common mono source. Six individual unbalanced stereo Inputs are available to drive any individual amplifier from a separate stereo source. These Inputs can be converted to mono balanced Inputs through internal jumpers if required.Outputs for all six channels are provided on the front panel and on the rear panel so that headphones may be connected on either side based on the requirements of a given installation. Two pairs of headphones may be driven from each channel, one pair connected to the front and one to the rear. The HC 6 is capable of delivering up to 450 milliwatts per channel into headphones with rated impedances between 32-600 ohms. The precise amount of power depends on the exact impedance of the headphone in use and the number of headphones connected to the unit. Under most conditions, the HC 6 produces sound pressure levels in excess of 120 dB. This level is above the threshold of pain and is suitable for most listeners. ... Read more

Features

• Outputs for all six channels are provided on the front panel and on the rear panel so that headphones may be connected on either side based on the requirements of a given installation
• Two pairs of headphones may be driven from each channel, one pair connected to the front and one to the rear
• The HC 6 is capable of delivering up to 450 milliwatts per channel into headphones with rated impedances between 32-600 ohms
• The precise amount of power depends on the exact impedance of the headphone in use and the number of headphones connected to the unit
• Under most conditions, the HC 6 produces sound pressure levels in excess of 120 dB