Product Description

Sometimes floor monitors are a problem. There isn't enough room for them onstage or someone sits in and cant hear the monitors or the drummer cant hear them well enough. Or perhaps its a pick-up gig or a rehearsal and you didn't have enough time to set them up. In any case, sometimes it would be preferable just to put on headphones and somehow connect them to the PA. That's where a headphone tap comes in. This is a passive device with an input to connect the PA or monitor amplifier and an output to connect the headphones. A volume control regulates the headphone level and internal resistors keep the units impedance high enough to protect the headphones. It also protects the amplifier from encountering too low a load impedance while powering tap units, the speaker system or several tap units by themselves ... Read more

Features

• Passive operation
• Connects to PA or monitor amplifier
• Volume control regulates headphone output Internal resistors protect the phones
• Protects the amplifier low impedance loads
• Connects to headphone amps to provide extra monitoring capability in studios

Product Description

The Rane HC 6 is one of the most indispensable products in today's audio industry. Featuring six stereo headphone amplifiers, the HC 6 performs a number of necessary tasks, not all of which are headphone related. The HC 6 provides Master stereo 1/4" TRS Inputs which can drive any or all of the 6 stereo headphone amplifiers. A Mono switch is provided on the front panel to drive both channels of all six amplifiers from a common mono source. Six individual unbalanced stereo Inputs are available to drive any individual amplifier from a separate stereo source. These Inputs can be converted to mono balanced Inputs through internal jumpers if required.Outputs for all six channels are provided on the front panel and on the rear panel so that headphones may be connected on either side based on the requirements of a given installation. Two pairs of headphones may be driven from each channel, one pair connected to the front and one to the rear. The HC 6 is capable of delivering up to 450 milliwatts per channel into headphones with rated impedances between 32-600 ohms. The precise amount of power depends on the exact impedance of the headphone in use and the number of headphones connected to the unit. Under most conditions, the HC 6 produces sound pressure levels in excess of 120 dB. This level is above the threshold of pain and is suitable for most listeners. ... Read more

Features

• Outputs for all six channels are provided on the front panel and on the rear panel so that headphones may be connected on either side based on the requirements of a given installation
• Two pairs of headphones may be driven from each channel, one pair connected to the front and one to the rear
• The HC 6 is capable of delivering up to 450 milliwatts per channel into headphones with rated impedances between 32-600 ohms
• The precise amount of power depends on the exact impedance of the headphone in use and the number of headphones connected to the unit
• Under most conditions, the HC 6 produces sound pressure levels in excess of 120 dB

Product Description

The PM350 mixes three signals; a 1/4" stereo or mono line level, an XLR mic, and 1/4" unbalanced instrument level signal together to 1/4" headphone and 1/8" earphone outputs. All signals have individual level controls. The line input is switchable from stereo to mono via jumper on the side of the unit. The mic input has a hardwired pass through, and the instrument input connects to a balancing transformer and is output via an XLR jack. ... Read more

Features

• Includes 500 sleeves (250 pairs)
• Pack of universal-fit replacement foam sleeves for Shure sound-isolating earphones
• Disposable sleeves compress to fit gently in the ear
• Once in place, foam expands to form tight seal
• Compatible with Shure E1c, E3c, and E5c earphones

Product Description

Ensure the quality sound of your E1c, E3c or E5c sound isolating earphones by replacing the flex sleeves every now and then. This bag consists of 10 large reusable flex sleeves (5 pair), which fit comfortably in the ear and allow for ease of insertion. ... Read more

Features

• Includes 10 sleeves (5 pairs)
• Pack of large replacement flexible sleeves for Shure E1c, E3c, and E5c sound-isolating earphones
• Reusable sleeves fit comfortably in the ear
• Easy to insert and remove
• Large size designed for people with sizable ear canals

Product Description

The PM50sOB Is Designed For Performers Needing To Monitor Their Own Signal, Such As Their Vocal, With The Main Mix. Popular With Drummers Needing To Mix A Click With A Monitor Signal. Church Choir Singers Love The PM50sOB To Monitor Their Voices Over The Musicians. (Battery Operated) ... Read more

Features

• PM50 SPECIFICATIONS
• Input -20 dB max XLR 1K bal,
• 20 dB monitor
• Output (2) 1/4" 8 ohm or greater
• Gain 20 dB 1/4", 50 dB XLR

Product Description

Add extra comfort to your listening experience with these replacement ultra-soft flex sleeves (large size). They fit right on your Shure E1c, E3c or E5c sound isolating earphones, fit comfortably in your ear and are easy to insert. ... Read more

Features

• Includes 10 sleeves (5 pairs)
• Pack of large replacement flexible sleeves for Shure E1c, E3c, and E5c sound-isolating earphones
• Ultra-soft reusable sleeves fit comfortably in the ear
• Easy to insert and remove
• Large size designed for people with sizable ear canals

Product Description

Ensure the quality sound of your E2c sound isolating earphones by replacing the flex sleeves every now and then. This bag consists of 10 large reusable flex sleeves (5 pair), which fit comfortably in the ear and allow for ease of insertion. ... Read more

Features

• Includes 10 sleeves (5 pairs)
• Pack of large replacement flexible sleeves for Shure E2c sound-isolating earphones
• Reusable sleeves fit comfortably in the ear
• Easy to insert and remove
• Large size designed for people with sizable ear canals

Product Description

The Whirlwind PA-1 is a high output, low distortion, portable monitoring device suitable for critical listening in any professional audio environment. The PA-1 accepts either balanced or unbalanced stereo, line level signals through parallel XLR and 1/4" TRS inputs. A switch changes the input connector configuration from separate balanced inputs to combination unbalanced (Tip/Pin2 = Left, Ring/Pin3 = Right) for accepting signals from sources such as headphone jack outputs. Powered by two 9 volt batteries that load into easy access drawers or with external AC power supply (included). Applications: • Headphone distribution systems • Sign language interpretation or language translation (The superior sound quality will reduce ear fatigue when working over extended periods of time) • Adding headphone monitoring to any piece of audio equipment • Boosting weak headphone output in high SPL environments ... Read more

Amazon.com Product Description

If your portable audio player uses headphones or mini-speakers, you'll want to check out the Boostaroo Revolution R234-2 High Definition Amplifier and Splitter. This small, pocket-sized can increase the volume of your audio player by up to 40 percent. The Boostaroo Revolution is a great and economical way to increase the volume of your own portable player through your headphones or mini-speakers, or share your music with up to two additional listeners. Best of all, the Boostaroo Revolution can take all three headphones at once without any noticeable difference in output or frequency response. This means that everyone will have access to the same high-performance music without any loss of quality. And at only three ounces, the Boostaroo Revolution is certain to become your companion wherever your music takes you. ... Read more

Features

• Boost the volume by 400% from any portable audio source
• Drives high end headphones up to 200 ohms
• Built in 3-channel surround sound feature
• Allows Mp3 decompression for a fuller and richer sound
• No sound distortion

Product Description

The FP22 provides two 1/4" and two mini headphone feeds from any type of audio input, and has the ability to mix a mono line or mic signal with a stereo line level signal. Loop-through connections allow the original signal to pass through unaffected. Powered by a single 9-volt battery or external 12-24vdc. ... Read more

Product Description

Cable extender adapter for Furman's HRM-CABL. ... Read more