Product Description

4 heavy-magnet 10" speakers hammer out a highly articulate, loud and punchy bass sound. Built with the same interlocking corners and high-quality hardware as G-K's high-end RBS enclosures. 23"W x 27-1/2"H x 18"D. 93 lbs. ... Read more

Features

• Super-tight tone
• Perfect for Backline heads
• 4 heavy-magnet 10" speakers
• Interlocking corners
• High-quality hardware

Product Description

One 15" speaker pumps out a punchy, highly articulate bass sound. Road-tough construction keeps the 115BLX working hard, night after night. ... Read more

Product Description

2 heavy-magnet 10" speakers hammer out a highly articulate, loud, and punchy bass sound. Built with the same interlocking corners and high-quality hardware as G-K's high-end RBS enclosures. Use alone or as half a stack. 23"W x 15.75"H x 18"D. 46 lbs. ... Read more

Features

• Super-tight tone
• Perfect for Backline heads
• 2 heavy-magnet 10" speakers
• Interlocking corners
• High-quality hardware

Product Description

So, you want to own a Gallien-Krueger, but think they are out of reach? Think again. The Backline Series was designed with you in mind. ... Read more

Product Description

800W, 8 ohm, 4x10" Rock bass cabinet with horn ... Read more

Features

• IMPEDANCE: 8 ohms or 4 ohms.
• POWER RATING: 800 Watts
• WOOFER: 4xGK-Paragon 10B200-32 Cast Frame, 10", 200W, 32 or 16 ohms High Presence Voice Coil.
• TWEETER: GK-Paragon 5H50-8.
• FREQUENCY RESPONSE: 50Hz to 19kHz + 5dB.

Product Description

This super-compact Eden cab houses 2 x 10" cast frame speakers and a cast bell horn tweeter. It handles up to 250W RMS power. 23"W x 17-1/2"H x 18-1/2"D. 60 lbs. ... Read more

Product Description

The Eden CX210 is the perfect size for those smaller venues. 2 - 10" speakers deliver a smooth, sweet response over a very wide area. Great for all styles of music! ... Read more

Product Description

Housed in specially designed aluminum cabinets, they are a little over a foot high and wide, weigh only 12 lbs with a 12" speakers. They're also tone monsters. ... Read more

Features

• 12 lbs.
• Aluminum chassis
• Steel grille
• 100W speaker
• Optional MB Mic Kit lets you mount the 112MBX on your mic stand for greater projection

Product Description

A perfect match for the 700RB, 1001RB or 2001RB the 400 watt, 8 ohm cabinet features a heavy-duty cast-frame 15" woofer, custom-designed high-frequency horn, carpet covered, tuned and ported AA Grade Birch construction, 16 gauge steel grille, custom-tooled corners for protection and stability and nickel-plated castors for added mobility.The unique design allows you the option to play the cabinet upright, stacked horizontally or rocked back for use as a stage monitor.The flexible crossover system with HF level control offers passive full range or true bi-amp operation at the flick of a switch. Speakon and 1/4" connections are provided, as well as power-absorption protection circuitry.Weight is 72 lbs. and dimensions are 23"W x 27.5"H x 18"D. ... Read more

Features

• 8 ohms
• 400 watts
• 1xGK-Paragon 15B400-8 cast-frame, 15" woofer with 8-ohm high-presence voice coil
• GK-Paragon 4H50-8 horn
• Switchable biamp/full range

Product Description

The Classic Series SBX cabinets are designed as more affordable cabinets for extension use with the 400RB-IV and 800RB heads. An added benefit of the 410SBX cabinet is that it alone, in the SBX Series, pairs-up perfectly with the 700RB-II. Bi-amp two 410SBX cabinets to your 700RB-II and you are set. These cabinets feature the same sturdy construction, high-quality hardware, cross-over system, and interlocking corner system, as the RBH enclosures. These cabinets can be used as stand-alone units or combined into monster stacks. 410SBX (400W)IMPEDANCE: 8 OhmsPOWER RATING: 400WWOOFER: 4xGK-Paragon 10B100-32, Stamped Frame, 10?, 100W, 32 Ohms High Presence Voice Coil.TWEETER: GK-Paragon 5H50-8.FREQUENCY RESPONSE: 50Hz to 19kHz + 5dB.SENSITIVITY: 100dBCROSSOVER: Switch (Bi-Amp/Full-Range), Horn Power Limiter, & L-Pad High Frequency Attenuator.lCONNECTORS: 1xSpeakonTM Style Bi-Amp, 1x1/4? Full Range.CONSTRUCTION: Heavily Braced Cabinet, 16 Gauge Steel Grill, Black Carpet Covering, Nickel PlatedCasters, & Custom Tooled Interlocking Corner System.WEIGHT: 93 lb.DIMENSIONS: 23?W x 23?H x 18?D ... Read more

Features

• IMPEDANCE: 8 ohms . .
• POWER RATING:400 Watts
• WOOFER:4xGK-Paragon 10B100-32, Stamped Frame, 10", 100W 32ohm High Presence Voice Coil.
• FREQUENCY RESPONSE:50Hz to 19kHz + 5dB.
• SENSITIVITY:100dB.

Product Description

Gets a tight, punchy sound. It operates at eight or 4 ohms, handles up to 800W, and is loaded with 4 GK-Paragon cast-frame 10" speakers and a GK-Paragon HF horn. Switchable between full-range or biamp operation. Heavy-duty construction features an all-birch cabinet with black carpet covering, 16-gauge steel grille, nickel-plated casters, and a custom-tooled interlocking corner system. 23"W x 27.5"H x 18"D. 92 lbs. ... Read more

Features

• Eight- or four-ohm operation
• 800W handling
• Four 10" cast-frame speakers and a GK-Paragon HF horn
• Switchable between full-range or biamp operation
• Features all-birch cabinet construction

Product Description

Careful attention to driver design as well as optimum enclosure parameters ensure that the XC115 will reproduce every note with equal projection. Tweeter with L-pad control makes it the perfect single box solution. Use it alone or with an XC210 or XC410 for extra thump. 15" driver with piezo tweeter. 300W program handling. 8 ohms. ... Read more

Features

• Single 15" speaker
• Piezo tweeter
• 300W handling
• Cab impedance: 8 ohms
• 23"W x 23"H x 15"D

Product Description

The Neo series feature Neodymium speakers, a clear, natural bass tone and rugged construction.The Neo112 features a single 12" speaker capable of handling 300 Watts at 8 Ohms. ... Read more

Product Description

From the 7-ply, void-free Phillipine mahogany construction to the 4 - 10" cast-frame woofers, this cabinet was designed to produce amazing sound. A phenolic tweeter with integral phase plug handles the higher frequencies and the custom crossover has a variable tweeter control so you can dial your sound in with ease. One Neutrik Speakon and 2 - 1/4" inputs. Casters included. ... Read more

Features

• 4 - 10" cast-frame woofers with 56 oz. magnets
• 700W handling
• Phenolic tweeter with integral phase plug
• Custom crossover with variable tweeter control
• One Neutrik Speakon and 2 - 1/4" inputs

Product Description

Designed to go under the BM400H head. 15" 200W speaker with unparalleled efficiency. Delivers a deep bass foundation. 300W program. 8-ohm impedance. Ideal extension cab for XM200/XM200T. 21"W x 18"H x 15"D. 48 lbs. ... Read more

Features

• Extension cab ideal for the XM200/XM200T
• 15" bass driver
• 300W cabinet program handling
• 60Hz -3.5kHz frequency response
• 21"W x 18"H x 15"D

Product Description

Enclosure tuning and deep-excursion speakers deliver a deeper, bigger punch. To ensure definition, a rugged tweeter is included. An L-pad on the horn allows you to dial in the precise amount of presence you want. 4 x 10" speakers. Tweeter. 500W program handling. 22-1/2"W x 22-1/2"H x 15-1/4"D. 81 lbs. ... Read more

Features

• 4 x 10" speakers
• Rugged tweeter with L-pad
• 500W program handling
• 8 ohms impedance
• 22-1/2"W x 22-1/2"H x 15-1/4"D

Product Description

2 - 12" cast frame woofers with 56 oz. magnets handle up to 600W and give you a solid, defined deep bass. A phenolic tweeter with integral phase plug lets you dial in just the right amount of edge. Neutric Speakon and 1/4" inputs. Recessed handles. Interlocking corners. 24"H x 22-1/2"W x 16-5/8"D. Includes removable casters. ... Read more

Features

• 2 - 12" cast frame woofers with 56 oz. magnets
• Power handling: 600 watts
• Impedance: available in 4 or 8 ohms
• Phenolic tweeter with integral phase plug
• Custom crossover with variable tweeter control

Product Description

The Neo series feature Neodymium speakers, a clear, natural bass tone and rugged construction. The Neo115 features a single 15" speaker capable of handling 300 Watts at 8 Ohm. ... Read more

Product Description

Considered by the pros to be the best 2 x 10 enclosure available. It features Eden's exclusive EC-1060XL Cast Frame woofers and an adjustable E-2700 Cast Bell tweeter to deliver a tight, deep, focused sound that outdoes many 4 x 10 designs. 23"W x 19.5"H x 18.5"D. 63 lbs. ... Read more

Product Description

For those players who need a portable, high performance rig, David Eden has designed a new 2 x 10 cabinet for their latest XST woofers. This 2 x 10 cabinet handles more power than many 4 x 10 cabs on the market. The low end is full but tight, the mids are open and well defined and the highs are clear and crisp.Handles 450 watts RMS at 8 ohms. ... Read more