Product Description

Fullerton Semi Hollow ... Read more

Product Description

Based on the '64 ES-175 that was Steve's first good guitar and the one to which he has returned throughout his long career, this stunning signature model features everything he loves best: maple top, back, and sides, split-parallelogram mother-of-pearl inlays on a rosewood fretboard, full body and neck binding, inlaid ebony bridge base, unique nickel T-trapeze, and 2 '57 Classic humbuckers. Independent volume and tone controls with a 3-way toggle. Deep, rich tone rings out from a full hollowbody with a deep cutaway for easy high-fret access. ... Read more

Features

• Maple top, back, and sides
• Split parallelogram MOP inlays on a rosewood fretboard
• Full body and neck binding
• Inlaid ebony bridge base
• Unique nickel T-trapeze

Product Description

The Elite series are instruments that approach custom shop perfection. Crafted with premium woods, fitted with American pickups and circuitry--even American-made toggle switches and Grover tuners--they're made at a special factory devoted to their manufacture where they receive a high degree of hands-on luthier attention. You'll find the Elite 1963 Dot true to the original, beautifully made, a sweet-sounding and easy-playing instrument that beautifully bridges the gap between Epiphone and Gibson. Includes hardshell case. ... Read more

Features

• 5-ply maple back, sides, and top
• One-piece mahogany neck
• 24-3/4" scale
• Neck set at the 19th fret
• Rosewood fretboard

Product Description

John Lee liked the Sheraton so much that he bought both, the '64 Sheraton and Sheraton II. The difference between the 2 axes was the Frequensator tailpiece on the former and the Stopbar on the latter. Both of these exceptional instruments are true to the mid '60s specs and carry the following features: 5-layer bound pickguard with metal E, original block and triangle mother-of-pearl inlays, 2 gold-plated Gibson "New York" mini-humbuckers, gold hardware, and nitrocellulose lacquer finish. Each comes stamped with John Lee's original number and has a hand-numbered series label inside. ... Read more

Features

• 5-layer bound pickguard with metal Epiphone E logo
• Original block and triangle mother-of-pearl inlays
• 2 gold-plated Gibson New York mini-humbuckers,
• Gold hardware
• Nitrocellulose lacquer finish

Product Description

Based on the ES-137 Classic, this is the first Gibson archtop to employ a mahogany center block for reduced feedback and greater sustain. Other features are all Gibson deluxe: laminated curly maple body, binding on top and bottom, bound fingerboard, bound peghead, ebony fingerboard, split-diamond overlay headstock, pearloid split-diamond fingerboard inlays, 6-way Varitone switch that filters tone from fat to thin, and '57 Classic pickups (the original Gibson humbuckers from 1957). The magnets and 42-gauge enamel-coated wire are from the original suppliers and the pickups are built by Gibson on the original machinery. ... Read more

Features

• Laminated curly maple body
• Maple neck
• Mahogany center block to reduce feedback and add sustain
• Multiple bound body on top, single bound on back
• Bound fingerboard and peghead

Product Description

The "Royale" RL1 Thin Line Style Electric Guitar Is Designed To Combine The Resonant Warmth Of An Acoustic With The Performance Characteristics Of A Solid Body. Features A Maple Bolt On Neck Design, Bound Arch Top, Rosewood Fingerboard, Dual Humbucking Pickups, and GROVER (Tm) Tuning Gears. ... Read more

Features

• All SAMICK Guitars & Basses Are Sold With A Limited lifetime Warranty, and Every Instrument Is Inspected & Serviced Before Shipment To The Dealer.

Product Description

Select spruce top, laminated maple body, 3-piece maple neck, and a distinctive trapeze tailpiece that compensates for string length. This 25-1/2"-scale beauty also includes an OBL floating mini-humbucker; body, neck, and head binding; rosewood fingerboard with wedge block abalone inlay; and gold hardware. ... Read more

Features

• Laminated select spruce top
• Laminated maple sides and back
• 3-piece maple neck
• Distinctive trapeze tailpiece
• Floating OBL mini humbucker

Product Description

Features include a laminated maple neck and body; solid rosewood bridge; gold tuners and tailpiece; multiple bound body, neck, and peghead. Joe Pass signature on bound simulated tortoiseshell pickguard. Limited lifetime warranty. ... Read more

Features

• Laminated maple neck and body
• Solid rosewood bridge
• Gold tuners and tailpiece
• Multiple bound body, neck, and peghead
• Joe Pass signature reproduced on bound simulated tortoiseshell pickguard

Product Description

Based on the ES-137 Classic, this is the first Gibson archtop to employ a mahogany center block for reduced feedback and greater sustain. Other features are all Gibson deluxe: laminated curly maple body, binding on top and bottom, bound fingerboard, bound peghead, ebony fingerboard, split-diamond overlay headstock, pearloid split-diamond fingerboard inlays, 6-way Varitone switch that filters tone from fat to thin, and '57 Classic pickups (the original Gibson humbuckers from 1957). The magnets and 42-gauge enamel-coated wire are from the original suppliers and the pickups are built by Gibson on the original machinery. ... Read more

Features

• Laminated curly maple body
• Maple neck
• Mahogany center block to reduce feedback and add sustain
• Multiple bound body on top, single bound on back
• Bound fingerboard and peghead

Product Description

The ES-175 debuted in 1949. With a comfortable body size and stylish pointed cutaway, it quickly became the most popular guitar of the jazz world. The transparent finishes (sunburst with gold hardware or antique natural with nickel) on a laminated maple body always remind you that you're touching wood. Binding on the top, back, and fretboard, combined with a trapeze tailpiece and parallelogram fretboard inlays, provides a big touch of class. Traditional Gibson design and 2 '57 Classic humbuckers dish out huge helpings of tone. Includes hardshell case. ... Read more

Features

• Laminated maple body
• Rosewood fretboard with parallelogram inlays
• Top, back, and fretboard binding
• ABR bridge and trapeze tailpiece
• Two '57 Classic humbucker pickups

Product Description

The Elite series are instruments that approach custom shop perfection. Crafted with premium woods, fitted with American pickups and circuitry--even American-made toggle switches and Grover tuners--they're made at a special factory devoted to their manufacture where they receive a high degree of hands-on luthier attention. You'll find the Elite 1963 Dot true to the original, beautifully made, a sweet-sounding and easy-playing instrument that beautifully bridges the gap between Epiphone and Gibson. Includes hardshell case. ... Read more

Features

• 5-ply maple back, sides, and top
• One-piece mahogany neck
• 24-3/4" scale
• Neck set at the 19th fret
• Rosewood fretboard

Product Description

The Epiphone Dot Arch Top Guitar features 2 humbuckers and chrome hardware. The scale is 24.75 in. and the nut width is 1.68 in. It has a set neck joint and Maple neck material. The fingerboard is Rosewood/Dot and the body material is made of laminated Maple. Ebony finish. ... Read more

Features

• Semi-hollowbody
• Dual humbuckers with 3-way pickup selector
• 22-fret rosewood fretboard
• 2 volume and 2 tone controls

Product Description

A powerful mix of Hamer master craftsmanship and semi-hollowbody tone and resonance. The Monaco III is the perfect fit for the player who wants a superior single-cutaway. The hand-carved solid spruce top is matched to a semi-hollow Honduran mahogany body for sweet, dense tone with strong presence. The bound and set mahogany neck is 25-1/2 inch scale length with a dovetail neck joint, rosewood fingerboard, and Victory mother-of-pearl inlays. Powered by Seymour Duncan P-90 pickups, the Monaco III also features a 5-way chicken head rotary pickup selector, tune-o-matic bridge, and tremolicious Bigsby vibrato. ... Read more

Features

• Semi-hollow Honduran mahogany body and neck
• Hand-carved, arched spruce top
• Rosewood fretboard Mother-of-pearl Victory fingerboard inlays
• Dovetail neck joint
• INCLUDES Hard Shell Case

Product Description

A single-cutaway, thinline semi-hollowbody. ... Read more

Product Description

The Epiphone Dot Arch Top Guitar features 2 humbuckers and chrome hardware. The scale is 24.75 in. and the nut width is 1.68 in. It has a set neck joint and Maple neck material. The fingerboard is Rosewood/Dot and the body material is made of laminated Maple. Ebony finish. ... Read more

Features

• Semi-hollowbody
• Dual humbuckers with 3-way pickup selector
• 22-fret rosewood fretboard
• 2 volume and 2 tone controls

Product Description

Featuring a "Made in the USA" by Kramer "90R" Neck Pickup and "98T" Bridge Pickup for "Made to Rock Hard" tone that won't quit! Combine these USA pickups with 1-Master Volume, 1-Bridge Volume, 1-Neck Volume and 1-Master Tone with Push/Pull coil tapping and you've got an arsenal of sounds and control at your fingertips! Exclusive Kramer Small-Body semi-hollow design with solid-mahogany center block and hollow wings for great sustain with rich, warm overtones! Laminated Flame Maple Top with Mahogany back and sides for great looks with excellent weight and balance. Black hardware featuring a tune-o-matic bridge for precise and easy intonation, stopbar tailpiece for great sustain and Gotoh SG machine heads for precise tuning and stability. One-Piece Mahogany Neck and Rosewood fingerboard with Mother-of-Pearl Kramer "Diamond" Inlays. ... Read more

Features

• Set-Neck Construction
• Kramer USA Pickups (90R and 90T)
• Master Volume and Tone Controls and 3 way Toggle Switch
• Tune-O-Matic Bridge with Stopbar Tailpiece
• 14 Degree Headstock Angle

Product Description

Classic semi-hollowbody design and dual '57 Gibson humbuckers combine to produce everything from full-bodied growls to singing sustain. Also features a thin tapered 1960s neck and rosewood fingerboard (24-3/4" scale), body/neck binding, nickel-plated hardware with Grover heads, tune-o-matic bridge with stopbar tailpiece, separate volume and tone controls, and a 3-way switch. ... Read more

Features

• Classic semi-hollowbody design
• Dual '57 Gibson humbuckers
• Thin tapered '60s neck
• Rosewood fingerboard
• Nickel hardware

Product Description

A solid spruce carved top and AAA flamed maple back and sides plus precision craftsmanship and USA humbuckers result in sumptuous tone while 24K gold-plated hardware, an ebony fretboard, and a gorgeous flaming-chalice headstock inlay lend otherworldly looks. Easy-play 23-1/2" scale and thinline body. ... Read more

Features

• Solid spruce arched top
• Ebony fingerboard
• AAA flamed maple back and sides
• 5-piece maple/rosewood set neck
• 50SR USA humbucker at the neck

Product Description

A single-cutaway, thinline with a fully hollow body. This model is identical to the model above, but without a center block. This guitar is louder acoustically, with an 'airier' sound when amplified. ... Read more

Product Description

Based on the ES-137 Classic, this is the first Gibson archtop to employ a mahogany center block for reduced feedback and greater sustain. Other features are all Gibson deluxe: laminated curly maple body, binding on top and bottom, bound fingerboard, bound peghead, ebony fingerboard, split-diamond overlay headstock, pearloid split-diamond fingerboard inlays, 6-way Varitone switch that filters tone from fat to thin, and '57 Classic pickups (the original Gibson humbuckers from 1957). The magnets and 42-gauge enamel-coated wire are from the original suppliers and the pickups are built by Gibson on the original machinery. ... Read more

Features

• Laminated curly maple body
• Maple neck
• Mahogany center block to reduce feedback and add sustain
• Multiple bound body on top, single bound on back
• Bound fingerboard and peghead