Product Description

Vented at top and bottom, the Slim 5 removable side panels are equipped with recessed lift handles and their own internal locking clips.Made from 18-gauge steel and finished in a durable black textured power coat, each side panel adds 5/8" per side to the cabinets overall width.Sold in pairs. For use with Slim 5 model 5-21. ... Read more

Product Description

Penn Fabrication...Supplying The Music Industry Since 1974. This "rack ear" rack mounting bracket is constructed of .059"/1.5mm black powder coated steel.Dimensions: 3.5" H (2U) x 5.5" L.Mfg. #R1206/2U.Sold individually. ... Read more

Product Description

Now you can have fader start on a 10" battle style mixer. Plus you even have rubber knobs for better control, perfect for competition / "no slip" mixing. Compact, lightweight, durable - it's the QMX2BPM! Features: Auto BPM Display Bass, Mid, & Treble Kill Switches. Cuts output 100% when all switches are engaged. X-Y Assignable Channels with Back Lit buttons VCA Fader Control Balanced and Unbalanced Master Outs Gain on each channel Treble,Mid, and Bass on each channel Booth out control Selectable Crossfader curve 3 Phono,4 lines and 3 mics. XLR 1/4 combo mic connector Rubber knobs for better control Light Control output Optical detecting Q-Start Control Master PFL Switch 2 Phono Outputs 1 on Front panel and 1 on Top Face Talk Over PRO Split Cue New Feather Fader plus for smoother and Faster Fades X-Y Assignable Channels with Back Lit buttons VCA Fader Control Balanced and Unbalanced Master Outs Gain on each channel Treble,Mid, and Bass on each channel Booth out control Selectable Crossfader curve 3 Phono,4 lines and 3 mics. XLR 1/4 combo mic connector Rubber knobs for better control Light Control output Optical detecting Q-Start Control Master PFL Switch 2 Phono Outputs 1 on Front panel and 1 on Top Face SPECIFICATIONS: Output: greater than 18dBv (10V) Signal to noise ratio: Line/Aux:> -63dBv, Mic: > -54dBv Channel EQ: -30dB to +20dB Bass, Mid, Treb. Frequency Range: 20Hz - 20KHz ±1dB Distort ... Read more

Features

• Auto BPM displays
• Bass, mid, treble kill switches
• X-Y assignable channels
• VCA fader control
• Balanced and unbalanced output

Product Description

Heavy duty storage drawers feature full extension ball bearing slides that extend 14".Flush slam latch keeps drawer closed.Inside dimension: 15-7/8" wide x 14" deep.3 and 4 space drawers also available with factory installed keylocks.Finished in black textured powdercoat. ... Read more

Product Description

These rack mount lockboxes provide secure storage at a reasonable price.Includes latch and standard keylock for security.Available in 3 and 4 space sizes with standard keylocks.Made from 16 gauge (.063") steel.Finished in durable black powdercoat.8-1/2" depth. ... Read more

Product Description

Features: High Quality Sound Design and Durability The DJM-909 boasts the highest quality in sound and design that exceed today's battle / performance mixers offering powerful club sound in a battle mixer. This was accomplished with sensitive yet solid gripping EQ knobs, durable transform switches, and precise and accurate cross fader curve control. Most importantly, Pioneer has developed an original "non-contact" cross fader technology with unprecedented durability and reliability. The Cross Fader and Faders The most important feature on any battle mixer is its cross fader and fader performance. Pioneer's DJM-909 introduce the most precise and customizable cross fader in the industry to date. The cross fader is highly durable and has double fade control allowing each half of the cross fader the ability to be adjusted independently! All fader curves can also be seen and adjusted with visual reference on the mixers' fader curve adjust screen. If that isn't enough, the cross fader feel can also be adjusted to your preference (a breakthrough functionality). Each channel fader curve can be adjusted from a smooth volume change to a dynamic volume ON/OFF at the TIP of the channel faders (bottom or top). In turntablist slang, you will be able to crab-scratch the channel faders from either the top end or bottom end of the fader. Fader Start Sync Both mixers can connect with Pioneer's CDJ series to employ the fader start capability. The user can autom ... Read more

Features

• 2 Channels
• 4 Line Inputs
• 2 Turntable Inputs
• 2 Switchable Phono/Line Inputs
• 2 Fader Start Inputs

Product Description

Black nylon shoulder washers prevent ground loops when used with the standard flat washers provided with screws. ... Read more

Product Description

The HW series rack screws are 3/4" long with #10-32 threads and feature an attractive Phillips trim-head for those who prefer the older classic style screw.All screws include factory-installed captive-cup nylon washers for convenience and are heat-treated for strength and resistance to head stripping. 500 Pc. Packaged in a reusable plastic storage jar.Black oxide finish. ... Read more

Product Description

The perfect addition to any scratch mixer! Cross fader reverse switch box for the scratching DJ. Plug turntables directly into the Hamster Cage and with a flick of a switch, change crossfades from channel 1 to channel 2 and from channel 2 to channel 1 (1/2 to 2/1). RCA phono line in and out. Dimensions are 5.5" L x 3" W x 1.75" H / 140mm x 76mm x 45mm and weight is .75lbs. / .31 kg. ... Read more

Product Description

The 405 is designed to remotely adjust the volume of multiple amplifiers or powered speakers, either individually or in groups. The input of the 405 is connected to a PA mixer’s line-level output (the 405 will accept the output of two mixers) and the power amps and/or powered speakers are connected to the 405’s zone outputs. ... Read more

Features

• Routes and controls program from multiple sources to up to five destinations
• Left and right sets of balanced source 1 & 2 inputs can also accept a mono signal source
• Source 1 & 2 input channels are internally routed to the five zone channels
• Each zone channel features source 1 & 2 level controls and balanced L/R outputs
• Stereo/mono selector button on each zone

Product Description

The PD Series is a comprehensive vertical power strip line stocked in 11 pre-configured strips in 3 different sizes - available and ready to ship.Featuring multiple circuit, amperage, and termination choices, stock PD Series strips can satisfy many power requirements right off the shelf.Included with all vertical power strips is their proprietary "quick-clip" mounting providing fast and secure mounting.Once the quick-clips are fastened to the inside of your rack, the power strip is hung in place via a series of mounting lances found along its sides.These handy lances also double as cable tie points allowing all AC cables to be neatly managed.For mounting PD strips in the AXS, Slim 5 or to the rear rackrail of any rack, the optional PB-5A bracket is offered.All strips are constructed from 16-gauge steel and are finished in a durable black powder coat, and all are UL listed in the US and Canada. Specifications: Mfg. #PD-1215C · Circuit: 15 A · Termination: 3' flex conduit w/8" tails · Protection: None · Fits racks Coded: L · # of Outlets: 12 · Length: 57". ... Read more

Product Description

User configurable, rack panel features 16 laser cut knockouts.Remove only the knockouts you need.Will accommodate XLRs, Neutrik 2-pole and 4-pole Speakon®, FP, MP, MDL, and FDL type connectors.Made of 16 gauge (.063") steel, flanged for strength.Finished in black powdercoat.Takes up one rack space.Net weight:3/4 lb. ... Read more

Product Description

Affordable and compact, the Q-Spand is the perfect solution for mobile DJs and who want to produce bigtime sound without the expense or inconvenience of king-size speakers. Not only will the Q-Spand greatly amplify the volume produced by a small 2-speaker audio system, this amazing multi-directional mixer will make it sound as though additional speakers have been placed throughout the room. ... Read more

Features

• Three phono, four line, three aux, and three mic ins
• Fader 'Q" Start
• WOW Sonic Enhancer
• Feather fader plus cross fader
• Balanced XLR outs

Product Description

These rack mount lockboxes provide secure storage at a reasonable price.Includes latch and standard keylock for security.Available in 3 and 4 space sizes with standard keylocks.Made from 16 gauge (.063") steel.Finished in durable black powdercoat.8-1/2" depth. ... Read more

Product Description

Eliminate the prospect of any tampering with these tough security covers.Features fine perforation for clearer viewing of dials and LEDs plus increased security.Also fitted with rubber edging to protect equipment finishes.For use with standard 19" racks. ... Read more

Product Description

The economical and effective way to manage cable horizontally. Model LBP-1A features a formed "L" shape, generous cable tie slots and a special coating to protect cable.For use with standard 19" racks.All lacer bars are sold in packs of 10. ... Read more

Product Description

Finally the wait is over! For almost a decade, professional DJs have been waiting for a quality Rotary Mixer. Well, I guess if you yell loud enough and long enough, someone will listen. Rane proudly presents the MP 2016 Rotary Mixer. ... Read more

Features

• Six Stereo Input Buses
• Four Dedicated Stereo Phono/Line Pre-amps
• Two Dedicated Mic/Line Pre-amps with: Gain Trim - Two Band Tone Control Engage Switch - Booth Ducking
• Five stereo Auxiliary Inputs
• Input Gain Controls for Level Matching

Product Description

Proudly display, organize, and protect your expensive equipment with this sloped top rack.Features 5/8" thick, furniture grade MDF board covered with attractive black laminate, pre-installed 11 gauge threaded rack rails, pre-installed castors, 16 vertical spaces on bottom, and 12 spaces on slope.Easy to assemble, includes decorative screw caps, allen key, driver kit, and hardware.Bottom is 16" deep.54-3/16" overall height.Shipped flat.Net weight:45 lbs. ... Read more

Product Description

Heavy duty storage drawers feature full extension ball bearing slides that extend 14".Flush slam latch keeps drawer closed.Inside dimension: 15-7/8" wide x 14" deep.3 and 4 space drawers also available with factory installed keylocks.Finished in black textured powdercoat. ... Read more

Product Description

Eliminate the prospect of any tampering with these tough security covers.Features fine perforation for clearer viewing of dials and LEDs plus increased security.Also fitted with rubber edging to protect equipment finishes.For use with standard 19" racks. ... Read more