Product Description

Heavy duty storage drawers feature full extension ball bearing slides that extend 14".Flush slam latch keeps drawer closed.Inside dimension: 15-7/8" wide x 14" deep.3 and 4 space drawers also available with factory installed keylocks.Finished in black textured powdercoat. ... Read more

Product Description

Penn Fabrication...Supplying The Music Industry Since 1974. This low profile sliding tray with universal equipment fixing points is a great alternative to standard rack shelves.Features fully adjustable front and rear racking ears to compensate for mounting in racks ranging from 14-1/2" to 22" deep and ball bearing sliders.Occupies one rack space (1U).Shelf depth: 15".Shelf extends 10-1/4".Constructed of .047"/1.2mm steel.Mfg. #R1290/1U. ... Read more

Product Description

This compact, one-space unit is equipped with 8 rear outlets and a single front outlet.All outlets are grounded, rated for 15 amps and all are protected against EMI, spikes and surges.A generous 8-3/4" depth offers easy access to the rear outlets.An illuminated combination power switch/circuit breaker is located on the front panel.Finished in black powdercoat.Net weight: 5 lbs. ... Read more

Features

• UL Listed (file # E204950)
• 8 Circuit-Breaker Protected Rear Outlets (NEMA 5-15R)
• 1 Front Convenience Outlet (NEMA 5-15R)
• 15 Amp Circuit Breaker Located On Front Panel (Master Switch)
• Illuminated Power Switch

Product Description

Xone:V6 is an echo of the earliest days of pro audio, when idealistic individuals created outstanding products free from cost or time constraints. Such creations were never cheap. Nor did they sell in their thousands. But they did become landmark design classics. ... Read more

Features

• Allen and Heath's mission for Xone:V6 was simply to build the highest quality club mixer ever
• Allen and Heath painstakingly refined our signal paths to optimise audio transparency
• Hundreds of the best quality components were evaluated and of these only the very finest were approved for the project
• The result is a mixer that gives great recordings the space and freedom to express their full warmth and clarity

Features

• Independent Zone & Booth outputs w/ switchable L.E.D.
• The ideal nightclub and mobile mixer - has 3 phono, 9 line, and 3 mic inputs. Gain control with clip L.E.D. on every channel
• Dual 7-band Master EQ w/ on-off switch, Mic inputs 1 & 2 feature 2-band EQ w/ talkover
• Fader-start feature to control Stanton CD players
• Cue section features PFL, Cue pan, Stereo/Split controls and dual headphone outputs for tag-team mixing

Product Description

The X-15 offers eight stereo inputs (2 phono, 6 line), while the more flexible X-17 provides four switchable phono/line inputs as well as four dedicated line inputs. Both mixers have two mic inputs, balanced XLR and unbalanced RCA master outputs and 3-band EQ on each channel. You'll also get a set of pro features like fader start on all four channels, dedicated booth and record outputs and a replaceable crossfader. Plus, the X-15 and X-17 are intended to easily fit into a compact mobile DJ system, with standard 19" 4U rackmount enclosures. ... Read more

Features

• Tascam's X-15 is similar to the X-17 but with a few less features

Product Description

"Hamburger Grill" Style guard for 4-1/2" fans. ... Read more

Product Description

Penn Fabrication...Supplying The Music Industry Since 1974. Keep your gear cool with this rack mountable fan panel.Includes accommodations for one standard 4-5/8" x 4-5/8" (~120mm x 120mm) fan.Fan mounting holes are 4-1/8" o.c.Black powder coat finish.Flanged design for added rigidity.Constructed of .039"/1mm steel.Standard 19" rack width, 3 space (3U) 5-1/4" height.Fan sold separately.Mfg. #R1286/3UK/F1. ... Read more

Product Description

Features: 2 Phono, 2 Lines, 2 Aux, & 1 Mic Fader "Q" Start 100% Cut of treble, mid & bass Feather Fader plus with VCA control 3 position Fader Curve Hamster Switch Gain, treble, mid & bass control for each channel -30 dB rotary kills for treble, mid & bass Crossfader: Feather Feader plus (replaceable) Dimensions: 12.5" W x 10.25" D x 4" H 262 x 320 x 102 mm Weight: 8 lbs./3.5 kg ... Read more

Features

• 2 phono, 2 line, 2 aux, and 1 mic
• Fader Q Start
• Replaceable Feather Fader Plus with VCA control
• 100% cut of treble, mid, and bass
• 3-position fader curve selector

Reviews (1)

Jammin in tha hizzy
I hooked this little baby up to my two Pro Scratch 2's and it was a marriage made in heaven. I have had mine for about three years and no problems. I am about to order another one for my new system. I am gonna just keep jammin the night away !!!

DJ Sy Yung ... Read more

Product Description

Middle Atlantic's fan panels accommodate all standard 4-1/2" fans.3 rackspaces (5-1/4") high, they are made from 16-gauge flanged aluminum with a brushed, black anodized finish (unlike typical panels made of plain steel).Perfect for use with the #FAN 4-1/2" fan, sold separately. Accommodates two 4-1/2" fans. ... Read more

Product Description

The ART 311 Crossover may be used as a stereo 2-way crossover network and has the addition of a subwoofer output for low-frequency reinforcement. It employs 24dB/octave state-variable, fourth-order Linkwitz-Riley filters that guarantee properly phased outputs at all frequencies, which is optimal for the proper acoustic summing of common signals from adjacent drivers in the crossover region. Each channel features independent high and low output level controls and a crossover frequency rotary control which covers a wide range (250 Hz to 6 kHz). All three outputs have a 30 Hz low cut switch to eliminate low-end rumble. The subwoofer features an independent output level and rotary control for frequencies in the 50 Hz to 250 Hz range. Specifications: *Max input level: +21 dBu *Max output level: +21 dBu *Signal to noise ratio: 95 dB, unweighted. *Dimensions: 1.75" H x 19" W x 5.5" D. *Weight: 4.85 lbs. ... Read more

Features

• Stereo 2-way crossover
• Subwoofer output
• Fourth-order Linkwitz-Riley filters (24dB/octave state-variable)
• Independent high and low output level controls
• Crossover frequency rotary control (250 Hz to 6 kHz)

Product Description

Penn Fabrication...Supplying The Music Industry Since 1974. Black powder coated rack panel punched for 4 Cannon EP/Neutrik Speakon® connectors along with 8 Neutrik "D" Series XLR connectors.Made of 1.2mm/.047" steel.Dimensions: 19" W x 3-1/2" H (2U).Mfg. #R1273/2UK. ... Read more

Product Description

The MQX Series features all the performance and great sound of Ashly's legendary GQX models in a uniquely compact package. The same exacting filter design and summing circuitry of the GQX Series equalizers are utilized, with each filter exhibiting true constant Q response. Housed in a rugged steel chassis, each model features balanced inputs and outputs, with full ground lift provisions. Finally, a truly professional graphic equalizer in a smaller rack space package! *Dimensions: *MQX2310: 19"W x 3.5"H x 6"D ... Read more

Features

• Precision Wein-bridge filters for accurate response and low distortion
• Constant "Q" design for low ripple and minimum interaction
• High quality detented 25mm metal shaft faders with center-off position
• Balanced XLR and 1/4" TRS audio connections on all models
• Barrier strips on MQX-1310 and MQX-2310

Product Description

The MQX Series features all the performance and great sound of Ashly's legendary GQX models in a uniquely compact package. The same exacting filter design and summing circuitry of the GQX Series equalizers are utilized, with each filter exhibiting true constant Q response. Housed in a rugged steel chassis, each model features balanced inputs and outputs, with full ground lift provisions. Finally, a truly professional graphic equalizer in a smaller rack space package! *Dimensions: *MQX2150 19"W x 1.75"H x 6"D ... Read more

Features

• Precision Wein-bridge filters for accurate response and low distortion
• Constant "Q" design for low ripple and minimum interaction
• High quality detented 25mm metal shaft faders with center-off position
• Balanced XLR and 1/4" TRS audio connections
• Selectable 15dB or 6dB range

Product Description

The latest in performance mixers from Denon DJ. This 2-channel DJ mixer is loaded with features including crossfader and channel fader contour adjustment and reverse (hamster) function, program channel reverse function, 3-way "kill" switch, stereo send/return for external effects, mic effect loop, split cue headphone output, separate booth output, 6-way cueing system and more! ... Read more

Product Description

Penn Fabrication...Supplying The Music Industry Since 1974. Keep your gear secure, yet cool, with this perforated rack panel.Black powder coat finish.Flanged design for added rigidity.Constructed of .047"/1.2mm steel.Standard 19" rack width, 4 space (4U) 7" height.Mfg. #R1286/4U. ... Read more

Product Description

The XR Series crossovers all feature 24 dB per octave filters, infinitely variable crossover frequency and response, as well as both 1/4" TRS phone jacks and XLR connectors for all inputs and outputs. A peak overload indicator monitors all critical points in the circuit to ensure low-distortion operation. A recessed switch on the front panel with an LED indicator allows for either Normal or Divide by Ten frequency selection. The XR-1001 is a stereo two-way or mono three-way crossover. *Dimensions: *XR1001: 19"W x 1.75"H x 6"D ... Read more

Features

• 24dB/octave slopes, 20Hz third order high pass filter
• Variable filter allows tuning-in Linkwitz-Riley or other filter responses
• Output mute switches
• Balanced inputs and outputs
• XLR and 1/4" TRS audio connections

Product Description

4 CHANNEL MIXER WITH KILL FEATURE AND PUNCH BUTTONS ... Read more

Features

• 3 PHONO, 4 LINE, 1 MIC INPUTS; CROSS CURVE/CROSS INVERT SWITCHES
• KILL SWITCHES ON EACH CHANNEL; REPLACEABLE CROSSFADER
• LED OUTPUT DISPLAY; CUE SWITCH; DJ COMBO MIC
• MASTER/BOOTH/HEADPHONE LEVEL CONTROL
• PUNCH BUTTONS FOR CUTTING EFFECTS

Product Description

These attractive panels are made of 16-gauge, flanged aluminum with black anodized finishing.For standard 19" racks. Two space unitMfg# BL-2 3 1/2" height. ... Read more