Product Description

24k gold-plated contacts * 6-inch length ... Read more

Features

• Comes in a length of 6 inches
• Spiral wound copper shielding protects against outside interference.
• 24k gold contact, heavy-duty connectors for a high conductivity connection.
• Flexible outer jacket for easy installation.
• 1 male RCA connection is split into 2 female RCA connections

Amazon.com Product Description

Connect your Handspring Visor Edge to a USB port on your desktop PC or Mac with the Handspring HotSync cable. The cable comes with a one-year warranty. ... Read more

Features

• Synchronize with desktop PC or Mac via USB port
• Compatible with Visor Edge handhelds only
• 1-year warranty

Reviews (1)

Simple, works
Not a whole lot to it, but it works.It was nice taking it on vacation so I could backup the travel journal from the day.It's nice that it does have a plug for an AC adapter (same one that comes with the cradle) so you can charge the Visor Edge back at the hotel without lugging the cradle on the train (the bulk of that is annoying).I wish the cable was more flexible. ... Read more

Product Description

We improved our Dayton Loudspeaker distribution panel!Instead of a triple gang configuration we have designed it to fit into a standard dual gang electrical box, and its plastic instead of metal to better match the color and resist paint scratches!The panel gives you the ability to connect up to 10 pairs of speakers to a standard audio amplifier without the need for a speaker switching device. It is designed to be used in conjunction with Dayton Loudspeaker Impedance Matching Volume Controls. The distribution panel provides fast and easy installation in new construction and existing homes, offices and commercial buildings. The in-wall design hides the unsightly "bird's nest" of wires common behind large home and office sound systems.The removable PCB wiring connectors allow you to pre-wire your system during new construction before the drywall stage, reducing the risk of damage to the unit. The connectors make installation fast after construction. Comes complete with wall plate, hardware and installation instructions.Specifications: *Power Handling: 200 watts RMS per channel max *Outputs: Any combination up to10 pairs *Input wire (amp):Up to 10 ga (three-way binding post) *Output wire (speaker) Up to 14 ga (compression quick connects) *Mounting configuration: Standard dual gang electrical box *Dimensions: 4-1/2" H x 4-5/8" W x 1-3/4" D (depth in wall 3/4")Note: Must be used with impedance matching volume controls! ... Read more

Product Description

This popular Decora® wall switch mounts into any standard single gang outlet box. It allows the selection between two different input sources for the same speakers. It can be used in conjunction with either standard or impedance matching volume controls and can handle up to 150 watts of power. Screw type terminals accept up to 14 gauge wires. ... Read more

Reviews (1)

speaker switch
Great product, but bad directions. Figured it out tho ! Dayton has never let me down. Thanx Amazon ! ... Read more

Product Description

OmniView SOHO Series 4-Port KVM Switch with Audio PS/2 and USB Platform ... Read more

Features

• Updates firmware easily with flash feature
• Controls 4 computers from 1 keyboard, video monitor, and mouse
• Offers audio and microphone switching
• Supports video resolutions up to 2048 x 1536@85Hz
• Delivers uncompromising display quality

Reviews (17)

There are better KVM solutions
Besides the fact you have to buy the cables separately as others have mentioned, Belkin support is horrible. The automated system consistenly disconnects the call, requiring going through their operator. My 4-port KVM stopped functioning after six months. There's no information on the web to help either. It's as if there IS no way to fix a KVM that doesn't work. Flash upgrading is a joke. I followed the procedure directly from Belkin's website. So I had to RMA replace it. Trust me, Belkin doesn't care about its customers and arrogance will be their downfall. Go with IOGEAR - they include all the cables with the KVM switch for the price of Belkin's without cables.

Rip Off!
I'm evaluating the DVI version.The cables are sold seperately, so what's the point to buy a KVM without cables?!?

Lastly, hearing the problems doesn't surprise me, as working with the two port version, I had some problems where computers becames unresponsive.

DVI version sucks
cable won't fit

Power supply cable covers other connectors

mouse does not not work

includes flash update cable but web site has no flash images

If you don't plug a keyboard into it sits there and just beeps

What idiot designed this trash.

Just a warning from an experience with the DVI version
I'm extremely unhappy with the Belkin OmniView SOHO Series 4-Port KVM DVI Switch with Audio. I'm sure most of this applies for the VGA version

1) It is nearly impossible to connect a cable to the console DVI Connector. Belkin had to overnight a special extender to connect the monitor DVI cable to the KVM.
2) Connecting the Power Adapter to the KVM blocks one of the peripheral USB ports.
3) It's absolutely impossible to put on the cover (i.e. cable management cover) if you connect the four (Belkin) cables to it.
4) Connecting only two PCs with a resolution of 1600x1200 to the KVM resulted in green shadows for one connection. (both NVidia cards GeForce 4 (4200 series) and a Geforce 5 (5200 series)
5) The Microsoft Wireless Keyboard doesn't work as stated in the manual. I did manage to plug in the wireless dongle connector to the USB mouse port on the KVM but now I can't use the hotkeys to switch between computers. Belkin has also indicated that wireless keyboards don't always work as stated in the manual

6) There isn't a FAQ or software/firmware upgrade listed for this device. I would recommend checking out the belkin support pages or lack there of.

Solid KVM Switch With Audio
I bought this over a year ago, and am very pleased with it.

It was easy to set up, and works well with all my Windows XP Pro boxes.Switching between PCs is fast enough, with only about a second delay (typical of KVMs in general) to restore the mouse pointer.Once locked to a particular PC, the KVM is very stable.I've had no problems with either the video display or keyboard/mouse functionality on any of my Windows-based systems and can play games as well as perform all normal office-type tasks with no noticable performance degradation.

The only issue I have is with losing mouse control when switching to my Red Hat 9.0 server running X (not a big deal since I primarily access the terminal from the command line on remote anyway).There is no issue when I boot up the Linux box and use the KVM without switching to another workstation.I suspect the problem may be fixable, but it has never been enough of an issue for me to pursue it, given my needs.

The unit has the unique ability to support stereo audio as well as firmware upgrades.In addition, the cable management is cleverly built in to the sleek housing as opposed to completely exposed as in most square footprint KVMs, thus saving a small amount of desktop space.

Overall, in my experience, the Omniview has been a good KVM for the money.

Pros:

Supports Audio switching
Unique cable management design
Supports most common and higher-end video resolutions
No noticable performance loss with games or everyday tasks
Upgradable firmware

Cons:

Sketchy support for non-Windows OSes (though I haven't yet upgraded the firmware)
Does not support 5.1 channel audio
Requires specific type of KVM cable (male male)
cable management design can be limiting ... Read more

Product Description

This 350MHz CAT5E PVC stranded patch cord meets TIA/EIA 568A specifications, and support all CAT5E and other high speed applications. It has stranded wires for added cable flexibility. ... Read more

Features

• Rated beyond 350MHz -- over three times the Category 5 standard -- this CAT5e PVC Stranded Patch Cord provides flawless transmissions at the highest speeds
• Connects any CAT5 application such as computer to hub, patch panel or wall jack
• Perfect for use with 10Base-T - 100Base-TX and Gigabit Ethernet networks
• Meets TIA/EIA 568A specifications, and supports all CAT5e and other high speed applications
• Stranded wire for added cable flexibility

Product Description

The RJ45 Cat 5e patch is perfect for use with 10/100 Base-T networks.

Features

• Exceeds the performance requirement of Category 5e.
• Perfect in conjunction with 10 and 100 Base-T networks.
• 50-micron gold plated connectors to insure a clean and clear transmission.
• PowerSum tested.

Features

• Lifetime warranty
• 3-foot cable for connecting hardware destinations in a Local Area Network
• 50-micron gold-plated RJ45 male/male connectors ensure a clean and clear transmission
• Perfect in conjunction with 10 and 100 Base-T, and even 1000 Base-T networks
• Guaranteed for life

Reviews (4)

These cables are tops in any size
I bought these Belkin cables. They are very nice quality. They seem heftier than a lot of the other cables. My system analyst neighbor mentioned that he prefers to buy the 1000 foot roll. He runs them to wall outlets, then uses the 7 foot or 14 foot snap in cable from the wall to the PC. That way, you don't have to buy a 40 dollar crimping tool.
You can't solder these cables. They require a metal to metal contact, and lead-solder doesn't qualify. Also, it is critical to keep them spiraled, all the way up to the end. Even when attaching, instructions call for twisting them right up to the connection.
Since the tech instructions, tell you to keep them down to under 350 feet, these cables, whether they are long or short, are in the right lengths.
I know Amazon doesn't print prices in their reviews, but they have the local major chain office supply stores beat hands down. The 50 foot roll was half again as much locally.
These are the Category 5e cables. They give you a better return feed, which results in better overall performance. So insist on 5e instead of just 5. I initially bought some wall plates from (a nation wide electrical supply store) that were Category 3, then I returned those for the snap in option Category 5. Those were returned also, when I went to (a nation wide building supply center)... (of all places to go networking) and they had the complete Leviton line of 5e accessories.
If I had to do it over again, I would still buy the Belkin 50 footers. I don't want to have a 500 foot roll of ethernet cable hanging around.
These are tops. Gold plated connectors, Snag free ends, that protect that little lock in tab on the ends. You know the frustration of unsnarling a phone wire, out of a wiring mess, and the little tab bends over backwards, never to work properly again. Well Belkin built twin arches over the sides to prevent just that. Way to go. Highly recommended, good stuff, for a good price.

Does its job-5 Stars
No problems so far; does its job.(if you are setting up a wireless network, get windows XP. 1 click and you're set up.)

Great Cable
Littly pricy, but a great cable.You will plug this in and never getanother, so why not get it?You may want a longer one though, I just usethis from my cable modem to my router.

Love Belkin cable
If you want solid, well constructed cable that you are never going to have to think about again then Belkin is for you.I've never had one problem. ... Read more

Product Description

Capitalize on USB ready motherboards, with no external ports. Connect the Pro Series Motherboard cable to your computers motherboard, and screw on the mounting bracket. It’s that simple!

Features

• Supported by the Belkin lifetime guarantee.
• Permits you to take advantage of built-in USB motherboard capabilities for extra ports to plug in devices.
• Adds two USB A type female receptacles to your computer system.
• Install USB capabilities into your Macintosh® and PC quickly and easily.
• Adds two 12 Mbits/sec USB ports to your Macintosh® and PC so you can instantly connect any USB device.
• Compatible with Mac® OS 8.6 or higher or Windows® 98.
• 20-gauge, double shielded, power wire conductor construction.
• Impedance matched twisted pair construction to minimize cross talk, ensuring high speed, error-free transmission.
• Undermold shield helps to prevent radio frequency and electro-magnetic interference (EMI/RFI). Hood shielding eliminates antennae excitation.
• Foil and braid shield complies with fully rated cable specifications reducing EMI/RFI interference.
• Gold plated copper contacts provide maximum conductivity and minimizes data

Features

• Lifetime warranty
• Cable allows user to take advantage of built-in USB port on motherboard
• 2 USB Type A female receptacles
• Easy to install with plug-and-play
• Includes mounting bracket

Product Description

• High resolution VGA monitor replacement cable with male-to-male HDB15 connectors.
• 100% foil shield rejects RFI and EMI.
• 24k gold contacts provide error-free signal transfer and maximum corrosion resistance.
• Easy-to-handle oversized thumbscrews for quick, secure attachment.
• Special three-coaxial construction delivers higher resolution than standard VGA monitor cables.

Features

• Special three-coaxial-construction delivers higher resolution than standard VGA monitor cables
• High resolution VGA monitor replacement cable with male-to-male HDB15 connectors.
• 100% foil shield rejects RFI and EMI.
• 24k gold contacts provide error-free signal transfer and maximum corrosion resistance.
• Easy-to-handle oversized thumbscrews for quick, secure attachment.

Reviews (2)

It works - on a high end high bandwidth montor
I have a [$$$] 24" monitor running 1920x1280 screen resolution at high refresh rates..When I recently broke a pin on the video cable for it, I purchased the best cable they had, for some [$$$] at my local computer store.The image was blurred, with 3 or 4 ghost images a quarter inch off each other.

I immediately found this cable on Amazon, ordered itovernight,and took that other cable back -- for the refund it deserved.Now my image is back to one - no ghosts, no fuzziness.This cable seems 3 times thicker than the one I returned.And the screws are easy to use for my big old fingers.Sweet.

just get it
If you need a replacement cable for your monitor don't just buy the same cheap-o type that came with it. If you have a high quality monitor you will see the difference using this cable. If you have a cheap ($400) monitor you may not see the difference, but the cable will outlast your monitor. Its money well spent. Its a very high quality product. Cleared up a 'flicker' problem for me that was caused by a nearby electric sub-station. Good shielding. ... Read more

Product Description

75-ohm cable design * 70-strand, pure copper center conductor * triple shielding * 6-cut, gold-plated titanium RCA connectors ... Read more

Features

• 75-ohm cable design

Product Description

The RJ45 Cat 5e patch is perfect for use with 10/100 Base-T networks.

Features

• Exceeds the performance requirement of Category 5e.
• Perfect in conjunction with 10 and 100 Base-T networks.
• 50-micron gold plated connectors to insure a clean and clear transmission.
• PowerSum tested.

Features

• Call 1-800-878-8882 toll free for more information

Product Description

Better specs and lower cost than the competition! Lifetime warranty to the original owner. They feature quality construction, 5-stage chrome-finished connectors, stress relief, and heat-shielded center conductors. ... Read more

Features

• Velcro tie wraps
• Five-stage chrome finish connectors
• Stress relief
• Heat-shielded center conductors
• Lots of colors

Product Description

6 foot single link digital cable (DVI) - Digital Visual Interface ... Read more

Features

• High Speed Digital Transmission.
• Works with flat panels
• Works with PC and Mac
• Fully double shielded
• Compliant with DVI standards

Product Description

Don't want to use up your batteries? This power supply is for all Digitech "X" series pedals. ... Read more

Product Description

Undeniably the standard in music recording and post-production facilities worldwide. Until now Mogami was only available to professionals and then only in large bulk quantities. Finally, the world's best cable is available prewired, for all live performance and music recording applications. 1/4" to 1/4" phone plugs. ... Read more

Product Description

Dayton Audio Cables are designed for customers who want the best possible audio and video that they can get from today's high-end A/V components. A cheap interconnect cable on expensive equipment does not allow you to fully enjoy the technology that the component possesses.The design and construction of Dayton Audio Cables unleashes the signal allowing you to experience clear detailed audio and video.No need to spend a fortune on high-end cables to get the performance you demand from your components.Dayton Audio Cables have exactly what you need at a reasonable price.All cables feature a black chrome shell with a rubber grip for ease of installation and gold-plated connections for superior signal transfer. Dayton Audio digital optical cables are high performance cables for use as interconnects for hi-end A/V components with digital input and output jacks.These cables are designed for equipment that demand extreme clarity and definition and their attractive appearance reflect the quality of any hi-end component.The flexible 6mm jacket adds protection and easily routes to the desired location providing enhanced optical transfer with low signal loss.Available in 1.5, 3, 6 and 12 ft. lengths with Toslink style gold-plated connectors. ... Read more

Product Description

DVI Female To VGA Male Adapter ... Read more

Features

• DVI Analog -F to HD15 M
• Works with PC and Mac
• COMPLIANT WITH DVI STD

Product Description

A bolt of information shoots through your Belkin FireWire® cable to your PC. Now your digital camcorder is interfacing with your computer like never before. Finally, a high-speed serial bus that bridges the world of consumer electronics and computers. The IEEE 1394 FireWire® Compatible Cable attaches a PC device (6-pin port), to your computer (6-pin port) at a transmission rate of up to 400Mbps. Compatible with all Apple® FireWire® and Sony i.LINK® devices. ... Read more

Features

• Twisted pair construction for extreme velocity data transfer rates.
• Molded strain relief and PVC overmolding to ensure a lifetime of error-free data transmissions.
• Outer shield and inner shield (foil and braid) ensures compliance with the latest IEEE 1394 standards, which reduces radio frequency and electro-magnetic interference.

Product Description

This Switch provides an affordable KVM solution that saves workspace while giving you control of two PS/2 computers from one console. Its compact design with built-in cabling saves you time on installation, desktop space, and money. The Switch includes such features as audio and mic support, mouse and keyboard emulation to ensure smooth boot up and operation, as well as hot key functionality so you can switch ports easily through simple keyboard commands. The unit supports high-quality video resolution of up to 2048x1536@65Hz through its built-in coaxial VGA cabling. Its auto-scanning functionality, LED indicators, and PC99 color connectors make operation and organization easy.

• Offers a complete compact solution with audio support and built-in cables
• Features hot key switching
• Supports video resolutions up to 2048x1536@65Hz
• Includes automatic scanning function
• Requires no power supply
• Supports multiple operating systems
• Features LED indicators
• Offers keyboard and mouse emulation
• Installs easily
• Requires no additional cables

Features

• Supports resolutions up to 2048 x 1536
• Automatic scanning function and LED indicators
• Supports multiple operating systems
• Offers keyboards and mouse emulation