Product Description

This great-playing little axe features a smaller, lighter body that shoulders everywhere will appreciate. It has a bolt-on, 34"-scale maple neck (4 bolts) with a rosewood fretboard and dot inlays. Thick, durable, high-gloss finish on body, neck, and headstock. Chrome hardware. With split-coil pickup and tone and volume controls. A fine starter instrument with less heft and great playability! ... Read more

Features

• 34"-scale bolt-on neck
• Chrome hardware
• Split-coil pickup
• Tone and volume controls

Reviews (1)

No. Just...no.
(I reviewed this bass already, but Amazon has individual pages for the 3 colors...so my review for the black one doesn't show up on the blue or red pages. So with that in mind, I'll warn everyone just in case they chose this color over the black one.)

Since starting out as a musician, this is the single product that everyone can make fun of, and it's ok. If you say "Rogue Bass" in a group of experienced (4+ months even) musicians, everyone will laugh in unison at the joke you made. In music catalogues, you'll see this with "THE FIRST REAL BASS FOR UNDER [x dollars]". Cross out the "REAL" there and that's what you get. I played this thing back in 2000 and it was just awful. The sound was decent when it wasn't plugged in, but once it was, I felt bad for everyone around me. There's the saying that 'it's not the instrument, it's the one playing it". Well, that doesn't apply here. This is the kind of bass you'd expect to find at a garage sale. The kind that's been beaten to death by a shovel and then the wires were chewed up by a dingo with down's syndrome.

The only redeeming quality about this is that it's probably the single cheapest bass to exist. You're bound to find one better for even ten bucks more. If you're looking at getting a Rogue bass for your son or daughter as a gift, you'll only scar them emotionally and physically for the rest of their life/lives. It's more cheaply made than Joan Rivers' face. I feel bad even reviewing this thing and giving it my time. But I'm here to warn you people, this bass is on the list of "things that make baby Jesus cry". Look elsewhere for a beginner bass. Even Ibanez has a good starter model that constantly gets good feedback. ... Read more

Product Description

One of the most sinister basses crafted today starts with a mahogany body for thick tone and a maple neck for stability and articulation. Brutal sonics are delivered via dual split-coil pickups and an active EQ. An ebony fingerboard, killer black hardware, AA+ quilted maple top, and a matching headstock give it flash. ... Read more

Features

• Mahogany body
• AA+ quilted maple top
• Maple bolt-on neck
• 2 split coil pickups w/active EQ
• Ebony fingerboard

Product Description

Features a mahogany body for thick, rich tone and a stunning AA+ quilted maple top. The bolt-on maple neck has an ebony fingerboard that provides superb feel. 2 split pickups with an active EQ crank out monster tone with loads of variation. ... Read more

Features

• Mahogany body with AA+ quilted maple top
• Bolt-on maple neck
• Ebony fingerboard with 24 extra-jumbo frets and diamond inlays
• Adjustable bridge
• 34" scale

Product Description

This streamlined design is based on Gibson's original shape, with tuning keys reversed for greater functionality. 2 humbucking pickups, volume and tone controls. Alder and maple body, mahogany neck, rosewood fingerboard. Limited lifetime warranty. ... Read more

Features

• Streamlined design
• Tuning keys reversed for greater functionality
• Alder and maple body
• Mahogany neck
• Rosewood fingerboard

Reviews (1)

i love my t-bird!
it has great low sound, and can pull off the high notes too. great sound, i like being able to switch pickups while im playing, changing the sound. i got mine from musician's friend about 8 months ago and am loving it. only problem is that the neck is heavier than the body, so you have to hold the neck up with your left hand, but you'll quickly adapt. ... Read more

Product Description

The CA. Custom basses will feature Schecters traditional CET body, constructed from alder with a highly figured Maple top. Both 4 and 5 string versions will feature an bolt-on 35 scale rock maple neck for added low-end clarity. The gloss-finished neck has a 21-fret rosewood fingerboard inlaid with Black Pearl dots. ... Read more

Product Description

One of the most popular bass designs the Gravity 4X features a jazz and P-bass pick-up to allow the player to mold the sounds together. The Basses alder body gives a comfortable light weight feel without losing sustain. ... Read more

Features

• Alder body and maple neck
• Vintage style pick-ups
• P-Style Split Coil Humcancelling Bridge and a J-Style Single Coil
• 24 large frets

Product Description

This is a 7/8 Size Double Cutaway Bass from J. Reynolds with solid wood body, split pick-up, and die-cast machines. Available in black. Includes a gig bag. ... Read more

Product Description

Features an extended maple neck, rosewood fingerboard, covered traditional-style split and single-coil pickups, 2 volume and 2 tone controls, die-cast machine heads, and black hardware. Priced to make it easy to add a fretless to your arsenal. ... Read more

Features

• Select hardwood body
• Rosewood fingerboard
• Split-coil pickup with a single-coil at the bridge
• Two volume controls and two tone controls
• Black hardware

Product Description

You won't believe the great sound and consummate playability of this sonic destroyer. Features an extended maple neck, fast and friendly rosewood fretboard, covered traditional-style split and single-coil pickups, 2 volume and 2 tone controls, die-cast machine heads, and black hardware. ... Read more

Features

• Extended maple neck
• Fast and friendly rosewood fretboard
• Covered traditional-style pickups
• 2 volume and 2 tone controls
• Die-cast machine heads

Product Description

Clear well-defined tone, unstoppable sustain, and precise articulation are the hallmarks of the Killer B. Besides a great name, it features a 5-piece Asym neck with dual truss rod and mother-of-pearl position markers on a pau ferro fingerboard. 2-piece body in a choice of woods. Dual Bartolini pickups. Controls include mid cut/boost, pickup blend pan, master volume with push/pull slap switch. Grover tuners. Black hardware. Includes hardshell case. ... Read more

Features

• 5-piece Asym bolt-on neck
• Dual truss rod
• Pau ferro fingerboard
• Mother-of-pearl position markers
• 2-piece body

Product Description

The carved-top body is made of luthite and features an extended upper horn for strapped balance and a deep lower cutaway for unrestricted access to all frets. The rock-maple neck extends into the body all the way to the pickup for maximum vibration transfer. Electronics include a single, slim Bartolini passive humbucker wired to an active 9V circuit with 3-band EQ and a "slap" contour switch with adjustable bass and midrange boost (accessed from the rear). Controls also include volume, treble cut, mid boost/cut and bass boost/cut knobs on the front. The fingerboard is made of Ebanol and polished to a mirror finish. It all adds up to a cutting-edge, premium-quality bass for a very affordable price. ... Read more

Features

• Carved-top body is made of luthite
• Features an extended upper horn for strapped balance
• Deep lower cutaway provides unrestricted access to all frets
• Rock-maple neck extends into the body all the way to the pickup for maximum vibration transfer
• Neck is fastened securely by 5 bolts

Product Description

First introduced to the USA over 30 years ago the Integra (IGB) collection has a bass to suit all playing styles and budgets. Features include Ash carved top, maple 34" scale bolt on neck with rosewood fingerboard, 24 frets, Infinity double coil neck and Infinity stacked coil bridge pick up, 2 volume and 1 tone controls and matt chrome hardware. Comes with a limited lifetime warranty. ... Read more

Product Description

It's beautifully made and has that characteristic low growl for which Warwicks are famous. As with all Warwicks, it features premium tonewoods throughout: a bubinga body and 3-piece ovangkol neck with wenge fingerboard. This is a passive bass with a traditional tone and incredible punch. Fitted with MEC J/J pickups, MEC passive electronics, and chrome hardware. Includes deluxe gig bag. ... Read more

Features

• Bubinga body
• Ovangkol 3-piece neck
• Wenge fretboard
• MEC J/J pickups
• Passive MEC electronics

Product Description

Machines: Chrome diecast

Neck: Rosewood fretboard, 24 fret, joint bushing neck joint

Body: Solid wood

Pickup: 1 split and 1 standard pickup

Controls: 2 volume, 1 tone

Pickguard: None

Knob: Metal chrome

Bridge and Tail: Standard

Hardware: Chrome

Note: 5 string verion of AB400


Electric Bass Guitar Cases that fit this guitar:
Bass Guitar Case (MI-SFR4)
Electric Bass Lightweight Molded Case (MI-MBTEBCL)
Electric Bass Guitar Bag (MI-MBTBGB) ... Read more

Product Description

It is often said that "beauty is skin deep". The Dean Edge Bass is clearly the exception to the rule! While beauty was the inspiration of the Dean Edge, we put every bit of our 20 plus years of design experience into these models. We started with a body styled and contoured for comfort and the choice basswood to make them lighter. The maple necks were profiled to be faster and sleeker than virtually all others. We designed a "uniquely Dean" custom neck joint and heel along with our asymmetrical 4 bolt pattern creating uninterrupted access all the way up the two octave neck. ... Read more

Product Description

Designed for the bass player who prefers 4-strings but would like the lower notes that a 5-string provides. It's tuned B/E/A/D and has an extended 35" set-in, 22-fret neck for greater tension and integrity in the lowest notes. Dual graphite reinforcement rods add sustain, clarity, and stability. 2 EMG HZ bass humbuckers coupled with an active 2-band EQ give this bass the power to cut through walls of sound. Black hardware, white neck binding, and its "devil" headstock set it apart from the crowd. ... Read more

Product Description

It is often said that "beauty is skin deep". The Dean Edge Bass is clearly the exception to the rule! While beauty was the inspiration of the Dean Edge, we put every bit of our 20 plus years of design experience into these models. We started with a body styled and contoured for comfort and the choice basswood to make them lighter. The maple necks were profiled to be faster and sleeker than virtually all others. We designed a "uniquely Dean" custom neck joint and heel along with our asymmetrical 4 bolt pattern creating uninterrupted access all the way up the two octave neck. ... Read more

Product Description

The i4 is a totally new bass design in the i2000 series. This instrument features 3-piece neck-thru construction and a stunning, highly figured maple top. The comfort-contoured ash body and sides are easy playing and lightweight. Active electronics mated with the soapbar pickups makes for one stoked-up tone machine! ... Read more

Features

• Unique scuplted headstock
• Neck thru construction of maple/padouk/maple
• Lightweight ash body-sides
• Highly figured maple top with matching figured headstock
• 24 fret neck

Product Description

The selected poplar body is tightly fitted to the neck with 6 bolts for enhanced resonance. Egg-shaped diamond plate aluminum pickguard looks way cool and resists marring. Chromeplated steel bridge plate with stainless saddles. 34" scale and 11" radius fretboard. ... Read more

Product Description

Chesswood body with an AA quilt top for the transparent colors. Hard maple neck with rosewood fretboard, extra-jumbo frets, big diamond inlays, and Beast-style headstock. 2 B.C. Rich special-design split-coil pickups with active circuit. Controls include volume, blend, plus treble boost and bass boost. Cosmo black hardware. ... Read more