Product Description

Save BIG when you buy today! ... Read more

Product Description

2x750W @ 4 ohms, 2x1400W @ 2 ohms. Bridged mono: 1600W @ 8 ohms, 2400W @ 4 ohms. Includes a continuously variable-speed fan with back-to-front air flow, user-defeatable clip limiter, switchable 30Hz low-cut filter, balanced XLR and 1/4" TRS inputs, detent volume controls, stereo or bridged mono operation, binding post and Neutrik Speakon outputs, and ground-lift switch. Protection features include soft-start turn on, noise-free on/off, built-in DC offset, independent DC and thermal overload protection, short circuit and speaker protection, and built-in current limiter. Parallel outputs allow daisy-chaining. Clip and signal LED indicators for each channel. Durable steel casing. 2U rackmount. ... Read more

Features

• 2x750W @ 4 ohms, 2x1400W @ 2 ohms. Bridged mono: 1600W @ 8 ohms, 2400W @ 4 ohms
• Continuously variable-speed fan with back-to-front air flow
• User-defeatable clip limiter
• Switchable 30Hz low-cut filter
• Balanced XLR and 1/4" TRS inputs

Product Description

This exciting preamp features a tube input stage, compressor with variable threshold and rate controls, tube character control, enhance control, and Eden's famous semi-parametric EQ. It also features D.I. output control on the front of the unit, a mono pre-EQ loop, stereo post-EQ, side-chain loop with front panel blend pot, variable crossover, stereo LED ouptut meters, tuner out, stereo and mono XLR ouptuts, and a defeatable limiter. Also, front-panel controls for compressor defeat, enhance, mute-to-tune, and turbo boost are duplicated on a footswitch with lighted indicators that connects via a standard MIDI cable. ... Read more

Features

• Tube input stage
• Compressor with variable threshold and rate controls
• Tube character control
• Enhance control
• Semi-parametric EQ

Product Description

2x500W @ 4 ohms, 2x800W @ 2 ohms. Bridged mono: 1000W @ 8 ohms, 1400W @ 4 ohms. Includes a continuously variable-speed fan with back-to-front air flow, user-defeatable clip limiter, switchable 30Hz low-cut filter, balanced XLR and 1/4" TRS inputs, detent volume controls, stereo or bridged mono operation, binding post and Neutrik Speakon outputs, and ground-lift switch. Protection features include soft-start turn on, noise-free on/off, built-in DC offset, independent DC and thermal overload protection, short circuit and speaker protection, and built-in current limiter. Parallel outputs allow daisy chaining. Clip and signal LED indicators for each channel. Durable steel casing. 2 rackspaces. ... Read more

Features

• 2x500W @ 4 ohms, 2x800W @ 2 ohms. Bridged mono: 1000W @ 8 ohms, 1400W @ 4 ohms
• Continuously variable-speed fan with back-to-front air flow
• User-defeatable clip limiter
• Switchable 30Hz low-cut filter
• Balanced XLR and 1/4" TRS inputs

Product Description

Plug in the XA-1600 and put some punch in your sound system! Features 675W RMS @ 4 ohms stereo or 1,600W bridged mono. Detent volume controls, parallel balanced XLR and 1/4" TRS inputs. Stereo (dual channel), parallel input, or bridged mono modes with selector switch. Binding post (banana plug) outputs. 2 dual-speed fans for cooling, and soft-start turn on with noise-free on-off prevents annoying pops. Built-in DC protection, independent DC and thermal overload on each channel, short circuit and speaker protection, DC servo operation, and digital limiter. Includes power on, clip, signal, and protect LED indicators for each channel. Rugged 2U rackspace housing. ... Read more

Features

• 675W RMS @ 4 ohms stereo or 1,600W bridged mono
• Detent volume controls
• Parallel balanced XLR and 1/4" TRS inputs
• Stereo (dual channel), parallel input, or bridged mono modes with selector switch
• Binding post (banana plug) outputs

Product Description

Heavy 28-1/2 oz. magnet and 2" voice coil drive the broad cone with tight efficiency and punchy power. Treated cloth surround and rugged basket provide long life and enduring sound quality. 120W handling. ... Read more

Features

• Heavy 28-1/2 oz. magnet
• 2" voice coil
• Treated cloth surround
• Rugged basket
• 120W handling

Product Description

The first micro bass system from Eden, this tiny 10" combo will handle 5-string basses and is deep enough for uprights. The tone is deep and solid on the low end, well-defined and open in the midrange with a smooth, flawless transition to the coax tweeter. 3-band EQ, dbx-style compression, optically-coupled dynamic booster system for bass and treble, an assortment of patch points, and balanced DI output. ... Read more

Features

• 200W @ 8 ohms
• Perfect for small gigs, rehearsals, and studio work
• Warm studio-quality sound with very low noise
• Handles 5-string basses and is deep enough for uprights
• Deep and solid low-end tone

Product Description

Its distortion falls somewhere between a 6L6GC and a 6550A. In older Marshalls that have 6550s, this tube will give you more compression and distortion at lower levels than other 6550 offerings. Terrific in Class A amps such as the GT Solo Single when you want to have a lot of output for smaller live venues. ... Read more

Features

• High compression and distortion at low levels
• Great in Class A amps
• Sweet distortion quality

Product Description

Chinese made copy of the classic KT66, great sounding but not quite as nice as the KT66HP, but less money too. New and exclusive GT design. An exact copy of legendary Gold Lion "valve" from the Eric Clapton "Blues Breaker" Marshall combo. Considered by many (including us!) to be the ultimate tube for guitar amps. Big fat bottom, crisp highs, very warm and a springboard response that make playing fun again! Highly recommended for Fender type amps. ... Read more

Product Description

Popular for its soft breakup and the warmer tone that results from its lighter-weight plate structure. Providing good tone for the money, it"s slightly less powerful, with attenuated top end. Lightweight design means it"s looser and easily overdriven. Somewhat shorter life span but it"s slightly less expensive too. ... Read more

Features

• Classic reissue
• Soft break up
• Warm tone
• Good value
• Easily overdriven

Product Description

Save BIG when you buy today! ... Read more

Product Description

Slovakian-made with high power and very aggressive dynamic tone with more highs and lows...punchier sounding but still a sweet tone. New GT design with heavy-duty components. ... Read more

Features

• Slovakian-made
• High power and very aggressive dynamic tone
• Punchier sounding but still a sweet tone
• New GT design with heavy-duty components for long life

Product Description

Chinese made copy of the classic KT66, great sounding but not quite as nice as the KT66HP, but less money too. New and exclusive GT design. An exact copy of legendary Gold Lion "valve" from the Eric Clapton "Blues Breaker" Marshall combo. Considered by many (including us!) to be the ultimate tube for guitar amps. Big fat bottom, crisp highs, very warm and a springboard response that make playing fun again! Highly recommended for Fender type amps. ... Read more

Product Description

Slovakian-made with high power and very aggressive dynamic tone with more highs and lows...punchier sounding but still a sweet tone. New GT design with heavy-duty components. ... Read more

Features

• Slovakian-made
• High power and very aggressive dynamic tone
• Punchier sounding but still a sweet tone
• New GT design with heavy-duty components for long life

Product Description

Save BIG when you buy today! ... Read more

Product Description

Hand-picked Tesla with lower gain and a full, robust tone. All Ruby output tubes are labeled on the base with the exact matching measurements for plate current and transconductance. By matching these parameters, optimal performance and long life are ensured. Comes with a 6-month replacement warranty. ... Read more

Features

• Lower gain, full robust tone
• Labeled on the base with plate current and transconductance
• Matched parameters for optimal performance and long life
• 6-month replacement warranty

Product Description

300watts @4ohms ... Read more

Features

• The RMX Series is packed full of professional features that increase performance and flexibility:
• Independent defeatable clip limiters reduce distortion without sacrificing peak performance
• Selectable low-frequency filters boost system response, protect speakers, and ensure low-end tightness by more precisely matching the amplifier’s range to the loudspeakers

Product Description

Slovakian-made with high power and very aggressive dynamic tone with more highs and lows...punchier sounding but still a sweet tone. New GT design with heavy-duty components. ... Read more

Features

• Slovakian-made
• High power and very aggressive dynamic tone
• Punchier sounding but still a sweet tone
• New GT design with heavy-duty components for long life