Product Description

Common to many medium powered amps such as the Fender Blackface amps. This is the factory selected rectifier for the Mesa Dual and Triple rectifier series. Common to medium powered amps like the earlier Fender Super Reverbs and Bandmasters. May be used replaced a 5Y3 for improved dynamics and power. Also some players have replaced their 5AR4 (GZ34) with the 5U4 in their Vox AC30 amps to reduce heat and extend the life of the power tubes, we recommended this as a "stability enhancer", if you can live with the slightly lower power. ... Read more

Product Description

With a Kapton bobbin, a British-manufactured paper cone, and a power rating of 80W, it delivers the extended power handling capabilities and balanced tone that make it a great choice for rock or metal guitarists. Ferrite magnet. 1.75" voice coil diameter. Pressed steel basket. Includes a 7-year manufacturer's defect warranty. ... Read more

Product Description

Save BIG when you buy today! ... Read more

Product Description

The G40V is an all tube combo at a great price. It has 4 and 8 ohm output jacks, controls for volume, master volume, treble, mid, bass & presence. Built like the time-tested tube amps of the 60s and it sounds great. It has two 6L6s & three 12AX7s for that tone that only a tube amp can deliver. ... Read more

Features

• 40W of power
• 10" special design speaker
• Pre-amp has 3 - 12AX7s
• Output has 2 - 6L6s
• Controls: volume, treble, mid, bass, and presence

Product Description

Popular for its soft breakup and the warmer tone that results from its lighter-weight plate structure. Providing good tone for the money, it"s slightly less powerful, with attenuated top end. Lightweight design means it"s looser and easily overdriven. Somewhat shorter life span but it"s slightly less expensive too. ... Read more

Features

• Classic reissue
• Soft break up
• Warm tone
• Good value
• Easily overdriven

Product Description

Load your amp or speaker cab with these and you may never need to replace them. 1.25" voice coil diameter. 15 oz. magnet. 50W handling. 100W peak. ... Read more

Features

• 1.25" voice coil diameter
• 15 oz. magnet
• 50W handling
• 100W peak
• 8 or 16 ohm impedance

Product Description

Plug in the XA-2100 and put some punch in your sound system! Features 870W RMS @ 4 ohms stereo or 2,100W bridged mono. Detent volume controls, parallel balanced XLR and 1/4" TRS inputs. Stereo (dual channel), parallel input, or bridged mono modes with selector switch. Binding post (banana plug) outputs. 2 dual-speed fans for cooling, and soft-start turn on with noise-free on-off prevents annoying pops. Built-in DC protection, independent DC and thermal overload on each channel, short circuit and speaker protection, DC servo operation, and digital limiter. Includes power on, clip, signal, and protect LED indicators for each channel. Rugged 2U rackspace housing. ... Read more

Features

• 870W RMS @ 4 ohms stereo or 2,100W bridged mono
• Detent volume controls
• Parallel balanced XLR & 1/4" TRS inputs
• Stereo (dual channel), parallel input, or bridged mono modes with selector switch
• Binding post (banana plug) outputs

Product Description

The newest version, identical to original Gold Lion specs from the "60s. New exclusive GT design with special heat wings attached to the plate for more power, longer life, and better tone. Great in Ampeg SVT and hi-fi amps. Used by many high-end manufactures such as Matchless, McIntosh, and Cary Audio. 15% higher output (may actually run too hot in some applications). Punchy, tight tone with excellent bass response. Popular with heavy metal and speed players looking for a very clean output section where most distortion comes from the preamp, pedals, or effects. ... Read more

Features

• Big bottom
• Great dynamics
• More power
• Longer life
• Punchy, tight tone

Product Description

Don't Model The Original... Be The Original. Randall and legendary amp guru, Bruce Egnater, have joined forces in designing the new MTS (Modular Tube System). This 4-channel preamp gives all the flexibility of any digital modeling amp, but does it with all-tube circuitry, based on the original circuit specifications. Change your amp tone as often as you like....perform classic rock with the Marshall Super Lead module or heavy metal with the Ultra distortion module on the fly, all in one preamp! ... Read more

Features

• Chassis holds your choice of up to 4 pre-amps from Randall"s 11 modules
• Connects to any power amp to create your dream gig rig
• Tube-buffered effects loop and parallel effects loop with front-panel mix control
• Series effects loop
• Front- and rear-panel inputs

Product Description

This is Eden's newest generation of Bass Amplifiers. The Time Traveller features a warm studio sound quality, and very low noise levels. A redesigned sloped front panel allows easy access to the simplified control section with mid shift and bypass. A dbx style compressor with adjustable threshold is coupled to dual inputs and the renowned Eden enhance control. The Time Traveler has an entirely new feature: an optically coupled dynamic smart booster foe Bass and Treble. This allows for the Bass and Highs to be solid and well defined from a whisper to a roar. ... Read more

Features

• Compact and light
• 400W into four ohms
• EQ controls include two shelving and three semi-parametrics
• Automatic compression with bypass switch
• Rackmounts with included hardware

Product Description

This design is from the Ei factory located in the former Yugoslavia. It's an excellent quality large-plate European-made driver tube, styled after the famous Telefunkin line of dual triodes. The usual application for a 12AU7 is as the phase inverter that drives the power tubes. These are very well matched, and so are highly recommended for Ampeg SVT's and other amps using this tube as a phase inverter. These are commonly used as phase inverters in McIntosh Hi-Fi amps, some Ampeg amps, and will yield the most clean headroom in many amps. In the latest Fender Pro Series amps such as the Pro Reverb, Concert, and Twin, this tube in V2 (or a 12AY7), will drop the gain of the gain channel where some feel the tone is of a less intense or "buzzy" character. This will then allow a much wider range in the sweep of the volume and gain controls of this channel. ... Read more

Product Description

Experience the evolution of modern amp design with the HD-147. Line 6's crack team of shredder amp and sound designers altered the basic building blocks of coveted vintage and modern tube amps to get 14 truly evolved custom Line 6 amp models. ... Read more

Features

• Evolved Tone 8 Coveted Vintage Amp Models 10 Essential Modern Tones 14 "Other Worldly" Custom Tones from crystal clean to grinding mayhem Mix and Match cabinet models Award-winning amp tone available at the stereo XLR direct outputs
• Obscenely Loud 300-watt Stereo Current Based Power Amp Thick 'n' Fast Low End Headroom for Days
• Premium Effects 12 Vintage effect models based on award-winning Line 6 Delay and Modulation Modeler Pedals
• Connectivity MIDI compatibility allowing access to deep editing and the ToneTransfer Library (coming soon)

Product Description

An exact copy of the UK tube that was used in Groove Tubes" Bluesbreaker amps. Huge tone, very warm and round, plus a big bass. ... Read more

Product Description

2x750W @ 4 ohms, 2x1400W @ 2 ohms. Bridged mono: 1600W @ 8 ohms, 2400W @ 4 ohms. Includes a continuously variable-speed fan with back-to-front air flow, user-defeatable clip limiter, switchable 30Hz low-cut filter, balanced XLR and 1/4" TRS inputs, detent volume controls, stereo or bridged mono operation, binding post and Neutrik Speakon outputs, and ground-lift switch. Protection features include soft-start turn on, noise-free on/off, built-in DC offset, independent DC and thermal overload protection, short circuit and speaker protection, and built-in current limiter. Parallel outputs allow daisy-chaining. Clip and signal LED indicators for each channel. Durable steel casing. 2U rackmount. ... Read more

Features

• 2x750W @ 4 ohms, 2x1400W @ 2 ohms. Bridged mono: 1600W @ 8 ohms, 2400W @ 4 ohms
• Continuously variable-speed fan with back-to-front air flow
• User-defeatable clip limiter
• Switchable 30Hz low-cut filter
• Balanced XLR and 1/4" TRS inputs

Product Description

Featuring Eden's first discrete FET preamp and a 400W fire-breathing power stage, it uses the same driver elements used in the company's renowned cabs. Eden's acclaimed EQ system coupled with a compressor defeat control, tuner out jack, effects loop, aux input, headphone out, DI output with level control and groundlift, constant-speed fan, and universal power transformer offer the capabilities pro bassists demand. The rugged cab has ergonomic side handles, a folding top handle, and back casters for easy handling. ... Read more

Features

• Frequency response 40hz-20khz
• Power @ 8 ohms 225W
• Power @ 4 ohms 400W
• Solid state, discrete FET pre-amp
• Compressor defeat switch

Product Description

Install these corners on amplifiers with solid backs. These nickel-plated steel corners are designed for Ó in. wood cabinets where a panel must be removed. Each corner comes complete with two 8 x Ó in. Phillips-head wood-mounting screws. ... Read more

Product Description

Save BIG when you buy today! ... Read more

Product Description

Plug in the XA-1600 and put some punch in your sound system! Features 675W RMS @ 4 ohms stereo or 1,600W bridged mono. Detent volume controls, parallel balanced XLR and 1/4" TRS inputs. Stereo (dual channel), parallel input, or bridged mono modes with selector switch. Binding post (banana plug) outputs. 2 dual-speed fans for cooling, and soft-start turn on with noise-free on-off prevents annoying pops. Built-in DC protection, independent DC and thermal overload on each channel, short circuit and speaker protection, DC servo operation, and digital limiter. Includes power on, clip, signal, and protect LED indicators for each channel. Rugged 2U rackspace housing. ... Read more

Features

• 675W RMS @ 4 ohms stereo or 1,600W bridged mono
• Detent volume controls
• Parallel balanced XLR and 1/4" TRS inputs
• Stereo (dual channel), parallel input, or bridged mono modes with selector switch
• Binding post (banana plug) outputs

Product Description

6V6-C Silver Series (tube prices are for single tube quanties) - For detailed description of this tube, please see the GT description of the GT labelled product. Groove Tubes Silver Series are tested and warranteed to meet or exceed factory specifications but are not sold in matched sets or premium selected grades as are our traditional Groove Tubes product line. Silver Series tubes are excellent for 'normal' tube replacement applications and offer exceptional value. We do not recommend these for the critical high gain V1 stages of high gain guitar amps, but we do recommend these for the other less critical stages such as V2-V6 stages. If you need a selected low noise, non microphonic tube for your V1 high gain stages, please choose a hand selected ultra premium tube from our traditional Groove Tubes preamp tube selection. ... Read more