Product Description

Popular for its soft breakup and the warmer tone that results from its lighter-weight plate structure. Providing good tone for the money, it"s slightly less powerful, with attenuated top end. Lightweight design means it"s looser and easily overdriven. Somewhat shorter life span but it"s slightly less expensive too. ... Read more

Features

• Classic reissue
• Soft break up
• Warm tone
• Good value
• Easily overdriven

Product Description

Celestion Blue Classic Series 12-Inch Guitar Loudspeaker With Alnico Magnet. (Aluminium-Nickel-and Cobalt) Originally Designed In The 50s, The World's First Dedicated Guitar Loudspeaker Which Helped Shape The Sound Of The Early Vox and Marshall Amps. Rated At 15 Watts (RMS) With A Frequency Response Of 75Hz-5kHz. ... Read more

Product Description

A Russian EL84, this is the most common low-power pentode, popularized in early Vox AC30 amps. Rediscovered by Matchless amps and now currently used by nearly every tube amp company. Quick, soft overdrive distortion, great for recording with low volume output. ... Read more

Features

• Russian EL84
• Quick, soft overdrive distortion
• Great for recording
• Low volume output
• High quality

Product Description

A problem for decades has been the guitar player getting his amp from the van to the stage without damage. Many amps weigh in at nearly 100 pounds. The Gator Amp Transporter is the solution. Made from their Semi-hard technology, the case is 600-denier ballistic material on the exterior with a 1/2 inch wooden interior frame covered in 20mm military spec foam with Tricro interior to protect the amp. Heavy-duty wheels and pull-out handle make the transporter a dream to move over long distances. ... Read more

Features

• Dimensions:
• 25(l) x 12(w) x 19
• 5(d)
• Amplifiers that will fit into this case include the following (list is not all-inclusive):
• Ampeg J-12T

Product Description

Originally designed in the '50s and used in early Vox and Marshall amplifiers. Uses an Alnico magnet. Known for its exceptional tonal definition and dynamic range. Best suited for low-power Class A tube amplifiers. Handles 15W. ... Read more

Features

• Designed in the '50s
• Used in early Vox and Marshall amps
• Uses an Alnico magnet
• Best suited for low-power Class A tube amps
• Handles 15W

Product Description

Thirty Class A watts cranking through 100% valve signal paths with high-end British craftsmanship result in full, glassy clean tones with a very musical and consistent overdrive. Two independent channels, each with separate boost and reverb controls. Series/parallel effects loop, six-spring Accutronics reverb. Includes two-button footswitch. Optional five-way footswitch lets you run both channels simultaneously with boost from either. ... Read more

Features

• Thirty Class A stereo watts RMS, all tube
• Two channels, footswitchable
• Two-button footswitch
• Six-spring Accutronics reverb
• 25"W x 10"H x 11"D

Product Description

With 700W + 50W, the 1001RB II is capable of driving multiple cabinets with ease while maintaining sound integrity and response at the highest sound levels. Link it up to two RBH horn-loaded cabinets and you've got a full stage unit that'll rock any house. Power<1% THD: Low 700W @ 4ohms, 460W @ 8ohms 1kHz. / High 50W @ 8ohms, 5kHzCooling: Continuously Variable Speed Fan90dB, Clip LED, 10db Pad, Volume, Mute Switch and Mute LEDVoicing Filters: 5/4 String Bass, Adjustable Contour and presenceEqualizer: Bass Specific Series Four Band ActiveOutput: Boost, Tweeter Level with High Cut Switch and Woofer Level with Crossover SwitchDirect Out: XLR, Level Control, Ground Lift and Pre/Post SwitchesSpeaker Connectors: Two 1/4" Two Speakon Style ConnectorsWeight: 18lbsDimensions: 17.5"W x 3.5"Hx 8"D ... Read more

Features

• Extremely high-current power supply
• High-current power amp circuitry
• 700W to woofer
• 50W to horn
• Electronic crossover for seamless 2-way sound

Product Description

Designed for the bass player wanting a high-power driver. The B15 offers punchy mids and earthshaking lows. Great for 1 x 15" combos or 2 x 15" enclosures. 8 ohm. 300W. ... Read more

Product Description

Save BIG when you buy today! ... Read more

Product Description

An exact copy of the UK tube that was used in Groove Tubes" Bluesbreaker amps. Huge tone, very warm and round, plus a big bass. ... Read more

Product Description

This Russian-made pentode is standard issue on many UK amps and has great durability. As with most Russian power tubes the break up is a bit harsh and they lack high end as compared to the true European models. Unique sound, slightly edgy distortion when pushed hard. The most reliable of all in this family. ... Read more

Product Description

The best Eminence all-purpose, broad bandwidth, bass guitar speaker! This unit exhibits lots of punch and is great for Pop and Slap Bass, Jazz and RockânâRoll. The efficiency of the whizzer cone eliminates the need for a tweeter. This speaker is an ideal replacement or upgrade for bass players. ... Read more

Features

• Impedance: 8 ohms
• Power Rating: 200Wrms
• Usable Bandwidth (Fs to -3dB):40Hz - 9kHz

Product Description

Used by almost every major amp manufacturer of the '60s, this classic design has been sought after ever since. Sweet midrange coupled with quick, dynamic response throughout combines with incredible resilience to make it an industry standard. 50W handling, 1-1/2" voice coil, 28-3/5 oz. magnet. ... Read more

Features

• A '60s cornerstone
• Sweet midrange
• Quick, dynamic response throughout
• Amazing resilience
• 50W handling

Product Description

6V6-C Silver Series (tube prices are for single tube quanties) - For detailed description of this tube, please see the GT description of the GT labelled product. Groove Tubes Silver Series are tested and warranteed to meet or exceed factory specifications but are not sold in matched sets or premium selected grades as are our traditional Groove Tubes product line. Silver Series tubes are excellent for 'normal' tube replacement applications and offer exceptional value. We do not recommend these for the critical high gain V1 stages of high gain guitar amps, but we do recommend these for the other less critical stages such as V2-V6 stages. If you need a selected low noise, non microphonic tube for your V1 high gain stages, please choose a hand selected ultra premium tube from our traditional Groove Tubes preamp tube selection. ... Read more

Product Description

Highest power pentode for use in Marshall, Hiwatt, Ampeg SVT, the GT amps and a few other higher powered amps. Also popular for HiFi amps. Newest entry, power and quality should mean long life. Excellent response, yet it"s easier to push into distortion than 'A' version, a little harder sounding than 'C' ... Read more

Product Description

Save BIG when you buy today! ... Read more

Product Description

Features: Both XLR and 1/4" inputs LED display with clip indicators Compact - Only 2-rack spaces (3.5") high Dual speed fan with heatsinks Reset breaker on front panel Built-in overload protection limiter Short circuit protection circuitry Front panel mode indicators Stereo or bridged modes Size: 19"w x 15.9"d x 3.5"h. Stereo (per channel) 650W @ 2 ohms 450W @ 4 ohms 280W @ 8 ohms Bridged Mono 1290W @ 4 ohms 900W @ 8 ohms ... Read more

Features

• Packed with the features and power that DJs and clubs need to get the music pumping.